PL IA N T Features CO M ■ Split knurled or plain shaft options *R oH S ■ DPDT push-pull switch ■ Metal bushing and shaft ■ Carbon element ■ Linear and audio taper options ■ RoHS compliant* PDB183-GTR - 17 mm Guitar Potentiometer w/Push-Pull Switch Electrical Characteristics Taper.................................. Linear, audio Standard Resistance Range ........................10K ohms to 1M ohms Standard Resistance Tolerance....±20 % Residual Resistance ................ 1 % max. Environmental Characteristics Operating Temperature ..................................-10 °C to +50 °C Power Rating Linear ..................................... 0.2 watt Audio ...................................... 0.1 watt Maximum Operating Voltage Linear .........................................200 V Audio ..........................................150 V Sliding Noise........................47 mV max. Mechanical Characteristics Mechanical Angle ................... 300 ° ±5 ° Rotational Torque ...........30 to 100 g-cm Stop Strength..................... 5 kg-cm min. Rotational Life...................15,000 cycles Switch Life ........................15,000 cycles Switch Type .................................. DPDT Switch Travel ..................... 4.3 ± 0.2 mm (.169 ± .008 in.) Soldering Condition Manual/Wave .........260 °C max. for 3 seconds max. Wash ..................... Not recommended Hardware .............. Two flat washers and two mounting nuts supplied per potentiometer Product Dimensions PDB183-GTR01, PDB183-GTR02 6.0 ± 0.3 (.236 ± .012) 12.5 ± 0.5 (.492 ± .020) (18 TEETH) 2.0 ± 0.3 (.079 ± .012) 1.0 ± 0.3 (.039 ± .012) 3/8 ” X 0.75 (.030) 2.5 ± 0.3 (.098 ± .012) 4.1 ± 0.3 (.161 ± .012) 6.0 ± 0.3 DIA. (.236 ± .012) (PLAIN SHAFT) 14.45 ± 0.5 (.569 ± .020) 4.0 ± 0.3 (.157 ± .012) 4.0 ± 0.3 (.157 ± .012) 0.6 ± 0.3 (.024 ± .012) DIA. 6.0 ± 0.3 (.236 ± .012) R 0.4 (.016) SWITCH TRAVEL 4.3 ± 0.2 (.169 ± .008) R 0.8 (.031) 1.5 ± 0.3 (.059 ± .012) 17.0 ± 0.5 (.669 ± .020) 30 ° FULL CCW How To Order PDB183 - GTR 01 - 504 A2 Model Guitar Pot Designator Configuration • 01 = Knurled Shaft (18 Tooth) / Solder Lugs Derating Curve Rating Power Ratio (%) 19.0 ± 0.5 (.748 ± .020) 9.5 ± 0.3 (.374 ± .012) 26.2 ± 0.5 (1.031 ± .020) • 02 = Plain Shaft / Solder Lugs 100 • 03 = Knurled Shaft (18 Tooth) / PC Pins 80 60 40 33 20 0 • 04 = Plain Shaft/PC Pins 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (°C) Standard Resistance Table Resistance (Ohms) 10,000 25,000 50,000 100,000 250,000 300,000 500,000 1,000,000 Resistance Code 103 253 503 104 254 304 504 105 • 05 = Knurled Shaft (18 Tooth) / Solder Lugs, 8 mm Bushing Diameter 1.4 X 2.4 3 PLCS. (.055 X .094) 3.0 ± 0.3 (.118 ± .012) DIMENSIONS: MM (INCHES) • 11 = Knurled Shaft (24 Tooth) / Solder Lugs • 13 = Knurled Shaft (24 Tooth) / PC Pins • 21 = Knurled Shaft (18 Tooth) / Solder Lugs / Dual Gang • 22 = Plain Shaft / Solder Lugs/ Dual Gang • 31 = Knurled Shaft (18 Tooth) / Solder Lugs, Long Bushing • 32 = Plain Shaft / Solder Lugs / Long Bushing Resistance Code (See table) Resistance Taper (See taper