ELECTRICAL SOLUTIONS Pan-Ty ® A. System Overview Cable Ties – Metal Detectable Nylon 6.6 and Polypropylene • Metal impregnated material allows identification by metal detectors or x-ray inspection equipment to help meet food, beverage, and pharmaceutical safety standards, to help reduce product contamination, loss, and recall • Nylon material for general purpose maintenance and repair applications; ideal for use in control panels and overhead cable runs • Polypropylene material provides excellent chemical resistance for use in processing and packaging areas where aggressive acid and alkaline chemicals are use to clean the equipment • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation Curved Tip Length Part Number In. Width mm Thickness Min. Loop Tensile Str. In. mm In. mm In. mm Lbs. N .098 2.5 .044 1.1 .87 22 18 80 Recommended Installation Tool Material Std. Pkg. Qty. Std. Ctn. Qty. GTS, GTSL, GS2B, STS2 Nylon 6.6 100 1000 Nylon 6.6 Miniature Cross Section PLT1M-C86 3.9 100 Intermediate Cross Section PLT2I-C86 8.0 203 .135 3.4 .047 1.2 2.00 51 40 178 GTS, GTSL, GS2B, STS2 Nylon 6.6 100 1000 GTS, GTSL, GS2B, GTH, GS4H, STS2, STH2 Nylon 6.6 Nylon 6.6 100 100 1000 1000 Nylon 6.6 100 1000 GTH, GS4H, GS4EH, STH2, ST3EH Nylon 6.6 50 500 Nylon 6.6 50 500 GTS, GTSL, GS2B, STS2 Polypropylene Standard Cross Section PLT2S-C86 PLT3S-C86 7.3 11.5 186 291 .190 .190 4.8 4.8 .057 .057 1.4 1.4 1.85 3.00 47 76 50 50 222 222 PLT4S-C86 14.4 366 .190 4.8 .057 1.4 4.00 102 50 222 Light-Heavy Cross Section (Straight Tip) PLT3H-L86 11.1 282 .300 7.6 .075 1.9 3.00 76 120 534 PLT4H-L86 14.4 366 .300 7.6 .075 1.9 4.00 102 120 534 Miniature Cross Section 3.9 100 0.098 2.5 0.044 1.1 0.87 22 15 67 100 8.0 203 .135 3.4 .047 1.2 2.00 51 24 107 GTS, GTSL, GS2B, STS2 Polypropylene 100 1000 .190 .190 .190 4.8 4.8 4.8 .057 .057 .057 1.4 1.4 1.4 1.85 3.00 4.00 47 76 102 30 30 30 133 133 133 GTS, GTSL, GS2B, GTH, GS4H, STS2, STH2 Polypropylene 100 1000 Polypropylene Polypropylene 100 100 1000 1000 Standard Cross Section PLT2S-C186 PLT3S-C186 PLT4S-C186 7.3 11.5 14.4 186 291 366 Light-Heavy Cross Section (Straight Tip) PLT3H-L186 11.1 282 .300 7.6 .075 1.9 3.00 76 60 267 PLT4H-L186 14.4 366 .300 7.6 .075 1.9 4.00 102 60 267 Part Number Material Used with Cable Ties GTH, GS4H, GS4EH, STH2, ST3EH A B C Length Width Height Counterbore In. In. In. Diameter (mm) (mm) (mm) In. (mm) Polypropylene 50 500 Polypropylene 50 500 Mounting Method Std. Std. Pkg. Ctn. Qty. Qty. Cable Tie Mounts TM2S8-C86 Min., Int., Std. Nylon 6.6 TM3S8-C86 Std., Lt. Hvy. TM3S10-C86 TM2S8-C186 Min., Int., Std. Polypropylene TM3S8-C186 Std., Lt. Hvy. TM3S10-C186 .630 (16.0) .867 (22.0) .630 (16.0) .867 (22.0) .422 (10.7) .614 (15.6) .422 (10.7) .614 (15.6) .275 (7.0) .373 (9.5) .275 (7.0) .373 (9.5) .325 (8.3) .325 (8.3) .325 (8.3) .325 (8.3) C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals 1000 Intermediate Cross Section PLT2I-C186 C1. Wiring Duct D2. Power Connectors Polypropylene PLT1M-C186 B2. Cable Accessories B3. Stainless Steel Ties Straight Tip Max. Bundle Dia. B1. Cable Ties #8 (M4) screw 100 500 #8 (M4) screw 100 500 #10 (M5) screw 100 500 100 500 #8 (M4) screw #8 (M4) screw 100 500 #10 (M5) screw 100 500 For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B1.21