ELECTRICAL SOLUTIONS A. System Overview Metric Fork Terminals, Nylon Insulated – Non-Funnel Entry Type PMN-F • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Fork design provides for fast and easy installation, without the need to remove fastener • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength • UL Flammability UL 94V-2/HB, maximum insulation temperature 221°F (105°C) • UL and CSA rated up to 600 V per UL 486A/B W C1. Wiring Duct C Wire Range (mm2) Color Code Max. Ins. (mm) 0.5 – 1.0 Red 3.7 1.5 – 2.5 4.0 – 6.0 Blue Yellow 4.1 5.7 Stud Size M3 M4 M5 M6 M3 M4 M5 M6 M4 M5 M6 Figure Dimensions (mm) L 19.9 21.6 21.8 26.4 19.8 21.3 21.9 26.2 25.7 25.7 28.5 W 5.9 8.2 8.9 11.2 5.9 7.9 8.6 11.2 7.9 9.5 11.0 B2. Cable Accessories B3. Stainless Steel Ties L Part Number PMN1-3F-3K PMN1-4F-3K PMN1-5F-3K PMN1-6F-3K PMN2-3F-3K PMN2-4F-3K PMN2-5F-3K PMN2-6F-3K PMN6-4F-2K PMN6-5F-2K PMN6-6F-2K B1. Cable Ties C 5.0 5.8 6.3 8.4 5.1 5.9 6.4 8.5 6.1 6.1 8.2 CA9 Series Crimp Die CA-800/EZ Series Crimp Die CD9-1A CD-800-1 CD9-2A CD9-3B CD-800-2 CD-800-3 Pieces Per Reel 3000 3000 3000 3000 3000 3000 3000 3000 2000 2000 2000 C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals For applicator information, see page D1.143. Metric Fork Terminals, Nylon Insulated – Funnel Entry Type PMNF-F • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Flange design provides extra secure connection on a variety of applications • Fork design provides for fast and easy installation, without the need to remove fastener • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength • UL Flammability UL 94V-2/HB, maximum insulation temperature 221°F (105°C) • UL and CSA rated up to 600 V per UL 486A/B L W D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels C Part Number PMNF1-3F-3K PMNF1-4F-3K PMNF1-5F-3K PMNF1-6F-3K PMNF2-3F-3K PMNF2-4F-3K PMNF2-5F-3K PMNF2-6F-3K PMNF6-4F-2K PMNF6-5F-2K PMNF6-6F-2K Wire Range (mm2) Color Code Max. Ins. (mm) 0.5 – 1.0 Red 3.7 1.5 – 2.5 Blue 4.1 4.0 – 6.0 Yellow 5.7 Stud Size M3 M4 M5 M6 M3 M4 M5 M6 M4 M5 M6 Figure Dimensions (mm) L 20.0 21.6 21.8 26.4 19.8 21.3 21.9 26.2 25.7 25.7 28.5 W 5.9 8.2 8.9 11.2 5.9 7.9 8.6 11.2 7.9 9.5 11.0 C 5.0 5.8 6.3 8.4 5.1 5.9 6.4 8.5 6.1 6.1 8.2 CA9 Series Crimp Die CA-800/EZ Series Crimp Die CD9-1A CD-800-1 CD9-2A CD-800-2 CD9-3B CD-800-3 Pieces Per Reel 3000 3000 3000 3000 3000 3000 3000 3000 2000 2000 2000 For applicator information, see page D1.143. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index