74AHC2G08-Q100;
74AHCT2G08-Q100
Dual 2-input AND gate
Rev. 3 — 20 November 2015
Product data sheet
1. General description
The 74AHC2G08-Q100 and 74AHCT2G08-Q100 are high-speed Si-gate CMOS devices.
They provide two 2-input AND gates.
The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V.
The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Symmetrical output impedance
High noise immunity
Low power dissipation
Balanced propagation delays
Multiple package options
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
3. Ordering information
Table 1.
Ordering information
Type number
74AHC2G08DP-Q100
Package
Temperature range
Name
Description
Version
40 C to +125 C
TSSOP8
plastic thin shrink small outline package; 8 leads;
body width 3 mm; lead length 0.5 mm
SOT505-2
40 C to +125 C
VSSOP8
plastic very thin shrink small outline package;
8 leads; body width 2.3 mm
SOT765-1
40 C to +125 C
XSON8
plastic extremely thin small outline package; no
leads; 8 terminals; body 3 2 0.5 mm
SOT996-2
74AHCT2G08DP-Q100
74AHC2G08DC-Q100
74AHCT2G08DC-Q100
74AHC2G08GD-Q100
74AHCT2G08GD-Q100
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
4. Marking
Table 2.
Marking
Type number
Marking code[1]
74AHC2G08DP-Q100
A08
74AHCT2G08DP-Q100
C08
74AHC2G08DC-Q100
A08
74AHCT2G08DC-Q100
C08
74AHC2G08GD-Q100
A08
74AHCT2G08GD-Q100
C08
[1]
The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
$
%
$
%
<
<
PQD
Fig 1.
PQD
Logic symbol
Fig 2.
IEC logic symbol
$
<
%
PQD
Fig 3.
Logic diagram (one gate)
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
2 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
6. Pinning information
6.1 Pinning
$+&*
$+&7*
$
9&&
%
<
<
%
*1'
$
$+&*4
$+&7*4
$
9&&
%
<
<
%
*1'
$
DDM
7UDQVSDUHQWWRSYLHZ
DDD
Fig 4.
Pin configuration SOT505-2 (TSSOP8) and
SOT765-1 (VSSOP8)
Fig 5.
Pin configuration SOT996-2 (XSON8)
6.2 Pin description
Table 3.
Pin description
Symbol
Pin
Description
1A, 2A
1, 5
data input
1B, 2B
2, 6
data input
GND
4
ground (0 V)
1Y, 2Y
7, 3
data output
VCC
8
supply voltage
7. Functional description
Table 4.
Function table[1]
Input
Output
nA
nB
nY
L
L
L
L
H
L
H
L
L
H
H
H
[1]
H = HIGH voltage level; L = LOW voltage level.
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
3 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
8. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
VCC
supply voltage
VI
input voltage
IIK
input clamping current
VI < 0.5 V
[1]
IOK
output clamping current
VO < 0.5 V or VO > VCC + 0.5 V
[1]
IO
output current
0.5 V < VO < VCC + 0.5 V
ICC
IGND
Tstg
storage temperature
[2]
Min
Max
Unit
0.5
+7.0
V
0.5
+7.0
20
-
mA
-
20
mA
-
25
mA
supply current
-
75
mA
ground current
75
-
mA
65
+150
C
-
250
mW
Tamb = 40 C to +125 C
total power dissipation
Ptot
[1]
Conditions
[2]
V
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
For TSSOP8 package: above 55 C the value of Ptot derates linearly with 2.5 mW/K.
For VSSOP8 package: above 110 C the value of Ptot derates linearly with 8 mW/K.
For XSON8 package: above 45 C the value of Ptot derates linearly with 2.4 mW/K.
9. Recommended operating conditions
Table 6.
Recommended operating conditions
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
74AHC2G08-Q100
Min
Typ
74AHCT2G08-Q100
Max
Min
Typ
Unit
Max
VCC
supply voltage
2.0
5.0
5.5
4.5
5.0
5.5
V
VI
input voltage
0
-
5.5
0
-
5.5
V
VO
output voltage
0
-
VCC
0
-
VCC
V
Tamb
ambient temperature
40
+25
+125
40
+25
+125
C
t/V
input transition rise
and fall rate
VCC = 3.3 V 0.3 V
-
-
100
-
-
-
ns/V
VCC = 5.0 V 0.5 V
-
-
20
-
-
20
ns/V
10. Static characteristics
Table 7.
Static characteristics
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
VCC = 2.0 V
1.5
-
-
1.5
-
1.5
-
V
VCC = 3.0 V
2.1
-
-
2.1
-
2.1
-
V
VCC = 5.5 V
3.85
-
-
3.85
-
3.85
-
V
74AHC2G08-Q100
VIH
HIGH-level
input voltage
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
4 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
Table 7.
