HEW (HELICAL EDGE WOUND) HIGH CURRENT INDUCTOR HWI4427H SERIES • High Current Inductors (inductance range from 1.4μH to 45.9μH) in a compact size package (44.5mm x 40mm x 27mm) • Flat wire coil minimizes losses at high frequency • Horizontal mount, low profile package (vertical mount version also available) • Operating Temperature -40ºC to +150ºC • RoHS Compliant Product • Custom Design Available ELECTRICAL PARAMETERS @ 25°C Part Number INDUCTANCE (μH) ±15% Irms (Amp) Typical DCR (mΩ) Max 20ºC Rise 40ºC Rise Isat (Amp) Typical Dimensions (mm) 10% Drop 30% Drop C D HWI4427-038A-450H 45.9 25 38 4.2 25 48 1.50 8.00 HWI4427-038A-300H 30.6 25 38 4.2 46 82 1.50 8.00 HWI4427-044A-290H 29.4 29 44 3.0 31 61 1.80 8.00 HWI4427-044A-190H 19.6 29 44 3.0 58 102 1.80 8.00 HWI4427-068A-130H 13.1 45 68 1.3 47 91 2.50 8.50 HWI4427-068A-8R7H 8.7 45 68 1.3 87 154 2.50 8.50 HWI4427-068A-5R6H 5.6 45 68 1.3 174 342 2.50 8.50 HWI4427-092A-7R3H 7.3 61 92 0.7 63 122 3.00 8.50 HWI4427-092A-4R9H 4.9 61 92 0.7 116 205 3.00 8.50 HWI4427-122A-3R3H 3.3 80 122 0.4 95 183 3.50 8.50 HWI4427-122A-2R2H 2.2 80 122 0.4 174 308 3.50 8.50 HWI4427-122A-1R4H 1.4 80 122 0.4 349 685 3.50 8.50 Note: 1. Inductance measured at 10KHz, 1Vrms 2. Isat is DC current at which the inductance drops the specified amount from its original value without bias. 3. Irms is the DC current that causes the specified temperature rise of the winding from 25°C ambient for the inductor. Revised 03/17/2016 Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] HEW (HELICAL EDGE WOUND) HIGH CURRENT INDUCTOR HWI4427H SERIES DIMENSIONS (mm / [inch]) Recommended PCB Layout 44.5 Max [1.75] 44.5 Max [1.75] 40.0 Max [1.58] MPS HWI4427-XXXA-XXXH Date Code 35.0 Ref CL [1.38] 40.0 Max [1.58] 20.00 Ref [0.787] C Ref D Ref CL 25.00 Typ [0.984] CL 27.0 Max [1.06] 25.00 Typ [0.984] 6.35 Ref [0.250] 20.00 Typ [0.787] Revised 03/17/2016 Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected]