Compact Outdoor Solid State Power Amplifiers 100W Ka-Band FEATURES • • • • • • • • • • • 100W Ka-Band Compact Outdoor SSPA Compact size and weight CE Compliance Tested Integrated forced-air cooling system Extreme Environmental Testing RF Output Sample Port Maintenance Free Operation Universal, Power Factor Corrected Power Supply Built-in 1:1 Redundancy Control Built-in Maintenance Switch Controller Ethernet Interface RS-485 Description OPTIONS The Teledyne Paradise Datacom Compact Outdoor Solid State Power Amplifier (SSPA) is built for extreme environmental conditions and high reliability operation. Along with the robust construction exists the highest power density in the industry. This allows solid state technology to be used in applications that have long been reserved for TWTAs. • This Ka-Band SSPA weighs in at less than 44 lbs. (20.0 kg), and is only slightly larger than a shoe box. • • • • • • • Custom Frequency SubBands Antenna Mounting Kit Remote Control Panel L-Band Input FSK monitor & control via IFL Phase Combined Systems Low line voltage operation Optional side-mount AC input for SNG installations SPECIFICATIONS • • • Antenna-mount 1:1 system w/ mounting frame Teledyne Paradise Datacom LLC 328 Innovation Blvd., Suite 100 State College, PA 16803 USA Tel: 1 (814) 238-3450 Fax: 1 (814) 238-3829 1 OF 5 Compact Outdoor housing 10.0 X 19.5 X 8.75 in 254 X 496 X 222 mm 50.0 lbs. / 22.7 kg White powder coat finish Operating temperature: -40 to +60 °C SNG-mount 1:1 system w/ side-mount AC input www.paradisedata.com Teledyne Paradise Datacom Ltd. 2&3 The Matchyns, London Road, Rivenhall End Witham, Essex CM8 3HA United Kingdom Tel: +44(0) 1376 515636 Fax: +44(0) 1376 533764 211118 REV F ECO 17997 Compact Outdoor Solid State Power Amplifiers 100W Ka-Band Specifications, Ka-Band SSPAs PARAMETER Frequency Range Output Power Typical, Psat Guaranteed minimum, PLinear 1 Power Requirements Line Frequency Line Power (Voltage) (typical @ 220 VAC) NOTES LIMITS UNITS Frequency selection “A” Frequency selection “B” 30.00 to 31.00 29.00 to 30.00 GHz GHz HPAA2100ACXXXXXG Psat / PLinear 50.0 (100) / 47.0 (50) dBm (W) power factor HPAA2100ACXXXXXG .91 47 to 63 Psat / PLinear 2000 / 1500 (180 to 265)2 Hz W (VAC) Note 1: PLinear = maximum output power at which third order intermodulation products < -25 dBc (for two tones separated by 5 MHz) or spectral regrowth on a single QPSK at 1.5 x symbol rate or OQPSK at 1.0 x symbol rate is < -30 dBc. Note 2: Available with low line voltage option, 90 to 265 VAC. Common Electrical Specifications PARAMETER NOTES LIMITS UNITS range full band per 40 MHz -40 °C to +60 °C at constant temperature 0.1 dB resolution 55-75 ± 1.0 ± 0.3 ± 1.5 ± 0.25 20 dB dB dB/40 MHz dB dB/24 hours dB At PLinear (Psat - 3 dB) -25 dBc AM/PM Conversion @ rated PLinear ≤ 1.0 Spurious Harmonics (SSPA only) @ rated PLinear @ rated PLinear -65 -50 dBc dBc 1.50:1 (13.9) (dB) at maximum gain 10 dB Group Delay (per 40 MHz segment) Linear Parabolic Ripple 0.01 0.003 1.0 ns/MHz ns/MHz2 ns p-p Transmit Band Noise Output Power Density TX Band -75 dBW/4 KHz Offset frequency from carrier 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz -110 -120 -130 -135 -140 -140 -140 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz -90 -100 -110 -120 -125 -130 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Range Accuracy Psat to (Psat - 20) ± 0.5 dB dBm Gain Gain Flatness Gain Slope Gain Variation vs. Temperature Gain Stability Gain Adjustment Intermodulation Distortion (Two-tone, 5 MHz spacing) Input/Output VSWR Noise Figure Residual AM Noise, typical Residual Phase Noise, typical (SSPA only) True RF Power Detector 2 OF 5 o /dB 211118 REV F ECO 17997 Compact Outdoor Solid State Power Amplifiers 100W Ka-Band Optional L-Band Operation Teledyne Paradise Datacom offers Ka-Band amplifiers with an integrated L-Band Block Up Converter. The L-Band units utilize Paradise Datacom’s proprietary zBUCTM technology. The addition of a zBUC