PL IA N T Features M ■ Miniature package for design flexibility *R oH S CO ■ Long operating life ■ Conductive plastic element ■ Bushing or PC board mount ■ Quadrature output ■ RoHS compliant* 3315 - 9 mm Square Sealed Incremental Encoder Electrical Characteristics Output..................................................................................2-bit quadrature code, Channel A leads Channel B electrically turning clockwise (CW) Closed Circuit Resistance ...............................................................................................................................................................5 ohms maximum Contact Rating........................................................................................................................................................................... TTL compatible loads Insulation Resistance (500 VDC) .......................................................................................................................................1,000 megohms minimum Dielectric Withstanding Voltage Sea Level ..................................................................................................................................................................................900 VAC minimum Electrical Travel ......................................................................................................................................................................................... Continuous Contact Bounce .................................................................................................................................................................... 5 milliseconds maximum RPM (Operating) ...................................................................................................................................................................................120 maximum Environmental Characteristics Operating Temperature Range.........................................................................................................................-40 °C to +125 °C (-40 °F to +257 °F) Storage Temperature Range ............................................................................................................................ -55 ºC to +125 ºC (-67 °F to +257 °F) Humidity .................................................................................................................................................... MIL-STD-202, Method 103B, Condition B Vibration ...............................................................................................................................................................................................................30 G Contact Bounce ..............................................................................................................................................................5.0 millisecond maximum Shock .................................................................................................................................................................................................................100 G Contact Bounce ..............................................................................................................................................................5.0 millisecond maximum Rotational Life ..................................................................................................................................................................... 100,000 cycles @ 6 PPR 25,000 cycles @ 16 PPR IP Rating .............................................................................................................................................................................................................. IP 67 Mechanical Characteristics Mechanical Angle .............................................................................................................................................................................360 ° Continuous Running Torque .........................................................................................................................................................3.53 N-cm (5 oz.-in.) maximum Mounting Torque Plastic Bushing ..................................................................................................................................................45.19 N-cm (4.0 lb.-in.) maximum Metal Bushing.........................................................................................................................................................79 N-cm (7.0 lb.-in.) maximum Weight .............................................................................................................................................................................................. 4.5 gm (0.15 oz.) Terminals .............................................................................................................................................................................................Solderable pins Soldering Condition Manual Soldering ..................................... 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds Wave Soldering .............................................................. 