ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Steel® Nylon 11 Coated Strapping – MSC Series • Fold over design provides high-retained tension in mechanical fastening and cable bundling applications • After tensioning, cut end is locked inside low profile buckle – no sharp edges • AISI 316 stainless steel for the most corrosive environments • Available in 0.38 inch (9.5mm), 0.50 inch (12.7mm), 0.63 inch (15.9mm) cross sections • UV resistant, low smoke, halogen-free material • Temperature tolerance -40°F (-40°C) to 285°F (140°C) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number MSC2W38T15-L6 Max. Bundle Diameter In. mm 2.0 51 C3. Abrasion Protection MSC4W38T15-L6 MSC6W38T15-L6 MSC8W38T15-L6 4.0 6.0 8.0 C4. Cable Management MSC10W38T15-L6 MSC4W50T15-L6 MSC6W50T15-L6 MSC8W50T15-L6 D1. Terminals C2. Surface Raceway D2. Power Connectors Length* In. mm 11.8 300 Strap Breaking Strength Lbs. N 502 2229 Min. Bundle Diameter In. mm 1.00 25.4 Width In. mm 0.38 9.5 Thickness^ In. mm 0.015 0.38 102 152 203 18.0 24.4 30.7 457 620 780 502 502 502 2229 2229 2229 1.00 1.00 1.00 25.4 25.4 25.4 0.38 0.38 0.38 9.5 9.5 9.5 0.015 0.015 0.015 10.0 4.0 6.0 8.0 254 102 152 203 37.0 18.0 24.4 30.7 940 457 620 780 502 671 671 671 2229 2979 2979 2979 1.00 1.00 1.00 1.00 25.4 25.4 25.4 25.4 0.38 0.50 0.50 0.50 9.5 12.7 12.7 12.7 MSC10W50T15-L6 MSC4W63T15-L6 MSC6W63T15-L6 MSC8W63T15-L6 10.0 4.0 6.0 8.0 254 102 152 203 37.0 18.0 24.4 30.7 940 457 620 780 671 839 839 839 2979 3725 3725 3725 1.00 1.00 1.00 1.00 25.4 25.4 25.4 25.4 0.50 0.63 0.63 0.63 MSC10W63T15-L6 10.0 254 37.0 940 839 3725 1.00 25.4 0.63 Recommended Installation Tool*** Std. Pkg. Qty. 50 Std. Ctn. Qty. 250 0.38 0.38 0.38 50 50 50 250 250 250 0.015 0.015 0.015 0.015 0.38 0.38 0.38 0.38 50 50 50 50 250 250 250 250 12.7 15.9 15.9 15.9 0.015 0.015 0.015 0.015 0.38 0.38 0.38 0.38 50 50 50 50 250 250 250 250 15.9 0.015 0.38 50 250 BT2HT *Other lengths available, contact Panduit Customer Service. ***For information on installation tools, refer to page B3.26. ^Base material less coating. D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.