3223

PL
IA
N
T
Features
LE
AD
F
RE
E
*R
oH
S
C
OM
n Surface Mount 3 mm Square / Multiturn
Cermet / Industrial / Sealed
n Sealed to withstand standard board wash processing
n Pick and place centering design for automated placement compatibility
n Flush adjustment screw
Electrical Characteristics
3223 - 3 mm SMD Trimpot® Trimming Potentiometer
Product Dimensions
Ro VE LEA
HS RS D
C ION FRE
OM S E
PL AR IA E
NT
*
Standard Resistance Range
Side Adjust
Side Adjust
.......................10 ohms to 2 megohms 3223J 3223J
0.40
3.90.40
3.9
3.18
3.18
(see standard resistance table)
(.016) (.016)
(.154) (.154)
(.125) (.125)
Resistance Tolerance............ ±20 % std.
1
1
Absolute Minimum Resistance
............................ 1 % or 3 ohms max. 2
2
3.9
3.9
(.154) (.154)
(whichever is greater)
3
3
Contact Resistance Variation
............................ 3 % or 3 ohms max.
ELECTRICAL
ADJUSTMENT
SLOT
ELECTRICAL
ADJUSTMENT
SLOT
0.38
0.38
0.30
WIDE X
(whichever is greater)
WIDE X 0.30
DEEP
DEEP
(0.014) (0.014)(0.011) (0.011)
2.77
Resolution.................. Essentially infinite 2.77
0.72
0.72
0.62
0.62
(.109)
Insulation Resistance................500 VDC (.109)
(.028) (.028)
(.024) (.024)
0.13
0.13
100 megohms min.
(.005) (.005)
Dielectric Strength
Sea Level.............. 600 VAC (1 minute)
0.99
0.30.99
0.3
Adjustment Angle..............11 turns nom.
(.039) (.039)
(.012) (.012)
Environmental Characteristics
0.56
(.022)
0.56
(.022)
0.78
(.031)
0.78 4.47
(.031)(.176)
4.47 0.88
(.176)(.035)
236
M
M
2.76
ELEC.
ELEC. ADJ.
SLOTADJ. SLOT 2.76
0.38
0.38
(0.109)
WIDE X WIDE X (0.109)
3.9
3.9
(0.014) (0.014)
(0.153) (0.153)
0.30
0.30
DEEP
DEEP
(0.011) (0.011)
Mechanical Stop................... Wiper idles
Torque............................. 2.50 oz-in. max
RECOMMENDED
LAND PATTERN
RECOMMENDED
LAND PATTERN
Weight................ Approximately 0.01 oz.
3.52
3.52
1.3 1.3
1.3
1.3
Marking
Manufacturer’s code, 2.43 (0.051)
2.43 (0.051)(0.051) (0.051) (0.139) (0.139)
resistance code and date code (0.096) (0.096)
Solderability................Per MIL-STD-202,
4.16
Method 208
(0.164)
Wiper................ 50 % (Actual TR) ±10 %
2.8
2.8
Flammability..............................UL94V-0
1.6
1.6
(0.110) (0.110)
Adjustment Tool........................... H-92-1 (0.063) (0.063)
0.81
0.63
0.63
0.9 0.81
0.9
(0.032) (0.025)
(0.035) (0.035)(0.032) (0.025)
0.22REF. 0.22
2 PLCS. 2 PLCS.
REF.
(0.009) (0.009)
3.9
(.154)
3.18
(.125)
3.18
(.125)
3.9
(.154)
1
1
2
2
3
3
2.77
(.109)
ELECTRICAL
ADJUSTMENT
SLOT
ELECTRICAL
ADJUSTMENT
SLOT
0.38
0.38
0.30
WIDE X
WIDE X 0.30
DEEP
DEEP
(0.014) (0.014)(0.011) (0.011)
0.77 0.99
0.77 0.99
(.030) (.039)
2.77(.030) (.039)
(.109)
0.13
(.005)
0.3
(.012)
1.25
0.56 (.049)
(.022)
0.3
(.012)
0.56
(.022)
1.25 5.32
(.049) (.209)
5.32 1.25
(.209) (.049)
0.13
(.005)
1.25
(.049)
RECOMMENDED
LAND PATTERN
RECOMMENDED
LAND PATTERN
1.4
(.055)
2 PLCS. 2 PLCS.
0.94.4
0.9
1.4
(.035) (.035)
(.173)
(.055)
2.8
(.110)
2.8
(.110)
DIMENSIONS:
TOLERANCES:
LEAD
LEAD
FOOTPRINT
FOOTPRINT
REF.
REF.
