Wall Board Adapter: PN99D

Wall Board Adapter
Part Numbers: MWBA1, MWBA-2G
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
PN99D
Designed for Communication or Data Wiring Applications
USE ONLY WHERE LOCAL CODES PERMIT
NOT INTENDED FOR USE WITH
ELECTRONIC WIRING DEVICES
SINGLE GANG ADAPTER (MWBA)
1. Cut a 3.75" (95.3mm) x 2.00" (50.8mm) hole in the drywall.
DOUBLE GANG ADAPTER (MWBA-2G)
1. Cut a 3.81" (96.8mm) x 3.78" (96mm) hole in the drywall.
2. Partially thread the mounting tabs. Insert assembly into
hole and center.
3. Rotate the mounting tabs behind the drywall. Thread the
mounting tabs until snug.
SIDE VIEW
Maximum drywall thickness - 0.75" (19.1mm). Avoid studs.
TEMPLATE FOR
SINGLE GANG
ADAPTER
TEMPLATE FOR
DOUBLE GANG
ADAPTER
E-mail:
[email protected]
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 1 of 1
Phone:
866-405-6654