ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Low Profile Mounts – Screw Applied • Low profile design keeps bundle close to mounting surface • Small overall size • Install with a screw or rivet for a strong, secure installation B2. Cable Accessories • For indoor use only • Material: Nylon 6.6 .75 (19.1) .40 (10.2) .32 (8.1) B3. Stainless Steel Ties .10 (2.5) .50 (12.7) LPMM .12 (3.0) LPMS C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals Part Number LPMM-S2-C LPMM-S5-C Used with Cable Ties‡ M M LPMS-S8-C M, I, S • Eliminate screws • Secure wires to any pre-drilled panel • Can be installed in any panel thickness 100 1000 • Low profile design keeps bundle close to mounting surface • For indoor use only • Material: Nylon 6.6 .53 REF. (13.5) .19 (4.8) .74 (18.7) A .23 (5.8) .49 (12.45) Part Number KIMS-H366-C2 KIMS-H430-C6 Used with Cable Ties‡ M, I, S KIMS-H500-C4 E3. Pre-Printed & Write-On Markers #8 (M4) Countersunk Screw Low Profile Mounts – Push Rivet Applied D3. Grounding Connectors E2. Labels Natural Std. Std. Pkg. Ctn. Qty. Qty. 100 1000 100 1000 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard. D2. Power Connectors E1. Labeling Systems Color Mounting Method #2 (M2) Countersunk Screw #5 (M3) Countersunk Screw .12 (3.0) Hole Diameter A In. .144 mm 3.7 Color Red .169 4.3 Blue .196 5.0 Yellow Mounting Method Integral Push Rivet Integral Push Rivet Integral Push Rivet Std. Std. Pkg. Ctn. Qty. Qty. 100 1000 100 1000 100 1000 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard. E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.