Static characteristics …continued
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
VIL
VOH
VOL
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
VCC = 2.0 V
-
-
0.5
-
0.5
-
0.5
VCC = 3.0 V
-
-
0.9
-
0.9
-
0.9
V
VCC = 5.5 V
-
-
1.65
-
1.65
-
1.65
V
HIGH-level
VI = VIH or VIL
output voltage
IO = 50 A; VCC = 2.0 V
1.9
2.0
-
1.9
-
1.9
-
V
IO = 50 A; VCC = 3.0 V
2.9
3.0
-
2.9
-
2.9
-
V
IO = 50 A; VCC = 4.5 V
4.4
4.5
-
4.4
-
4.4
-
V
IO = 4.0 mA; VCC = 3.0 V
2.58
-
-
2.48
-
2.40
-
V
IO = 8.0 mA; VCC = 4.5 V
3.94
-
-
3.8
-
3.70
-
V
LOW-level
VI = VIH or VIL
output voltage
IO = 50 A; VCC = 2.0 V
-
0
0.1
-
0.1
-
0.1
V
IO = 50 A; VCC = 3.0 V
-
0
0.1
-
0.1
-
0.1
V
IO = 50 A; VCC = 4.5 V
-
0
0.1
-
0.1
-
0.1
V
IO = 4.0 mA; VCC = 3.0 V
-
-
0.36
-
0.44
-
0.55
V
IO = 8.0 mA; VCC = 4.5 V
-
-
0.36
-
0.44
-
0.55
V
-
-
0.1
-
1.0
-
2.0
A
LOW-level
input voltage
VI = 5.5 V or GND;
VCC = 0 V to 5.5 V
V
II
input leakage
current
ICC
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
1.0
-
10
-
40
A
CI
input
capacitance
-
1.5
10
-
10
-
10
pF
74AHCT2G08-Q100
VIH
HIGH-level
input voltage
VCC = 4.5 V to 5.5 V
2.0
-
-
2.0
-
2.0
-
V
VIL
LOW-level
input voltage
VCC = 4.5 V to 5.5 V
-
-
0.8
-
0.8
-
0.8
V
VOH
HIGH-level
VI = VIH or VIL; VCC = 4.5 V
output voltage
IO = 50 A
4.4
4.5
-
4.4
-
4.4
-
V
3.94
-
-
3.8
-
3.70
-
V
-
0
0.1
-
0.1
-
0.1
V
-
-
0.36
-
0.44
-
0.55
V
-
-
0.1
-
1.0
-
2.0
A
IO = 8.0 mA
VOL
LOW-level
VI = VIH or VIL; VCC = 4.5 V
output voltage
IO = 50 A
IO = 8.0 mA
II
input leakage
current
ICC
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
1.0
-
10
-
40
A
ICC
additional
per input pin; VI = 3.4 V;
supply current other inputs at VCC or GND;
IO = 0 A; VCC = 5.5 V
-
-
1.35
-
1.5
-
1.5
mA
CI
input
capacitance
-
1.5
10
-
10
-
10
pF
74AHC_AHCT2G08_Q100
Product data sheet
VI = 5.5 V or GND;
VCC = 0 V to 5.5 V
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
5 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
11. Dynamic characteristics
Table 8.
Dynamic characteristics
GND = 0 V; for test circuit see Figure 7.
Symbol Parameter
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
-
4.6
8.8
1.0
10.5
1.0
12.0
ns
-
6.5
12.3
1.0
14.0
1.0
16.0
ns
-
3.2
5.9
1.0
7.0
1.0
8.0
ns
-
4.6
7.9
1.0
9.0
1.0
10.5
ns
-
17
-
-
-
-
-
pF
-
3.6
6.2
1.0
7.1
1.0
8.0
ns
-
5.1
7.9
1.0
9.0
1.0
10.5
ns
-
19
-
-
-
-
-
pF
74AHC2G08-Q100
tpd
propagation
delay
nA, nB to nY; see Figure 6
[1]
[2]
VCC = 3.0 V to 3.6 V
CL = 15 pF
CL = 50 pF
[3]
VCC = 4.5 V to 5.5 V
CL = 15 pF
CL = 50 pF
CPD
power
dissipation
capacitance
per buffer;
CL = 50 pF; fi = 1 MHz;
VI = GND to VCC
[4]
nA, nB to nY; see Figure 6
[1]
74AHCT2G08-Q100
tpd
propagation
delay
[3]
VCC = 4.5 V to 5.5 V
CL = 15 pF
CL = 50 pF
CPD
power
dissipation
capacitance
[4]
per buffer;
CL = 50 pF; fi = 1 MHz;
VI = GND to VCC
[1]
tpd is the same as tPLH and tPHL.
[2]
Typical values are measured at VCC = 3.3 V.
[3]
Typical values are measured at VCC = 5.0 V.
[4]
CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD VCC2 fi N + (CL VCC2 fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CL VCC2 fo) = sum of the outputs.
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
6 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
12. Waveforms
9,
90
Q$Q%LQSXW
*1'
W 3+/
W 3/+
92+
Q<RXWSXW
90
92/
PQD
Measurement points are given in Table 9.
Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
Fig 6.
Table 9.
