T Features This series is currently available but not recommended for new designs. PL IA N n Combines ADSL2+ / VDSL2 splitter with LE AD F RE E *R oH S C OM twisted pair to coaxial adapter n Saves space by only occupying a single position in standard NIDs n Fast and easy installation n Service interoperability and compatibility with most existing NIDs 3617-02 n Bus mount - occupies one position in the NID VDSL-POTS Splitter-Filter-BalUn Ro VE LEA HS RS D C ION FRE OM S E PL AR IA E NT * Bourns® 3617-02 VDSL-POTS Splitter-Filter-BalUn combines a 75 to 100 ohm impedance matching circuit with the circuitry of our 3610A2 series ADSL2+/VDSL2 POTS Splitter. The 3617-02 is optimized for video with specialized circuitry to withstand ring trip currents as high as 400 mA. The 3617-02 is designed to be compatible with various types of NIDs. The 3617-02 is ANSI T1.413 compliant and meets the requirements of ITU G.992.3 and G.992.5 and can be used with ADSL, ADSL2+, VDSL and VDSL2. The POTS splitter circuit accept the incoming combined voice & data service, filters off the voice (POTS) channel and provides a connection point to the impedance matching circuit. In the event of power loss, the passive filter design allows for lifeline POTS service. The impedance matching circuit (BalUn) is designed to increase reach and reduce loss on ADSL2+ and VDSL2 applications where conversion from twisted pair to coaxial cabling is required. The 3617-02 is configured with twisted pair leads for connection to the station protector, Insulation Displacement Connectors (IDCs) for connection of the twisted pair home run, “F” coax connector for connection to home coax cable and an integrated subscriber test jack. A ground wire connection is provided for shielding of the POTS splitter circuitry. Characteristics Twisted Wire Port Impedance ............................................................................................................... 100 Ω Coax Port Impedance............................................................................................................................. 75 Ω Withstand Voltage.................................................................................................................................. DC 33 V, 2 sec (Ico=10 mA) Insulation Resistance............................................................................................................................. >10 MΩ (DC 250 V) Insertion Loss (Typical).......................................................................................................................... 0.55 dB @ 25 kHz 0.13 dB @ 138 kHz 0.22 dB @ 3.75 MHz 0.28 dB @ 5.8 MHz 0.35 dB @ 8.5 MHz Return Loss (Typical)............................................................................................................................. 7.83 dB @ 25 kHz 21.47 dB @ 138 kHz 29.49 dB @ 3.75 MHz 32.13 dB @ 5.8 MHz 31.92 dB @ 8.5 MHz DC Loop Current.................................................................................................................................... 0-100 mA DC Loop Voltage.................................................................................................................................... 0 to -60 V DC Resistance....................................................................................................................................... ≤25 ohms Insertion Loss (Voice Band)................................................................................................................... <1.0 dB Attenuation Distortion (Voice Band)....................................................................................................... < ±1.5 dB Delay Distortion (Voice Band)................................................................................................................ <200 μs Return Loss (Voice Band)...................................................................................................................... 8 dB ERL; 5 dB SRL-Low; 5 dB SRL-High Longitudinal Balance, Two Port Technique, POTS to Line Port (U-R); Line Port to POTS.................... >58 dB @ 0.2 to 1 kHz >53 dB @ 3 kHz XDSL Band Attenuation.......................................................................................................................... >65 dB @ 30 kHz - 300 kHz >55 dB @ 301 kHz - 20 MHz Tip to Ring Capacitance (POTS Port).................................................................................................... <115 nF Input Impedance (Loading the ADSL Band)........................................................................................... <0.25 dB @ 30 kHz - 30 MHz Storage and Operating Temperature...................................................................................................... -55 to +85 °C How To Order Bus Mount.............................................................................................................................................. Part #3617-02 50 units per carton *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 81.28 (3.2) 81.28 (3.2) 56.13 (2.21) 25.40 3617-02 VDSL-POTS Splitter-Filter-BalUn (1.0) 56.13 (2.21) Product Dimensions 81.28 (3.2) 56.13 (2.21) 25.40 (1.0) DIMENSIONS: MILLIMETERS (INCHES) Installation Diagrams Fits Uni-NID OR Fits NI-2000 P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN PROTECTOR P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN GROUND (BLACK) GROUND (BLACK) (BLACK) BUS BAR P/N 85410 MOUNTING ADAPTER TO “DIPLEXER” AND/OR GROUND (BLACK) “SET TOP BOX” BUS BAR POTS PROTECTOR TO “DIPLEXER” AND/OR P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN BUS BAR “SET TOP BOX” POTS FROM C.O. Fits 7600 NID AVAILABLE SEPARATELY: BUS BAR ADAPTER P/N 85410 P/N 85410 MOUNTING ADAPTER FOR 2003 / 2006 TYPE NIDS P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN AVAILABLE SEPARATELY: ADAPTER P/N 85410 FOR 2003 / 2006 TYPE NIDS GROUND (BLACK) P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN GROUND (BLACK) TO “DIPLEXER” AND/OR “SET TOP BOX” BUS BAR BUS BAR P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN POTS FROM C.O. GROUND (BLACK) GROUND (BLACK) ENCLOSURE, BOTTOM ENCLOSURE, BOTTOM P/N 3617-02 VDSL-POTS SPLITTER-FILTER-BALUN GROUND (BLACK) REV. C 01/16 P/N 85410 MOUNTING ADAPTER AVAILABLE SEPARATELY: ADAPTER P/N 85410 FOR 2003 / 2006 TYPE NIDS Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com ENCLOSURE, BOTTOM Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.