96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max. for 5 seconds Wash Processes ..............................................For recommended wash processes, please refer to http://www.bourns.com/pdfs/sldclen.pdf Marking.................................................................................................................................Manufacturer’s trademark, part number, and date code Hardware .................................... One lockwasher and one mounting nut are shipped with each encoder, except where noted in the part number. Suggested Incremental Control Diagram Quadrature Output Table CW (CUSTOMER LOGIC CIRCUITRY) 7 9 Channel A DIRECTION 5 ms DELAY DEBOUNCE (MC 14490) DECODE LOGIC UP/DOWN COUNTER MAGNITUDE BINARY OUTPUT Channel B Channel C CCW *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 3315 - 9 mm Square Sealed Incremental Encoder How to Order 3315 Y - 0 0 1 - 006 L Model Number Designator 3315 = 9 mm Encoder Terminal Style Designator C = In-line Straight Terminals Side Exit R = In-line Terminals Rear Exit P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit Shaft End Designator 0 = Shaft End Slotted 1 = Shaft End Flatted Shaft Length Designator 0 = 12.7 mm FMS Long Plastic Shaft (Available w/bushing only) 1 = 19.05 mm FMS Long Plastic Shaft (Available w/bushing only) 2 = 5.59 mm FMS (Bushingless version only) Bushing Designator 1 = 6.35 mm x 6.35 mm Plastic 2 = 6.35 mm x 6.35 mm Ni Plated Brass 5 = Bushingless (Board Level) Pulses per Revolution Code 006 = 6 PPR 016 = 16 PPR RoHS Identifier L = Compliant Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 3315 - 9 mm Square Sealed Incremental Encoder Product Dimensions 3315C-001 COMMON DIMENSIONS 3315-001 3315Y-001 9.53 ± .25 (.375 ± .010) C Plastic Bushing Slotted Shaft 9.53 ± .25 (.375 ± .010) 9.53 ± .25 A (.375 ± .010) B 9.53 ± .25 (.375 ± .010) .51 ± .05 DIA. (.020 ± .002) SOLDER PLATED COPPER PINS B B C 5.97 ± .89 (.235 ± .035) A 2.54 ± .25 (.100 ± .010) .391 ± .38 (.154 ± .015) A C 3315P-001 4.83 ± .25 (.190 ± .010) 4.75 MIN. FULL (.187) THREAD 5.18 ± .38 (.204 ± .015) 6.35 ± .08 (.250 ± .003) MOUNTING DIA. COMMON DIMENSIONS 3315C-101 2.54 ± .25 (.100 ± .010) R .76 ± .25 DEEP (.030 ± .010) 5.97 ± .89 (.235 ± .035) 3315R-001 4.78 (.188) 2.54 ± .25 (.100 ± .010) 4.83 (.190) 12.70 ± .64 (.500 ± .025) FROM MOUNTING SURFACE A 2.54 ± .25 (.100 ± .010) DIMENSIONS: 2.54 ± .25 (.100 ± .010) 4.78 (.188) 6.35 ± .08 (.250 ± .003) MOUNTING DIA. 5.97 ± .89 (.235 ± .035) .51 4 PLACES (.020) MOUNTING HOLE PATTERN 1.70 ± 0.03 (.067 ± .001) DIA. MOUNTING SURFACE 2.39 (.094) C B .38 (.015) MIN. STANDOFF Plastic Flatted Shaft 4.83 ± .38 (.190 ± .015) .76 ± .05 X .76 HIGH (.030 ± .002 X .030) ANTI-ROTATION BOSS 7.62 (.300) DIA. MOUNTING SURFACE 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) ADJUSTMENT SLOT .64 ± .10 WIDE (.025 ± .004) X 2.54 ± .38 (.100 ± .015) A 9.53 ± .25 (.375 ± .010) B 6.35 (.250) 12.70 ± .64 (.500 ± .025) 5.97 ± .89 (.235 ± .035) 9.53 ± .25 (.375 ± .010) C DIA. 3.18 ± .05 (.125 ± .002) 2.54 ± .25 (.100 ± .010) 5.08 ± .25 (.200 ± .010) 2.54 ± .25 (.100 ± .010) 1/4-32 UNEF-2A THREADED PLASTIC BUSHING MOUNTING SURFACE .38 (.015) MIN. STANDOFF 2.54 ± .25 (.100 ± .010) 6.53 ± 0.03 (.257 ± .001) DIA. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 3312--92mm 3315 mmSquare SMD Sealed Trimming Incremental Potentiometer Encoder Product Dimensions 3315P-101 COMMON DIMENSIONS C 3315P-002 3315-002 C Metal Bushing A B A B 9.53 ± .25 (.375 ± .010) 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) 9.53 ± .38 (.375 ± .015) 5.97 ± .89 (.235 ± .035) 2.54 ± .25 (.100 ± .010) .51 ± .05 DIA. (.020 ± .002) SOLDER PLATED COPPER PINS 2.54 ± .25 (.100 ± .010) 4.83 ± .38 (.190 ± .015) 3315R-101 5.97 ± .89 (.235 ± .035) 2.54 ± .25 (.100 ± .010) 1/4-32 UNEF-2A THREADED PLASTIC BUSHING MOUNTING SURFACE C .38 (.015) MIN. STANDOFF A B 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) 5.97 ± .89 (.235 ± .035) 5.11 ± .25 (.201 ± .010) 4.83 ± .38 (.190 ± .015) 3315R-002 6.35 ± .08 (.250 ± .003) MOUNTING DIA. A B 5.97 ± .89 (.235 ± .035) 3.18 ± .05 (.125 ± .002) DIA. 2.54 ± .38 (.100 ± .015) .76 (.029) 6.35 (.250) 12.70 ± .64 (.500 ± .025) 6.35 ± .64 (.250 ± .025) ADJUSTMENT SLOT .64 ± .10 WIDE (.025 ± .004) 2.54 ± .25 (.100 ± .010) C 3315Y-002 C .76 ± .25 X DEEP (.030 ± .010) 3315Y-101 B C R A B 2.54 ± .25 (.100 ± .010) .76 ± .05 X .97 HIGH 7.62 (.030 ± .002 X .038) (.300) ANTI-ROTATION DIA. MOUNTING BOSS SURFACE 2.54 ± .25 (.100 ± .010) .38 (.015) MIN. STANDOFF .76 2 PLCS. (.030) 5.97 ± .89 (.235 ± .035) 5.08 ± .25 (.200 ± .010) 5.08 ± .38 (.200 ± .015) A 5.97 ± .89 (.235 ± .035) 2.54 ± .38 (.100 ± .015) DIMENSIONS: MM (INCHES) 3315C-002 2.54 ± .38 (.100 ± .015) B C A 5.6 ± .51 (.220 ± .020) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 3312--92mm 3315 mmSquare SMD Sealed Trimming Incremental Potentiometer Encoder Product Dimensions 3315P-025 3315Y-025 Bushingless Bushingless C C A 9.53 ± .25 (.375 ± .010) B 5.97 ± .89 (.235 ± .035) 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) .51 ± .05 7.62 ± .20 DIA. DIA. (.020 ± .002) (.300 ± .008) SOLDER PLATED 6.35 ± .20 COPPER PINS DIA. (.250 ± .008) .38 MIN. STANDOFF (.015) 2.54 ± .25 (.100 ± .010) .51 ± .05 DIA. (.020 ± .002) SOLDER PLATED COPPER PINS 5.97 ± .89 (.235 ± .035) .38 MIN. STANDOFF (.015) 5.08 ± .25 (.200 ± .010) 3.18 ± .05 DIA. (.125 ± .002) 4.83 ± .38 (.190 ± .015) .51 ± .10 (.020 ± .004) 9.53 ± .25 A (.375 ± .010) B 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) 9.53 ± .25 (.375 ± .010) 2.54 ± .38 (.100 ± .015) 5.59 ± .38 (.220 ± .015) 5.18 ± .64 (.204 ± .025) 5.18 ± .64 (.204 ± .025) 5.59 ± .38 (.220 ± .015) ADJUSTMENT SLOT .64 ± .10 WIDE (.025 ± .004) X .76 ± .25 DEEP (.030 ± .010) .38 (.015) MIN. STANDOFF .38 (.015) MIN. STANDOFF DIMENSIONS: REV. 10/12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES)