Features ■ ■ ■ ■ ■ ■ Low output ripple 10 amp output current 92 % efficiency Low 0.5 ˝ profile Power good Remote sense ■ ■ ■ ■ ■ ■ Adjustable Vout Short-circuit protection with auto-restart Fast transient response High-temperature operation Remote enable Output precharge capability SLN10A-5SA Series – Power Module Standard Options General Information The SLN10A adds a new meaning to low cost DC-DC converters. This non-isolated SIP uses a 5 V input to provide 10 Amps of output current at voltages ranging from 0.8 V to 2.5 V. The SLN10A output is adjustable by the user to provide any voltage within its range. Its extra low 0.8 V output will power even the latest in ASICs, microprocessors, and DSPs. The SLN10A has an industry standard pinout, is 2 inches long, and only 0.5 inches high. Its total footprint is a space saving 0.75 in2. Features include Enable/Disable, output voltage trim, remote sense, short circuit protection with auto-restart, fast transient response, and high temperature operation. The SLN10A is one of the most cost-effective DC-DC converters available. Output Voltage (V) Output Current (A) Ripple Max. (mV pp) Efficiency Typ. (%) 5 4.5 to 5.5 0.8 to 3.5 10 40 90 SLN10A-5SA Product Dimensions 50.8 (2.0) 7.6 (0.3) E T E L O S B O Voltage .....................................4.5 VDC Min. 5 VDC Nom. 5.5 VDC Max. Current .......................................10 A Nom. Remote Enable High = Disable.....................2.4 VDC Min. Low = Enable ..................0.4 VDC max. (open = enable) Enable/Disable Current ..........250 µA Nom. Output Specifications Input Voltage (V) Current ............................................0 to 10 A Current Limit .................................11 to 18 A Voltage Setpoint Accuracy ................................±1 %Vnom (nominal) ±2 %Vnom (max.) optional ................±0.5 %Vnom (nominal) ±1 %Vnom (max.) Line Regulation ......................±0.1 %Vnom Load Regulation ....................±0.2 % Vnom Ripple.............................................20 mV pp Dynamic Response 50 to 100 % load ..................40 mV Nom. 20 µs Nom. 100 to 50 % load ..................40 mV Nom. 20 µs Nom. Temperature Regulation ...............................±0.02 %Vout/°C Max. General Specifications MBTF .................................2,000 kHrs Nom. (80 % load, 25 °C) Operating Temperature........-40 to +100 °C Storage Temperature...........-55 to +125 °C Switching Frequency............300 kHz Nom. 1 2 3 4 5 0.3 (0.012) TYP. PIN THICKNESS 1.8 (0.07) 2.54 (0.100) 1.27 (0.050) 12.4 (0.49) 6 7 8 9 10 5.08 (0.2) 3.43 ± 0.38 (0.135 ± .015) 35.6 (1.400) PIN DESCRIPTIONS: 1 – Vout 5 – Gnd 2 – Vout 6 – Gnd 3 – Sense 7 – Vin 4 – Vout 8 – Vin 9 – Trim 10 – Enable 0.5 (0.020) TYP. PIN WIDTH DIMENSIONS = MILLIMETERS (INCHES) TOLERANCES = (.xx) = ± .25 (.01) (.xxx) = ± .13 (.005) Product Schematic Vin (3.3 V) + + + 7 - Vin 1 - Vout 8 - Vin 2 - Vout 4 - Vout 100 µf 100 µf + Vout + 100 µf 100 µf 3 - REMOTE SENSE 100 µf 9 - TRIM 10 - ENABLE 1. Use low ESR capacitors for VIN and VOUT bypassing. 2. Part is enabled when ENABLE (10) is left floating or grounded. 3. Apply 2.4 to 5 VDC to ENABLE (10) to disable (shut down) the part. 4. Use the table above to determine an RTRIM resistor for the desired voltage. 5. To get an intermediate voltage between 0.800 V and 3.500 V, use the equation at right. VOUT 3.5 RTRIM (kΩ) 0.182 3.0 5.62 2.5 14.3 2.0 30.1 1.5 68.1 1.0 301 0.8 open Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 5 - GND 6 - GND Input Specifications Nominal Input (V) Rtrim SEE TABLE ( Rtrim = R6 / (Vout / VFB) -1) - R4 WHERE R4 = 23.7K Ohms R6 = 80.6K Ohms VFB = 0.800 VDC SLN10A-5SA Series – Power Module Efficiency Curve Temperature Derating 12 96 94 EFFICIENCY (%) OUTPUT CURRENT (A) 2.5 V 92 90 1.8 V 88 86 1.2 V 84 200 LFM 10 400 LFM 100 LFM 8 0 LFM 6 4 2 82 80 E T E L O S B O 0 0 2 4 6 8 10 0 OUTPUT CURRENT (A) 20 40 60 80 100 AMBIENT TEMPERATURE (°C) How to Order S LN 10A - 5 S A Configuration Internal Identifier Current/Power (Amps) Input Voltage (Volts) Outputs S = Single Output Voltage (V) A = Adjustable Reliable Electronic Solutions Asia-Pacific: TEL +886- (0)2 25624117 • FAX +886- (0)2 25624116 Europe: TEL +41-41 768 5555 • FAX +41-41 768 5510 The Americas: TEL +1-951 781-5500 • FAX +1-951 781-5700 www.bourns.com REV. 12/05 COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A., 2/05