ELECTRICAL SOLUTIONS A. System Overview Male Disconnect, Non-Insulated – Butted Seam B1. Cable Ties Type D-MB • Male tab couples with (all 0.250 x 0.032) female disconnects • Male tab can be inserted and removed from the female disconnect without the use of tools for lower installed cost • Internal barrel serrations assure good wire contact and maximum tensile strength Part Number D18-250MB-C L Wire Range 22 – 18 AWG • Barrel of terminal internally beveled to provide quick and easy wire insertion • Maximum recommended operating temperature 302°F (150°C) • Rated up to 2000 V Figure DImensions (In.) L 0.69 Tab Size (In.) 0.250 x 0.032 D14-250MB-C 16 – 14 AWG 0.69 0.250 x 0.032 D10-250M-L* 12 – 10 AWG 0.72 0.250 x 0.032 Recommended Installation Tool CT-100A CT-100A, CT-200, CT-260, CT-1570, CT-2500 Std. Pkg. Qty.** 100 Std. Ctn. Qty. 500 100 500 50 500 * Brazed seam. **To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. For crimping tool information, see pages D1.83, D1.84, and D1.88. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)