converter to a Compact Outdoor SSPA typically increases the gain by 2-4 dB. The advantages of zBUC technology include: • • • • • zBUC converters can detect and switch to an extenally supplied reference. Optional internal high stability (50 MHz) reference. zBUC converters can lock to an externally supplied reference of 5, 10, or 50 MHz without modification. zBUC converters can accept a wide range of external reference power (-10 dBm to +5 dBm) zBUC converters can accept FSK monitor and control signal via the IFL for complete amplifer remote control. Available Frequency Plans Band Frequency Band IF Input LO Frequency RF Output Ka Standard Ka-Band 1.0 - 2.0 GHz 29.0 GHz 30.00 - 31.00 GHz Ka Extended Ka-Band 1.0 - 2.0 GHz 28.0 GHz 29.00 - 30.00 GHz Electrical Specifications for Compact Outdoor with zBUC converter PARAMETER NOTES LIMITS UNITS Gain Gain Flatness Gain Slope Gain Stability range Full band per 40 MHz -40 to +55 °C 55-75 ± 2.0 ± 0.75 ± 2.5 dB dB dB/40 MHz dB Phase Noise Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz Spurious Noise Figure Absolute max. -30 -60 -70 -80 -90 -90 In-Band Signal Related Close to Carrier Spurious (≤ 20 MHz) Local Oscillator Ka-band (typ.) -50 -65 -76 -85 -105 -120 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz -50 -50 -30 dBc dBc dBm At 75 dB gain setting 20 dB Input VSWR (Return Loss) L-Band 1.5 : 1 (13.9) (dB) Internal Reference Option Aging per day (after 30 days) Aging per year (after 30 days) Reference Stability over Temperature (-20 to +85 °C) ± 1 • 10-9 ± 6 • 10-8 ± 3 • 10-8 3 OF 5 211118 REV F ECO 17997 Compact Outdoor Solid State Power Amplifiers 100W Ka-Band Outline Drawing, 100W Ka-Band Compact Outdoor SSPA Mechanical & Environmental Specifications PARAMETER Size Weight NOTES LIMITS UNITS width X length X height 10.0 X 19.51 X 8.75 254.0 X 495.6 X 222.3 inches mm 100W Ka-Band With Internal zBUC 50 (22.7) ±3% +1.7 (0.8) lbs. (kg) lbs. (kg) Paint White; powder coat RF Input L-Band Input RF Output RF Output Sample Line Power Monitor and Control Link Port Redundancy Switch Auxiliary +15VDC LNB Power (500 mA) 2.92 mm Type N WR28 Waveguide 2.92 mm 3-pin MS-type 32-pin MS-type 6-pin MS type 6-pin MS-type 6-pin MS-type Female Female Grooved Flange Female Plug Socket Socket Socket Socket Ambient -40 to +60 °C Finish Connectors Operating Temperature Relative Humidity Cooling System Ingress Protection Rating Audible Noise Altitude Condensing 100 % Integrated, Forced air 103 CFM With connectors properly sealed IP54 Measured 1m from unit, at Psat 74 Shock 50 g p-p, 11 msec pulses Vibration 3g rms 30 min. 5-2000 Hz 4 OF 5 dBA No temperature de-rating up to 10,000 ft, (3000 m) De-rate maximum temperature by 2°C per 1,000 ft (300 m) beyond 10,000 ft. 211118 REV F ECO 17997 Compact Outdoor Solid State Power Amplifiers 100W Ka-Band Part Number Configuration HPA A 2 C X G GaN Designator Band G = GaN Device A = Ka-Band Configuration Modifier 3 X = Standard A = Side-mount AC Input, Location ‘A’ C1 = Side-mount AC Input, Location ‘B’ Power Level (in Watts) Ka-Band 100 1 Frequency Sub Band Ka-Band A1 - 30.00 - 31.00 GHz B1 - 29.00 - 30.00 GHz 1 Configuration Modifier 2 X = Standard M = MS-Connector Covers Available with optional BUC. Configuration Modifier 1 Package X = Standard K = 110 VAC Option C = Standard Compact Outdoor Block Up Converter B = BUC Custom M = Internal Reference ZBUC P = External Reference ZBUC X = None Unavailable in system configurations. System Configuration X = Standalone Refer to the following specification sheets: • 203581 for Redundant Systems; • 203582 for Phase Combined Systems. Example: A standalone 100W Ka-Band (30.0 - 31.0 GHz) Compact Outdoor SSPA with optional MS-Connector covers is part number: HPAA2100ACXXXMXG. Use and Disclosure of Data The information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, re-export or diversion contrary to U.S. law is prohibited. Specifications are subject to change without notice. 5 OF 5 211118 REV F ECO 17997