MATERIAL DECLARATION SHEET Material Number SRR1205-series Product Line SHIELDED SMD POWER INDUCTOR Compliance Date 2009.07.02 RoHS Compliant No. YES Construction Element(subpart) MSL Homogeneous Material 1 Material weight [mg] 1 Ferrite Material F4D 1490 2 Winding Wire 2SFBW 450 3 Solder Lead free-solder 10 4 BASE LCP 200 5 BASE Terminal Electrode C5191/Sn/Ni 160 6 TAPE #560S 30 7 Adhesive 6020H-2 Total weight Headquarters Riverside CA 110 Homogeneous Material\ Substances Iron oxide (Fe2O3) Nickel oxide (NiO) Zinc oxide (ZnO) Copper oxide(CuO) Copper (Cu) Polyester Resin Tin (Sn) Silver (Ag) Copper (Cu) Aromatic polyester resin Phosphor bronze Tin (Sn) Nickel (Ni) Nomex Bisphenol A Epoxy Resin Alkyd glycidyl ether Methyl imidazole Carbon black Silicon dioxide 60 10 20 10 95 5 96.5 3 0.5 Material Mass % of total unit wt. 36.48 6.08 12.16 6.08 17.5 0.9 0.386 0.012 0.002 Subpart mass of total wt. (%) 6088-52-0 100 8.2 8.2 N/A 7440-31-5 7440-02-0 N/A 90 7 3 100 5.9 0.4 0.2 1.2 25068-38-6 63 2.835 68609-97-2 3 0.135 693-98-1 5 0.225 1333-86-4 7631-86-9 3 26 0.135 1.17 CASRN if applicable Materials Mass % 1309-37-1 1313-99-1 1314-13-2 1317-38-0 7440-50-8 N/A 7440-31-5 7440-22-4 7440-50-8 60.8 18.4 0.4 6.5 1.2 4.5 2450 www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 1 of 2 MATERIAL DECLARATION SHEET This Document was updated on:10-28-2010 Important remarks: 1. It is the responsibility of the user to verify they are accessing the latest version. Headquarters Riverside CA www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 2 of 2