1.3
1.3
(.051) (.051)
2.0
2.0
(.079) (.079)
MM
(INCHES)
0.25 EXCEPT WHERE NOTED
(.010)
2
CCW
4.4
(.173)
2.0
(.079)
2.0
(.079)
WIPER
3
1
CW
CLOCKWISE
How To Order
3223 W - 1 - 502 E
Model
4.16
(0.164)
3.9
(.154)
3.9
(.154)
236
2.31
2.31
(0.090) (0.090)
Side Adjust
3223G3223G
Side Adjust
0.88
(.035)
Power Rating (200 volts max.)
RECOMMENDED
LAND PATTERN
RECOMMENDED
LAND PATTERN
70 °C................................... 0.125 watt
2 PLCS. 2 PLCS.
0.94.0
0.9
4.0
150 °C........................................ 0 watt
1.4
1.4
(.035) (.035)
(.157) (.157)
LEAD
LEAD
(.055)
(.055)
Temperature Range.... -65 °C to +150 °C
FOOTPRINT
FOOTPRINT
REF.
REF.
Temperature Coefficient.... ±100 ppm/°C
2.8
2.8
Seal Test...85 °C Fluorinert†/60 seconds
(.110) (.110)
1.3
1.3
Humidity........MIL-STD-202 Method 106
(.051) (.051)
1.6 1.6
1.6
1.6
TRS ±3 %; IR 10 megohms
(.063) (.063)(.063) (.063)
Vibration......20 G TRS ±1 %; VRS ±1 %
Shock........100 G TRS ±1 %; VRS ±1 %
Load Life
Top Adjust
3223W3223W
Top Adjust
0.56
.........@ 70 °C rated power 1000 hours 0.56
3.18
3.18
CRV.............................. 4 ohms or 4 % (0.022) (0.022)
3.9
3.9
(0.125) (0.125)
2 PLCS. 2 PLCS.
0.98
0.98
(0.153) (0.153)
(whichever is greater)
(0.039)
(0.039)
2
2
1
Rotational Cycling..................200 cycles 1
1.97
1.97
100 100
CRV.............................. 4 ohms or 4 %
(0.077) (0.077)
3223W3223W
(whichever is greater)
3
Thermal Shock...........................5 cycles 3
TRS ±2 %; VRS ±2 %
Physical Characteristics
n Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint
n Top and side adjust
n RoHS compliant* - see processing
information on RoHS compliant surface mount trimmers
n For trimmer applications/processing guidelines, click here
Style
Standard Product Indicator
-1 = IR Reflow (Standard)
Resistance Code
Embossed Tape Designator
E = 500 pcs./7 ” Reel (Standard)
Tape and reel material meets Antistatic ANSI/
ESD 5541-2003 packaging standards.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
†“Fluorinert” is a registered trademark of 3M Co.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
1.75±.10
(.069±.004)
1.5+.10/–.00
(.059+.004/–.000)
DIA.
4)
1.5
MIN.
(.059)
2.00±.05
(.079±.002)
5±.10
±.004)
4.00±.10
(.157±.004)
4.26±.10
(.168±.004)
8.00±.10
(.315±.004)
3223 - 3 mm SMD Trimpot® Trimming Potentiometer
7±.25
±.010)
8±2.03
0±.080)
-.000
-.000)
6.35
MAX.
Packaging Specifications
(.250)
Standard Resistance Table
.04
MAX.
(.002)
4.75
MAX.
(.187)
4.5±0.1
.04
(.177±.004)
MAX.
(.002)
4.81
MAX.
(.189)
12.00±.30
(.472±.012)
4.05
MAX.
(.159)
1.75±.10
(.069±.004)
5.5±.05
(.217±.002)
4.42±0.1
(.174±.004)
12.00±.30
1.5+.10/–.00
(.472±.012)
(.059+.004/–.000)
DIA.
1.75±.10
5.5±.05
(.217±.002)
1.5
MIN.
(.059)
(.069±.004)
2.00±.05
(.079±.002)
4.00±.10
1.5+.10/–.00
(.157±.004)
(.059+.004/–.000)
DIA.
8.00±.10
(.315±.004)
1.5
MIN.
(.059) 3.85±.10
(.152±.004)
2.00±.05
(.079±.002)
4.00±.10
(.157±.004)
4.26±.10
(.168±.004)
8.00±.10
(.315±.004)
5.64
MAX.
(.222)
6.35
MAX.
.04
(.250) MAX.
(.002)
.04
MAX.
(.002)
5.3±0.1
(.209±.004)
4.5±0.1
(.177±.004)
5.5±.05
(.217±.002)
5.5±.05
(.217±.002)
4.05
MAX.
(.159)
4.81
MAX.
(.189)
12.00±.30
(.472±.012)
12.00±.30
1.75±.10
(.472±.012)
(.069±.004)
1.75±.10
(.069±.004)
1.5+.10/–.00
(.059+.004/–.000)
1.5+.10/–.00
DIA.
