ICTE-5 THRU ICTE-45C TRANSIENT VOLTAGE SUPPRESSORS High-reliability discrete products and engineering services since 1977 FEATURES: Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number Available Non-RoHS (standard) or RoHS compliant (add PBF suffix) MAXIMUM RATINGS 5.0 to 450 Volts 1500 Watt Peak Power 5.0 Watt Steady State Symbol Value Units Peak Power Dissipation @ TA = 25°C, TP = 1ms (1) Rating PPK 1.5 kWatts Steady State Power Dissipation @ TL = 75°C Lead Lengths .375”, (9.5 mm) (Note 2) PD 5.0 Watts tclamping < 1 x 10-12 Sec lFS 200 Amps TJ, TSTG -65 to +175 °C Clamping Time 0 Volts to VBR Forward Surge Rating 1/120 sec (Uni-polar Only) Operating and Storage Temperature Range UNI-POLAR CHARACTERISTICS @ 25°C Reverse Stand-off Voltage Maximum Reverse Leakage @ VR lR μA Minimum Breakdown Voltage @ 1.0 mA VBR Volts Maximum Clamping Voltage @ lPP = 1 A VC Volts Maximum Clamping Voltage @ lPP = 10 A VC Volts Maximum Peak Pulse Current 5.0 300 6.0 7.1 7.5 160 ICTE-8 8.0 25 9.4 11.3 11.5 100 ICTE-10 10.0 2 11.7 13.7 14.1 90 ICTE-12 12.0 2 14.1 16.1 16.5 70 ICTE-15 15.0 2 17.6 20.1 20.6 60 ICTE-18 18.0 2 21.2 24.2 25.2 50 ICTE-22 22.0 2 25.9 29.8 32.0 40 ICTE-36 36.0 2 42.4 50.6 54.3 23 ICTE-45 45.0 2 52.9 63.3 70.0 19 Maximum Reverse Leakage @ VR lR μA Minimum Breakdown Voltage @ 1.0 mA VBR Volts Maximum Clamping Voltage @ lPP = 1 A VC Volts Maximum Clamping Voltage @ lPP = 10 A VC Volts Maximum Peak Pulse Current Part Number (Note 3) VR Volts ICTE-5 (Fig. 2) lPP Amps BI-POLAR CHARACTERISTICS @ 25°C Part Number Reverse Stand-off Voltage (Note 3) VR Volts (Fig. 2) lPP Amps ICTE-8C 8.0 25 9.4 11.4 11.6 100 ICTE-10C 10.0 2 11.7 14.1 14.5 90 Rev. 20080829 ICTE-5 THRU ICTE-45C High-reliability discrete products and engineering services since 1977 TRANSIENT VOLTAGE SUPPRESSORS ICTE-12C 12.0 2 14.1 16.7 17.1 70 ICTE-15C 15.0 2 17.6 20.8 21.4 60 ICTE-18C 18.0 2 21.2 24.8 25.5 50 ICTE-22C 22.0 2 25.9 30.8 32.0 40 ICTE-36C 36.0 2 42.4 50.6 54.3 23 ICTE-45C 45.0 2 52.9 63.3 70.0 19 Clamping Factor: 1.33 @ Full rated power 1.20 @ 50% rated power Clamping Factor is the ratio of VC to VBR Notes to Characteristics 1. Non-repetitive current pulse, per Fig. 3, and derated above TA = 25°C per Fig. 2 2. Mounted on copper leaf area of 0.79 sq. in. (20 sq mm) 3. VBR measured after lT applied for 300 μs (lT = Square Wave Pulse or equivalent) 4. ICTE-5 is not available as bipolar MECHANICAL CHARACTERISTICS Case DO-201 Marking Alpha-numeric Polarity Cathode band Rev. 20080829 High-reliability discrete products and engineering services since 1977 ICTE-5 THRU ICTE-45C TRANSIENT VOLTAGE SUPPRESSORS Rev. 20080829