charts) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PDB183-GTR - 17 mm Guitar Potentiometer w/Push-Pull Switch Product Dimensions PDB183-GTR03, PDB183-GTR04 17.0 ± 0.5 (.669 ± .020) 19.0 ± 0.5 (.748 ± .020) 9.5 ± 0.3 (.374 ± .012) 26.2 ± 0.5 (1.031 ± .020) 30 ° FULL CCW 6.0 ± 0.3 (.236 ± .012) 12.5 ± 0.5 (.492 ± .020) (18 TEETH) 3/8” X 0.75 (.030) 1.0 ± 0.3 (.039 ± .012) 12.5 ± 0.5 (.492 ± .020) 6.0 ± 0.3 (.236 ± .012) DIA. 2.5 ± 0.3 (.098 ± .012) 4.0 ± 0.3 (.157 ± .012) 10.5 ± 0.5 (.413 ± .020) 4.2 ± 0.3 (.165 ± .012) 4.1 ± 0.3 4.0 ± 0.3 (.161 ± .012) (.157 ± .012) 4.0 ± 0.3 (.157 ± .012) Circuit 4.0 ± 0.3 (.157 ± .012) (PLAIN SHAFT) Single Gang DIA. 6.0 ± 0.3 (.236 ± .012) 4.0 ± 0.3 (.157 ± .012) 4.0 ± 0.3 (.157 ± .012) 4.2 ± 0.3 (.165 ± .012) 5.0 ± 0.3 (.197 ± .012) 10.5 ± 0.5 (.413 ± .020) 1 Dual Gang 3.5 ± 0.3 (.138 ± .012) 5.0 ± 0.3 (.197 ± .012) 1.2 ± 0.3 (.047 ± .012) 9 PLCS. 0.7 ± 0.3 (.028 ± .012) 5.0 ± 0.3 (.197 ± .012) 2 3 2 R1 1 3 R2 1' 3' 2' Switch PDB183-GTR05 19.0 ± 0.2 (.748 ± .008) 9.5 ± 0.1 (.374 ± .004) NUT 6.0 (.236) M8 X 0.75 (.030) WASHER 8.2 (.323) DIA. (18 TEETH) 1.0 (.039) M8 X 0.75 (.030) 6.0 +0/-0.1 (.236 +0/-.004) DIA. 11.0 (.433) 2.0 (.079) 14.0 DIA. (.157) T= 0.5 (.020) Schematic SHOWN IN PUSH POSITION DIMENSIONS: MM (INCHES) SHAFT SIDE Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PDB183-GTR - 17 mm Guitar Potentiometer w/Push-Pull Switch Product Dimensions PDB183-GTR11, PDB183-GTR13 19.0 ± 0.5 (.748 ± .020) 9.5 ± 0.3 (.374 ± .012) M3/8” - 32 UNF 9.5 ± 0.2 (.374 ± .008) DIA. NUT 6.0 ± 0.3 (.236 ± .012) WASHER (24 TEETH) 1.0 ± 0.3 (.039 ± .012) 0.75 3/8 ” X (.030) DIA. 12.7 ± 0.5 (.472 ± .020) 6.0 ± 0.3 (.236 ± .012) 2.5 ± 0.2 (.098 ± .008) 14.0 ± 0.5 DIA. (.157 ± .020) Product Dimensions PDB183-GTR21, PDB183-GTR22 17.0 ± 0.5 (.669 ± .020) 19.0 ± 0.5 (.748 ± .020) 9.5 ± 0.3 (.374 ± .012) 26.2 ± 0.5 (1.031 ± .020) 30 ° FULL CCW 6.0 ± 0.3 (.236 ± .012) 12.5 ± 0.5 (.492 ± .020) (18 TEETH) 3/8 ” X 0.75 (.030) 1.0 ± 0.3 (.039 ± .012) DIA. 6.0 ± 0.3 (.236 ± .012) 3 PLCS. 1.5 X 2.5 (.059 X .098) (PLAIN SHAFT) 4.0 ± 0.3 (.157 ± .012) 4.0 ± 0.3 (.157 ± .012) 5.0 ± 0.3 (.197 ± .012) 5.0 ± 0.3 (.197 ± .012) DIA. 6.0 ± 0.3 (.236 ± .012) 6.0 ± 0.3 (.236 ± .012) Product Dimensions PDB183-GTR31, PDB183-GTR32 27.5 ± 0.2 (1.083 ± .008 27.5 ± 0.2 (1.083 ± .008 19.0 ± 0.1 (.748 ± .004) 19.0 ± 0.1 (.748 ± .004) 6.0 (.236) (18 TEETH) 3/8” X 0.75 (.030) 1.0 (.039) 3/8” X 0.75 (.030) 6.0 +0/-0.1 (.236 +0/-.004) DIMENSIONS: C 0.5 X 45 ° (.020) 6.0 ± 0.3 (.236 ± .012) DIA. MM (INCHES) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 5.0 ± 0.3 (.197 ± .012) PDB183-GTR - 17 mm Guitar Potentiometer w/Push-Pull Switch Tapers B0 Taper A Series Tapers 100 90 90 80 80 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 100 70 60 50 40 30 20 A3 A): (15 2 ): A A 0 (1 10 0 10 20 30 40 50 70 60 50 40 30 20 10 60 70 80 90 100 0 Rotational Travel (%) 10 20 30 40 50 60 70 80 90 Rotational Travel (%) Typical Part Marking 4.87 (.192) 4.99 (.197) DIMENSIONS: MM (INCHES) REV. 04/14 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 100