1 2 4 3 5 7 6 8 REVISIONS ZONE REV 2X .051 1.29 DATE RELEASE PER ECO 001203 MINOR CHANGES MINOR CHANGES APPROVED 5/15/2013 6/5/2013 8/5/2013 D 1.44 36.50 1.339 34.00 1.181 30.00 1.102 28.00 1.024 26.00 .945 24.00 .866 22.00 .787 20.00 .709 18.00 .630 16.00 .551 14.00 .472 12.00 .394 10.00 .315 8.00 .193 4.90 2X MAX .182 PAD DIA FOR 2-56 SCREWS 0 0.00 .10 2.50 D .236 6.00 1 2 3 DESCRIPTION .094 2.39 .10 2.50 .062 1.57 .059 1.50 0 0.00 .022 0.55 .961 24.40 C C .764 19.40 .823 20.90 .175 4.45 .234 5.95 .86 21.90 1 4X B PIN 1 1.535 39.00 .100 2.54 .177 4.50 .323 8.20 A APPROVALS LTC CONFIDENTIAL - FOR CUSTOMER USE ONLY CUSTOMER NOTICE DRN BY: LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. 1 PERFORATED BREAKAWAY TABS (MOUSE-BITES) MAY EXTEND 1MM BEYOND OUTLINE. 2 APPD: APPD: CHECKER APPD. DATE: 6/5/13 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM] TOLERANCES 2 PLC 3 PLC ANGLES ± .05 MATERIAL: APPROVED PROGRAM MGR: 3 4 5 6 PROD REL DATE: ± .005 ± 0°30' 30695 HUNTWOOD AVE, HAYWARD, CA 94544 TITLE PCA OUTLINE DRAWING, LTP5900 REFERENCE LTC SPEC 05-08-10001 (A) SIZE PROJ MGR: THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND IS SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS. 1 CHK: john STENCIL design PROJECTION DWG NO. D FINISH: SCALE ENGRG MGR: 7 REV. 3 061-0183 1/1 DO NOT SCALE DWG 8 SHEET 1 OF 1 A