Graphics Controller PICtail™ Plus Epson S1D13517 Board Information Sheet Features • Graphics display controller (U1), Epson S1D13517, supporting 18/24-bit TFT interfaces, 16/24-bit color depth, maximum display resolution of 960x960, multiple frame buffering with external SDRAM, alpha-blending, picture-in-picture, transparency • 128-Megabit (8Mx16) SDRAM (U4) for frame buffering • 64-Megabit serial Flash memory (U3) for additional data storage • Display connector (J2) for interfacing with different display boards • PICtail™ Plus Interface (J1) for connecting to Explorer 16 Development Board • Starter Kit Connector (J3) to connect any of the Starter Kits Getting Started Americas Asia/Pacific Europe Atlanta - 678-957-9614 Boston - 774-760-0087 Chicago - 630-285-0071 Cleveland - 216-447-0464 Dallas - 972-818-7423 Detroit - 248-538-2250 Kokomo - 765-864-8360 Los Angeles - 949-462-9523 Phoenix - 480-792-7200 Santa Clara - 408-961-6444 Toronto - 905-673-0699 Australia - Sydney - 61-2-9868-6733 China - Beijing - 86-10-8528-2100 China - Chengdu - 86-28-8665-5511 China - Chongqing - 86-23-8980-9588 China - Hong Kong SAR - 852-2401-1200 China - Nanjing- 86-25-8473-2460 China - Qingdao - 86-532-8502-7355 China - Shanghai - 86-21-5407-5533 China - Shenyang - 86-24-2334-2829 China - Shenzhen - 86-755-8203-2660 China - Wuhan - 86-27-5980-5300 China - Xiamen - 86-592-2388138 China - Xian - 86-29-8833-7252 China - Zhuhai - 86-756-3210040 India - Bangalore - 91-80-3090-4444 India - New Delhi - 91-11-4160-8631 India - Pune - 91-20-2566-1512 Japan - Yokohama - 81-45-471-6166 Korea - Daegu - 82-53-744-4301 Korea - Seoul - 82-2-554-7200 Malaysia - Kuala Lumpur - 60-3-6201-9857 Malaysia - Penang - 60-4-227-8870 Philippines - Manila - 63-2-634-9065 Singapore - 65-6334-8870 Taiwan - Hsin Chu - 886-3-6578-300 Taiwan - Kaohsiung - 886-7-213-7830 Taiwan - Taipei - 886-2-2500-6610 Thailand - Bangkok - 66-2-694-1351 Austria - Weis - 43-7242-2244-39 Denmark - Copenhagen - 45-4450-2828 France - Paris - 33-1-69-53-63-20 Germany - Munich - 49-89-627-144-0 Italy - Milan - 39-0331-742611 Netherlands - Drunen - 31-416-690399 Spain - Madrid - 34-91-708-08-90 UK - Wokingham - 44-118-921-5869 08/04/10 Microchip Technology Inc. • 2355 West Chandler Blvd. • Chandler, AZ 85224-6199 www.microchip.com The Microchip name and logo, the Microchip logo, and MPLAB are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2011, Microchip Technology Incorporated, Printed in the U.S.A. All Rights Reserved. 08/10 DS51948B An Explorer 16 Development Board (DM240001) or one of the starter kits is required, but only one should be used. An external 9V (AC162039) power supply can be connected through the Explorer 16 or directly to connector J5. When a starter kit is used, the setup can be powered via the USB debugger. If your USB is unable to supply enough power, the external power supply should be used. Finally, a display board, such as the Graphics Display Truly 7" 800x480 Board (AC164127-9), should be connected to the display connector. For more information on this board and a list of available graphics display boards, check the Graphics link on the Development Tools webpage at: www.microchip.com. This board can be used in conjunction with the Microchip Graphics Library. The Microchip Graphics Library and other firmware examples can be downloaded from http://www.microchip.com/graphics. Please refer to the “Getting Started” topic in the Microchip Graphics Library Help file in the Microchip Application Library (MAL) to program and run demonstration projects in MAL. Board Settings • Jumper, JP1, connects an interrupt signal, PEN_INT, from the Display Connector to either signal, RA14 or RA15 (open by default) • Jumper, JP2, selects the data bus width for the S1D13517 graphics display controller. When a jumper is plugged in, the data bus is 16-bit and when unplugged, it is 8-bit (16-bit by default). • Jumpers JP3, JP4, JP5, and JP6 select the SPI channel between SPI1 and SPI2 for communication with Flash memory (U3) (SPI2 by default). TABLE 1: SIGNAL INTERFACE FOR DISPLAY CONNECTOR Pin # Symbol Pin # Symbol Level A1, B1 +9V +9.0V Power supply Level Description B11 BKLHT_PWM O A2, B2 A3, A4 B3, B4 GND +3.3V +5V GND Ground +3.3V Power supply +5.0V Power supply A12, B12 A13 B13 GND SHIFT DEN A5, B5 A6 B6 GND LEFT/XTOP/Y- GND Ground I/O Touch panel left I/O Touch panel top A7 RIGHT/X+ A14 B14 A15-A26, B15-B26 A27 FRAME LINE LDATA0LDATA23 GPO0 B7 BOTTOM/Y+ B27 GPO1 O A8 PEN_INT I A28 SCK O B8 SENSE I B28 SDO O PIC® MCU SPI SDO A9 SCK O Pen interrupt (touch panel driver) 5-wire touch panel sense PIC® MCU SCK Can be configured as display reset or as a GP output Can be used for SPI CS or as a GP output PIC® MCU SPI SCK A29 GPO2 O B9 A10 SDO SDI O I PIC® MCU SDO PIC® MCU SDI SDI NC I — B10 A11 SS BKLHT_EN O O PIC® MCU SS Enable for backlight driver B29 A30-A31, B29-B31 A32, B32 Can be used for display DC or as a GP output PIC® MCU SPI SDI Not connected I/O Touch panel right I/O Touch panel bottom GND Description PWM output for backlight driver GND Ground O Pixel shift signal O Data enable for 24-bit digital RGB interface O Frame pulse O Line pulse O 24-bit data O GND Ground Graphics Controller PICtail™ Plus Epson S1D13517 Board Information Sheet 2 Schematics (Revision 1.1) Sheet 1 of 2 1 J4 DS51948B Graphics Controller PICtail™ Plus Epson S1D13517 Board Information Sheet Schematics (Revision 1.1) Sheet 2 of 2 DS51948B