The input (nA and nB) to output (nY) propagation delays
Measurement points
Type
Input
Output
VM
VM
74AHC2G08-Q100
0.5VCC
0.5VCC
74AHCT2G08-Q100
1.5 V
0.5VCC
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
7 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
9,
W:
QHJDWLYH
SXOVH
90
9
9,
WI
WU
WU
WI
SRVLWLYH
SXOVH
9
90
90
90
W:
9&&
9&&
*
9,
92
5/
6
RSHQ
'87
&/
57
DDG
Test data is given in Table 10.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch.
Fig 7.
Table 10.
Test circuit for measuring switching times
Test data
Type
Input
Load
S1 position
VI
tr, tf
CL
RL
tPHL, tPLH
74AHC2G08-Q100
VCC
3 ns
15 pF, 50 pF
1 k
open
74AHCT2G08-Q100
3V
3 ns
15 pF, 50 pF
1 k
open
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
8 of 15
74AHC2G08-Q100; 74AHCT2G08-Q100
NXP Semiconductors
Dual 2-input AND gate
13. Package outline
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPPOHDGOHQJWKPP
'
(
$
627
;
F
+(
\
Y 0 $
=
$
$
$
$
SLQLQGH[
ș
/S
/
H
GHWDLO;
Z 0
ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7
$
PD[
$
$
$
ES
F
'
(
H
+(
/
/S
Y
Z
\
=
ș
PP
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
287/,1(
9(56,21
627
Fig 8.
5()(5(1&(6
,(&
-('(&
-(,7$
(8523($1
352-(&7,21
,668('$7(
Package outline SOT505-2 (TSSOP8)
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
9 of 15
74AHC2G08-Q100; 74AHCT2G08-Q100
NXP Semiconductors
Dual 2-input AND gate
96623SODVWLFYHU\WKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP
'
(
627
$
;
F
\
+(
Y 0 $
=
4
$
$
$
SLQLQGH[
$
ș
/S
H
/
GHWDLO;
Z 0
ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7
$
PD[
$
$
$
ES
F
'
(
H
+(
/
/S
4
Y
Z
\
=
ș
PP
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
287/,1(
9(56,21
627
Fig 9.
5()(5(1&(6
,(&
-('(&
-(,7$
(8523($1
352-(&7,21
,668('$7(
02
Package outline SOT765-1 (VSSOP8)
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
10 of 15
74AHC2G08-Q100; 74AHCT2G08-Q100
NXP Semiconductors
Dual 2-input AND gate
;621SODVWLFH[WUHPHO\WKLQVPDOORXWOLQHSDFNDJHQROHDGV
WHUPLQDOVERG\[[PP
'
%
627
$
(
$
$
GHWDLO;
WHUPLQDO
LQGH[DUHD
H
&
& $ %
&
Y
Z
E
H
/
\ &
\
/
/
;
PP
VFDOH
'LPHQVLRQVPPDUHWKHRULJLQDOGLPHQVLRQV
8QLW
PP
PD[
QRP
PLQ
$
$
E
'
(
H
H
/
/
/
Y
Z
\
\
VRWBSR
2XWOLQH
YHUVLRQ
5HIHUHQFHV
,(&
-('(&
-(,7$
(XURSHDQ
SURMHFWLRQ
,VVXHGDWH
627
Fig 10. Package outline SOT996-2 (XSON8)
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
11 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
14. Abbreviations
Table 11.
Abbreviations
Acronym
Description
CDM
Charged Device Model
CMOS
Complementary Metal-Oxide Semiconductor
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
MIL
Military
MM
Machine Model
TTL
Transistor-Transistor Logic
15. Revision history
Table 12.
Revision history
Document ID
Release date
74AHC_AHCT2G08_Q100 v.3 20151120
Modifications:
•
Data sheet status
Change notice Supersedes
Product data sheet
-
74AHC_AHCT2G08_Q100 v.2
Added type number 74AHC2G08GD-Q100 and 74AHCT2G08GD-Q100
(SOT996-2/XSON8).
74AHC_AHCT2G08_Q100 v.2 20140121
Product data sheet
-
74AHC_AHCT2G08_Q100 v.1
74AHC_AHCT2G08_Q100 v.1 20131113
Product data sheet
-
-
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
12 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
16. Legal information
16.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
16.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
74AHC_AHCT2G08_Q100
Product data sheet
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
13 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74AHC_AHCT2G08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 20 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
14 of 15
NXP Semiconductors
74AHC2G08-Q100; 74AHCT2G08-Q100
Dual 2-input AND gate
18. Contents
1
2
3
4
5
6
6.1
6.2
7
8
9
10
11
12
13
14
15
16
16.1
16.2
16.3
16.4
17
18
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 1
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
Functional description . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Recommended operating conditions. . . . . . . . 4
Static characteristics. . . . . . . . . . . . . . . . . . . . . 4
Dynamic characteristics . . . . . . . . . . . . . . . . . . 5
Waveforms and test circuit . . . . . . . . . . . . . . . . 6
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP Semiconductors N.V. 2015.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 20 November 2015
Document identifier: 74AHC_AHCT2G08_Q100