(.059+.004/–.000)
2.00±.05
DIA.
(.079±.002)
2.00±.05
4.00±.10
(.079±.002)
(.157±.004)
4.00±.10
(.157±.004)
4.26±.10
(.168±.004)
1.5
MIN.
(.059)
1.5
MIN.
(.059)
8.00±.10
(.315±.004)
8.00±.10
(.315±.004)
3.85±.10
(.152±.004)
TAPE
1.78±.25 EQUALSPACED
3PLCS.
(.070±.010)
13.0±.51 DIA.
(.512±.020)
21.01±.79
DIA.
(.827±.031)
12.00±.30
(.472±.012)
1.5+.10/–.00
(.059+.004/–.000)
DIA.
2.67±.25
(.105±.010)
6.35
MAX.
(.250)
5.5±.05
(.217±.002)
1.75±.10
178±2.0
DIA.
(.069±.004)
(7.008±.079)
12.4+2.01/-.000
(.488+.079/-.000)
REEL
1.5
MIN.
2.00±.05
(.059)
Covertapepeelstrength:MeetsEIAspecification481.
(.079±.002)
4.00±.10
(.157±.004)
8.00±.10
(.315±.004)
3.85±.10
(.152±.004)
TAPE
(.069±.004)
1.5+.10/–.00
(.059+.004/–.000)
DIA.
2.00±.05
(.079±.002)
1.5
MIN.
(.059)
4.00±.10
(.157±.004)
8.00±.10
(.315±.004)
1.78±.25 EQUALSPACED
3PLCS.
(.070±.010)
13.0±.51 DIA.
(.512±.020)
21.01±.79
DIA.
(.827±.031)
4.05
4.05 MAX.
MAX.
(.159)
(.159)
12.00±.30
12.00±.30
(.472±.012)
(.472±.012)
1.75±.10
1.75±.10
(.069±.004)
(.069±.004)
178±2.0
DIA.
(7.008±.079)
1.5+.10/–.00
5.64
MAX.
4.75 2.67±.25
MAX.
(.222)
(.187)(.105±.010)
.04
MAX.
.04
MAX.
(.002)
(.002)
59.18±2.03
5.3±0.1
4.42±0.1
(2.330±.080)
(.209±.004)
(.174±.004)
4.75
MAX.
(.187)
5.5±.05
5.5±.05
(.217±.002)
(.217±.002)
.04
MAX.
(.002)
4.05
MAX.
(.159)
12.4+2.01/-.000
(.488+.079/-.000)
1.5+.10/–.00
(.059+.004/–.000)
(.059+.004/–.000)
DIA.
1.5
DIA.
MIN.
2.00±.05
1.5
REEL
(.059)
MIN.
2.00±.05
(.079±.002)
(.059)
(.079±.002)
4.00±.10
Covertapepeelstrength:MeetsEIAspecification481.
4.00±.10
(.157±.004)
(.157±.004)
MM
8.00±.10
(INCHES)8.00±.10
(.315±.004)
(.315±.004)
12.00±.30
(.472±.012)
1.75±.10
(.069±.004)
1.5+.10/–.00
(.059+.004/–.000)
DIA.
2.00±.05
(.079±.002)
4.00±.10
(.157±.004)
1.78±.25 EQUALSPACED
3PLCS.
(.070±.010)
5.5±.05
TAPE
4.26±.10
DIMENSIONS:
4.26±.10
(.168±.004)
(.168±.004)
13.0±.51 DIA.
(.512±.020)
(.472±.012)
Popular values listed in boldface. Consult
factory
(.217±.002)
1.75±.10
for special
resistances.
4.26±.10
(.168±.004)
.04
MAX.
(.002)
59.18±2.03
(2.330±.080)
4.5±0.1
(.177±.004)
4.81
MAX.
(.189)
ResistanceResistance
(Ohms)
Code
10
100
20
200
50
500
100101
200
201
500
501
1,000
102
2,000
2025.64
5,000
502(.222) MAX.
10,000
103
20,000
203 .04 MAX.
50,000
503 (.002)
100,000
104
4.05
MAX.
200,000
204 5.3±0.1
(.159)
500,000
504
(.209±.004)
1,000,000
105
2,000,000
205
12.00±.30
4.42±0.1
(.174±.004)
5.5±.05
(.217±.002)
1.5
MIN.
(.059)
REV. 05/16
“Trimpot” is a registered trademark of Bourns, Inc.
Specifications are subject to change without notice.
4.26±.10
8.00±.10
The device characteristics and parameters in this data sheet can and do vary in different applications and
actual device performance may vary
over time.
21.01±.79
(.168±.004)
DIA.
(.315±.004)
Users should verify actual
device performance in their specific
applications.
(.827±.031)
2.67±.25
(.105±.010)