Datasheet

Teccor® brand Thyristors
Standard Bidirectional SIDACs
Kxxx1GL Series
RoHS
Description
The Multipulse™ SIDAC is a voltage switch used in MetalHalide lamp ignition circuits, as well as High Pressure
Sodium lamp ignition circuits for outdoor street and area
lighting. This robust solid-state switch is designed to handle
lamp igniter applications requiring operation at ambient
temperatures up to 90°C where igniter circuit components
can raise SIDAC junction temperature up to 125°C, especially
when the lamp element is removed or ruptured. Its excellent
commutation time (tCOMM) makes this robust product best
suited for producing multiple pulses in each half cycle of
50/60 Hz line voltage. The Multipulse™ SIDAC is offered in a
DO-15 axial leaded package.
Kxxx1GL SIDAC has a repetitive off-state blocking voltage
(VDRM) of 180V to 270V minimum depending actual device
type. Blocking capability is ensured by glass passivated
junctions for best reliability. The package is epoxy
encapsulated with tin plated copper alloy leads.
Schematic Symbol
Features
• AC circuit oriented
• RoHS Compliant
• Triggering Voltage of 200
to 380V
Applications
Typical application circuit presented in Figure 10 of this data
sheet (Typical Metal Halide Ignitor Circuit).
Electrical Specifications
Symbol
VT
Parameters
Test Conditions
On-state Voltage
IT=1A
ITRM
Peak Non-Repetitive Surge Current
VBO
Breakover/Trigger Voltage
VDRM
Repetitive Peak Off-State Voltage
IT(RMS)
On-State RMS Current, TJ < 125ºC
IH
Dynamic Holding Current, R=100 Ω
RS
(VBO – VS)
Switching Resistance, RS= ________
(IS – IBO)
tCOMM
IBO
Commutation Time TJ < 125ºC
Breakover Current
Min
TA=25 °C
Pulse Wave = 10μs,
Sine Wave, f=120Hz
K2201GL
K2401GL
K2501GL
K3601GL
K2201GL
K2401GL
K2501GL
K3601GL
50/60Hz
Sine Wave
50/60Hz
Sine Wave
200
220
240
348
180
190
200
270
50/60Hz
Sine Wave
100
See test circuit and
waveform in Figure 9
50/60Hz
Sine Wave
60Hz
50Hz
Max
Unit
3
V
50
A
230
250
265
380
V
V
1
A
30 TYP
mA
Ω
100
μsec
10
uA
ITSM
Non-repetitive 1 cycle On-State peak value
di/dt
Critical Rate of Rise of On-State Current
20.0
16.7
150
dv/dt
Critical Rate of Rise of Off-State Voltage
1500
V/μsec
+125
°C
TS
Storage Temperature Range
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/25/16
-40
A
A/μsec
Teccor® brand Thyristors
Standard Unidirectional SIDACs
Figure 2: Maximum Allowable Lead/Tab Temperature
vs. On-State Current
Figure 1: Characteristics
+I
130
IT
120
IH
Maximum Allowable Lead
Temperature (°C)
RS
IS
IDRM
-V
RS
=
IBO
+V
VT
(VBO - VS)
VS
VBO
110
100
90
80
70
VDRM
(IS - IBO)
60
50
0
1.0
1.5
2.0
RMS On-State Current (Amps)
-I
Figure 3: Power Dissipation (Typical)
vs. On-State Current
Figure 4: VBO Change
vs. Junction Temperature
4
3.5
2
Normalized Percentage of V
Change (%)
4.0
Average PD (Watts)
3.0
2.5
2.0
1.5
K2x01GL
0
-2
-4
K3x01GL
-6
1.0
-8
0.5
-10
0.0
0.0
0.5
1.0
-40
1.5
-25
0
Figure 5: Pulse On-State
Current Rating
Repetitive Peak On-State
Current (ITRM)-Amps
ITM
1/f
120 Hz
145
100
TJ=125˚C
60 Hz
1KHz
5KHz
10
1
125
105
10
100
Pulse Base Width (tO)-µs
CURRENT WAVEFORM: Sinusoidal - 60Hz
LOAD: Resistive or Inductive
FREE AIR RATING
120
tO
f = 5Hz
1
85
65
140
di/dt limit
100
45
Figure 6: Maximum Allowable Ambient Temperature
vs. On-State Current
Maximum Allowable Ambient Temperature
(TA) - °C
1000
25
Junction Temperature (°C)
RMS On-State Current (Amps)
1000
80
60
40
25
20
0.0
0.2
0.4
0.6
0.8
1.0
RMS On-State Current [IT(RMS)] - Amps
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/25/16
Teccor® brand Thyristors
Standard Bidirectional SIDACs
Figure 7: Peak Surge Current vs Surge Current Duration
Peak Surge (Non-repetitive)
On-state Current [ITSM] – Amps
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: IT Maximum Rated Value at
Specified Junction Temperature
40
Notes:
1. Blocking capability may be lost during
and immediately following surge
current interval.
