GW Package 44-Lead Plastic SSOP (Wide .300 Inch) (Reference LTC DWG # 05-08-1642) 44 23 1.40 ±0.127 17.73 – 17.93* (.698 – .706) 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 10.804 MIN 7.75 – 8.258 10.11 – 10.55 (.398 – .415) 1 0.520 ±0.0635 22 0.800 BSC RECOMMENDED SOLDER PAD LAYOUT 7.417 – 7.595** (.292 – .299) 0.254 – 0.406 × 45° (.010 – .016) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 0.355 REF 2.286 – 2.388 (.090 – .094) 2.44 – 2.64 (.096 – .104) 0° – 8° TYP 0.231 – 0.3175 (.0091 – .0125) 0.40 – 1.27 (.015 – .050) NOTE: 1. CONTROLLING DIMENSION: MILLIMETERS MILLIMETERS 2. DIMENSIONS ARE IN (INCHES) 0.800 (.0315) BSC 0.28 – 0.51 (.011 – .02) TYP *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.152mm (0.006") PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.254mm (0.010") PER SIDE 0.1 – 0.3 (.004 – .0118) G44 SSOP 0204