2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. WIRE RANGE PANDUIT PART # * F73-5 * F73-7 * F74-5 * F74-7 2 AWG [mm ] 24 [0,25] 24-22 [0,34] + F75-6 B + F75-8 WIRE STRIP LENGTH +1/32 -0 [+0,8 -0] 7/32 [5,0] 9/32 [7,0] 7/32 [5,0] 9/32 [7,0] DIMENSIONS 5/16 [8,0] INSTALLATION PANDUIT CLASS TOOLS PART # L B, K, M B, K, M B, K, M 0.04 [1,0] [1,0] 0.05 [1,2] 0.05 [1,2] 0.05 [1,2] 0.05 [1,2] 0.06 [1,4] 0.06 [1,4] 0.06 [1,4] 0.06 [1,4] 0.06 [1,4] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 13/32 [10,0] F76-12 15/32 [12,0] F77-6 1/4 [6,0] F77-7 9/32 [7,0] - F77-8 [1,00] 5/16 [8,0] F77-10 13/32 [10,0] F77-12 15/32 [12,0] F78-7 9/32 [7,0] F78-8 5/16 [8,0] F78-10 13/32 [10,0] F78-12 16 F78-15 [1,50] 15/32 [12,0] 0.47 [12,0] 0.24 [6,0] 0.28 [7,0] 23/32 [18,0] F78-20 25/32 [20,0] 0.31 [8,0] 0.39 [10,0] 0.47 [12,0] 0.28 [7,0] 0.31 [8,0] 0.39 [10,0] B, K, M 19/32 [15,0] F78-18 [8,0] 0.39 [10,0] B, K, M 0.04 [1,1] 0.05 [1,2] 0.05 [1,2] 0.05 [1,3] 0.05 [1,3] 0.05 [1,3] 0.06 [1,5] 0.06 [1,5] 0.06 [1,5] 0.06 [1,5] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.08 0.04 0.31 B, K, M [1,1] [1,0] 0.31 0.24 [6,0] 0.04 0.03 [0,8] 0.03 [0,8] 0.04 [0,9] 0.04 [0,9] 0.04 [8,0] 0.39 1/4 [6,0] F76-10 (REF.) [7,0] 0.24 [6,0] F76-6 5/16 [8,0] (REF.) [15,0] 0.28 [10,0] [0,75] OD-1 [7,0] 0.20 13/32 [10,0] 18 ID-1 0.20 [15,0] 0.28 + F75-10 F76-8 WIRE RANGE WIRE 1/4 [6,0] 22-20 [0,50] in. [mm] 0.47 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [20,0] [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] OD-2 AWG [mm 0.07 [1,7] 0.07 [1,7] 0.07 [1,8] 0.07 [1,8] 0.08 [2,1] 0.08 [2,1] 0.08 [2,1] 0.09 [2,31] 0.09 [2,31] 0.09 [2,31] 0.09 [2,31] 0.10 CT-1002 CT-1123 9/32 [7,0] F80-8 5/16 [8,0] F80-10 13/32 [10,0] 14 19/32 [15,0] F80-18 23/32 [18,0] F80-20 25/32 [20,0] F81-9 11/32 [8,0] F81-10 13/32 [10,0] 12 F81-15 0.10 CT-1002 CT-1003 CT-1123 0.10 [2,5] 0.10 [2,5] 0.10 0.11 [2,8] 0.11 [2,8] 0.11 [2,8] 0.11 [2,8] 0.11 0.11 [2,8] 0.11 [2,8] 15/32 [12,0] 19/32 [15,0] 23/32 [18,0] F81-20 25/32 [20,0] F82-10 13/32 [10,0] F82-12 15/32 [12,0] 10 [6,00] 19/32 [15,0] F82-18 23/32 [18,0] F82-20 25/32 [20,0] F83-12 15/32 [12,0] F83-15 19/32 [15,0] F83-18 [2,8] [4,00] F81-18 F82-15 [2,5] [2,50] 15/32 [12,0] F80-15 F81-12 [2,5] ] +1/32 -0 [+0,8 -0] F80-7 F80-12 [2,5] 2 WIRE STRIP LENGTH 8 DIMENSIONS 25/32 [20,0] F83-25 31/32 [25,0] INSTALLATION CLASS TOOLS L OD-2 0.10 0.13 [2,5] [3,4] 0.47 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [10,0] G, I, K, M (REF.) 0.09 [20,0] 0.35 [9,0] 0.39 G, K, M (REF.) [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] [10,0] K, M OD-1 0.28 0.31 G, ID-1 [7,0] [8,0] 0.39 [10,0] 23/32 [18,0] G, H, I, K, M F83-20 in. [mm] WIRE 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.11 0.13 0.16 [2,8] [3,2] [4,0] 0.11 0.13 0.16 [2,8] [3,2] [4,0] 0.47 0.11 0.13 0.16 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [2,8] [3,2] [4,0] 0.11 0.13 0.16 [20,0] 0.39 [2,8] [3,2] [4,0] 0.14 0.15 0.19 [10,0] [3,5] [3,9] [4,7] 0.11 0.13 0.16 [2,8] [3,2] [4,0] 0.11 0.13 0.16 [2,8] [3,2] [4,0] 0.47 0.14 0.15 0.19 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [3,5] [3,9] [4,7] 0.14 0.15 0.19 [3,5] [3,9] [4,7] 0.14 0.15 0.19 [3,5] [3,9] [4,7] 0.14 0.15 0.19 [20,0] 0.47 [3,5] [3,9] [4,7] 0.18 0.19 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [4,5] [4,9] [20,0] 0.98 [25,0] 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.18 0.19 [4,5] [4,9] 0.18 0.19 [4,5] [4,9] 0.18 0.19 [4,5] [4,9] 0.18 0.19 [4,5] [4,9] B CT-1002 CT-1003 CT-1123 CT-1002 ++CT-1003 CT-1123 ++CT-1003 ++CT-1004 CT-1104 CT-1123 * NOT UL LISTED, UL486 SCOPE IS 20 - 1/0 AWG ONLY + UL LISTED WITH 20 AWG ONLY ++ TOOL/PART IS NOT A UL LISTED COMBINATION ** A DIES USED WITH CT-3001 OR CT-3001/E TOOL LISTED E472545 0D-1 REF. L ID-1 REF. OD-2 A CERTIFIED LR31212 TITLE 302 WAS 221 FERRULES - NO SLEEVE SHEET 1 OF 2 A41670 17 10.15.15 JHNU TMR RGB REVISED NOTE 1B: 16 6.05.15 TMR TMR RGB ADDED WIRE CLASSES TO TABLE AND REVISED UL TOOL INFO CUSTOMER DRAWING A41670 ITEM REVISION NAME NOTES: 15 1. USED FOR: 14 03.09.15 JHNU TMR RGB F76 WAS 20AWG, F77 WAS 18AWG N41670BA/17 A41670 DATASET FILE NAME A. UL LISTED WITH STRANDED COPPER WIRE 20 - 1/0 AWG ONLY B. 302 F [150 C] MAX. OPERATING TEMPERATURE 2. MATERIAL: A. STAMPING: COPPER, TIN PLATED 3. SEE www.panduit.com FOR PACKAGE QUANTITIES 4. DIMENSIONS IN BRACKETS ARE METRIC EQUIVALENT 5. FOR TOLERANCING REFER TO DIN 46228 PART 1 03.04.15 TMR TMR RGB F94 AWG SIZE WAS 400 A41670 N41670BA_DC/17 A41670 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] MATERIAL: 13 12.05.14 JHNU TMR RGB 12 04.15.13 BDK TMR RTFI 11 01.19.13 BDK BCT VMB ADDED cULus LOGO REVISED NOTE 1A ADDED DIE REFERENCES AND NOTE. F91 METRIC WIRE RANGE WAS [250]. WIRE STRIP LENGTH FOR F91-40, F93-40, F94-40 WAS 1 3/4 [44,0] AND DIM L WAS 1.57 [44,0] A41670 .X .XXX .XX ANGLES SEE NOTES DRAWING NUMBER: REVISED AND REDRAWN; ADDED CSA LOGO THIRD ANGLE PROJECTION A41670 DRAWN BY REV 2 DATE BY CHK APR DESCRIPTION ECN JKD 1 DATE CHK 2/10/99 SKB A41670 SIZE SCALE N.T.S. SHT 1 OF 2 B 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. WIRE RANGE PANDUIT PART # AWG [mm ] +1/32 -0 [+0,8 -0] F84-12 15/32 [12,0] F84-15 19/32 [15,0] F84-18 23/32 [18,0] F84-20 B 2 WIRE STRIP LENGTH 6 [16,0] 25/32 [20,0] F84-25 31/32 [25,0] F84-32 1-1/4 [32,0] F85-12 15/32 [12,0] F85-15 19/32 [15,0] F85-18 4 [25] 31/32 [25,0] F85-32 1 1/4 [32,0] F86-18 23/32 [18,0] F86-25 2 F86-32 [35] 25/32 [20,0] 31/32 [25,0] in. [mm] INSTALLATION PANDUIT CLASS TOOLS PART # L 0.47 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 G, H, I, K, M [20,0] 0.98 [25,0] 1.26 [32,0] 0.47 [12,0] 0.59 [15,0] 0.71 [18,0] 0.98 [25,0] 1.26 [32,0] 0.71 [18,0] 0.79 G, H, I, K, M [20,0] 0.98 [25,0] 1.26 1 1/4 [32,0] [32,0] ID-1 OD-1 (REF.) (REF.) 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.23 [5,8] 0.29 [7,3] 0.29 [7,3] 0.29 [7,3] 0.29 [7,3] 0.29 [7,3] 0.33 [8,3] 0.33 [8,3] 0.33 [8,3] 0.33 [8,3] 0.24 [6,2] 0.24 [6,2] 0.24 [6,2] 0.24 [6,2] 0.24 [6,2] 0.24 [6,2] 0.30 [7,7] 0.30 [7,7] 0.30 [7,7] 0.30 [7,7] 0.30 [7,7] 0.34 [8,7] 0.34 [8,7] 0.34 [8,7] 0.34 [8,7] OD-2 0.30 [7,5] 0.30 [7,5] 0.30 [7,5] 0.30 [7,5] 0.30 [7,5] 0.30 [7,5] 0.37 [9,5] 0.37 [9,5] 0.37 [9,5] 0.37 [9,5] 0.37 [9,5] 0.43 AWG F87-22 ++CT-1004 CT-1104 0.43 [11,0] 0.43 [11,0] F87-25 1-1/0 [50] 7/8 [22,0] 31/32 [25,0] 31/32 [25,0] [70] [95] * F90-32 4/0-250 [120] * F92-32 * F92-38 300 [150] * F93-32 * F93-40 * F94-40 1 3/16 [30,0] 350 500 [185] 1 1/4 [32,0] 1 19/32 [40,0] 1 1/4 [32,0] 1 1/2 [38,0] 1 1/4 [32,0] 1 19/32 [40,0] [240] 1 19/32 [40,0] [22,0] 0.98 [25,0] 1.26 H, DLO, I, K, M H, DLO, I, K, M [32,0] 0.98 [25,0] 1.26 0.49 [32,0] 0.98 [25,0] [12,5] 0.57 [14,5] 0.57 [14,5] 0.57 [14,5] 0.65 [16,5] 0.65 [16,5] 1.18 [30,0] 1.26 [32,0] 1.57 [40.0] H, DLO, I, K, M 1.26 0.73 [32,0] [18,5] 1.50 0.73 [18,5] 0.79 [20,0] 0.79 [20,0] 0.90 [22,8] [38,0] 1.26 H, DLO, I, K, M [32,0] 1.57 [40.0] H, DLO, I, K, M (REF.) 1.57 [40.0] OD-2 0.43 0.51 [13,0] 0.51 [13,0] 0.51 [13,0] 0.51 [13,0] 0.59 [15,0] 0.59 [15,0] 0.67 [17,0] 0.67 [17,0] 0.67 [17,0] 0.75 [19.0] 0.75 [19.0] 0.83 [21.0] 0.83 [21.0] 0.93 [10,9] 0.43 [10,9] 0.43 [10,9] 0.43 0.49 [32,0] H, DLO, I, K, M OD-1 [12,5] 1.26 1 1/4 [32,0] * F91-32 * F91-40 1 1/4 [32,0] G, H, DLO, I, K, M ID-1 (REF.) 0.41 [10,3] 0.41 [10,3] 0.41 [10,3] 0.41 [10,3] 0.71 [18,0] 0.87 31/32 [25,0] 3/0 INSTALLATION TOOLS/DIES L * F89-25 * F90-30 CT-1005 +1/32 -0 [+0,8 -0] 1 1/4 [32,0] 2/0 in. [mm] CLASS 23/32 [18,0] * F90-25 CT-1005 DIMENSIONS WIRE F87-32 * F89-32 0.43 [11,0] 2 [mm ] F87-18 [11,0] * NOT UL LISTED, UL486F SCOPE IS 20 - 1/0 AWG ONLY + UL LISTED WITH 20 AWG ONLY ++ TOOL/PART IS NOT A UL LISTED COMBINATION ** WIRE STRIP LENGTH WIRE RANGE WIRE 23/32 [18,0] G, H, I, K, M F85-25 F86-20 DIMENSIONS [10,9] 0.52 [13,3] 0.52 [13,3] 0.60 [15,3] 0.60 [15,3] 0.60 [15,3] 0.69 [16,5] 0.69 [16,5] 0.77 [19,5] 0.77 [19,5] 0.83 [21,2] 0.83 [21,2] [23,5] 0.93 [23,5] 0.94 [24,0] [25,8] ** ** CD-2001-F89 ** CD-2001-F90 ** 1.02 CT-1006 CD-2001-F87 CD-2001-F91 ** CD-2001-F92 ** CD-2001-F93 ** B CD-2001-F94 DIES USED WITH CT-3001 OR CT-3001/E TOOL 0D-1 REF. L ID-1 REF. OD-2 A A TITLE FERRULES - NO SLEEVE SHEET 2 OF 2 NOTES: 1. USED FOR: A. UL LISTED WITH STRANDED COPPER WIRE 20 - 1/0 AWG ONLY B. 302 F [150 C] MAX. OPERATING TEMPERATURE CUSTOMER DRAWING ITEM REVISION NAME N41670BA/17 2. MATERIAL: A. STAMPING: COPPER, TIN PLATED DATASET FILE NAME 3. SEE www.panduit.com FOR PACKAGE QUANTITIES 4. DIMENSIONS IN BRACKETS ARE METRIC EQUIVALENT 5. FOR TOLERANCING REFER TO DIN 46228 PART 1 LISTED E472545 N41670BA_DC/17 CERTIFIED LR31212 MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X .XXX .XX ANGLES SEE NOTES DRAWING NUMBER: THIRD ANGLE PROJECTION DRAWN BY JKD 2 1 DATE CHK 2/10/99 SKB A41670 SIZE SCALE N.T.S. SHT 2 OF 2 B