2. Overload may not be repeated until
junction temperature has returned
to steady-state rated value.
20
10
0
0
10
100
1000
Surge Current Duration – Full Cycles
Figure 8: Typical On-State Voltage vs On-State Current
Figure 9: Multipulse™ SIDAC tCOMM , Commutation Time
1Mohm
30uH
10
iSIDAC
320VDC
(nominal)
0.2uF
L6008V6
DUT
300ohm
Instantaneous On-State Current iT (A)
6V, 500us
SIDAC Commutation Time Test Circuit
125°C
25°C
iSIDAC
25A
1
time
~10μs
commutation time, tcomm
SIDAC Current Response Waveform
0.1
1.2
1.6
2
2.4
2.8
3.2
3.6
Additional Information
Instantaneous On-State Voltage vT (V)
Datasheet
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/25/16
Resources
Samples
Teccor® brand Thyristors
Standard Unidirectional SIDACs
Figure 10: Typical Metal Halide Ignitor Circuit
H.V.
Step-up
Transformer
Ballast
0.1- 0.15 µF
Kxxx1GL
220 V / 240 V
50 / 60 Hz
Metal
Halide
Lamp
5 - 20µH
0.22- 0.33µF
8.2K-10K
5W
Note: With proper component selection, this circuit will produce three pulses for ignition of
metal halide lamp that requires a minimum of three pulses at 5kV magnitude and >1uSec
duration each at a minimum repetition rate of 3.3kHz.
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Peak Temperature (TP)
+0/-5
tP
TP
Temperature
Reflow Condition
Ramp-do
Ramp-down
tS
time to peak temperature
Time
°C
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/25/16
Teccor® brand Thyristors
Standard Bidirectional SIDACs
Physical Specifications
Terminal Finish
Body Material
Lead Material
Reliability/Environmental Tests
Test
100% Matte Tin Plated
UL recognized epoxy meeting flammability
classification 94V-0
Specifications and Conditions
High Temperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition
A Rated VDRM (VAC-peak), 125°C, 1008
hours
Temperature Cycling
MIL-STD-750: Method 1051, 100 cycles;
-40°C to 150°C, 15-minute dwell time
Temperature /
Humidity
EIA/JEDEC: JESD22-A101
1008 hours; 160V - DC: 85°C;
85% relative humidity
High Temp Storage
MIL-STD-750: Method 1031
150°C, 1008 hours
Low-Temp Storage
-40°C, 1008 hours
Thermal Shock
MIL-STD-750: Method 1056
10 cycles; 0°C to 100°C; 5-minute dwelltime at each temperature; 10-sec (max)
transfer time between temperature
Copper Alloy
Package
Weight / unit (mg)
385
DO-15
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long
way toward extending the operating life of the Thyristor.
Overheating and surge currents are the main killers of
SIDACs. Correct mounting, soldering, and forming of the
leads also help protect against component damage.
EIA/JEDEC: JESD22-A102
168 hours (121°C at 2 ATMs) and
100% RH
Autoclave
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
ANSI/J-STD-002: Category 3, Test A
Repetitive Surge
Life Testing
Multi firings per half cycle at 60Hz in
application circuit for 168 hours minimum
Dimensions — DO-15 (G Package)
Dimension
L
G
L
Millimeters
Max
Min
Max
B
0.028
0.034
0.711
0.864
D
0.120
0.140
3.048
3.556
G
0.235
0.270
5.969
6.858
L
1.000
D
B
Inches
Max
25.400
Product Selector
Part Number
Switching Voltage Range
Blocking Voltage
Packages
VBO Minimum
VBO Maximum
VDRM
K2201GL
200V
230V
180V
DO-15
K2401GL
220V
250V
190V
DO-15
K2501GL
240V
265V
200V
DO-15
K3601GL
340V
380V
270V
DO-15
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/25/16
Teccor® brand Thyristors
Standard Unidirectional SIDACs
Packing Options
Part Number
Package
Kxxx1GL
Packing Mode
Base Quantity
Bulk
1000
Tape & Reel
5000
DO-15
Kxxx1GLRP
Note: xxx = voltage
DO-15 Embossed Carrier RP Specifications
Meets all EIA RS-29-6 Standards
DO-15
10.0 - 14.0
(254.0 - 356.0)
Dimensions
are in inches
(and millimeters).
2.063
(52.4)
3.15 (80.0) TYP
0.898
(22.8)
Direction of Feed
0.252
(6.4)
0.197
(5.0)
Part Marking System
Part Numbering System
DO-15
K 220 1 G L RP
SERIES
K: Sidac
VOLTAGE
220: 200 to 230V
240: 220 to 250V
250: 240 to 265V
360: 340 to 380V
CIRCUIT FUNCTION
1: Multipulse™
PACKAGING OPTIONS
Blank: Bulk
RP: Tape and Reel
INCREASED H.V.
GENERATION CAPABILITY
Kxxx1GL
®
YMXXX
DEVICE PACKAGE
G: DO-15
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/25/16