Opti-Core® Push-Pull LC Duplex Fiber Optic Patch Cords S P E C I F I C AT I O N S H E E T technical information Push-Pull LC Duplex Fiber Optic Patch Cords containing the custom push-pull strain relief boot and duplex clip, allow users easy accessibility when deploying very high density LC patch fields in data center applications. Available in riser (OFNR), and low smoke zero halogen (LSZH) rated jacket materials to comply with local cabling ordinances and OM4, OM3 or OS1/OS2 fiber types to meet the demands of today's highest speed applications. application Provide interconnect and cross-connect of applications in entrance facilities, telecommunication rooms, data centers, at the desk and network applications to interconnect pre-terminated cassettes in main distribution, horizontal distribution, and equipment distribution areas. construction physical properties Fiber count: Duplex (2-fiber) jacketed zipcord Cable outside diameter (OD): 1.6mm duplex Cable jacket ratings: Riser (OFNR) Low Smoke Zero Halogen (LSZH) per: IEC 60332-1-2, IEC 60332-3-24, IEC 60754-1, IEC 60754-2, IEC 61034-2 Bend Radius (min) Short-Term: 16mm Bend Radius (min) Long-Term: 32mm Connector cable retention: 50N (4.24lb) @ 0° 19.4N (4.4lb)@ 90° Singlemode: OS1/OS2 9/125µm Multimode: OM3 50/125µm OM4 50/125µm Connector durability: 500 cycles Fiber types: Connector types, End ‘A’: Duplex LC Connector types, End ‘B’: Duplex LC Jacket color: OS1/OS2: Yellow OM3:Aqua OM4:Aqua optical properties environmental properties Connector insertion loss: Storage and wshipping temperature: -40°C to 70°C Operating and installation temperature: -10°C to 60°C Connector return loss: Standard: 0.25dB max (OM3 and OM4) 0.35dB max (OS2) Optimized: 0.15dB max (OM3 and OM4) Ultra: 0.10dB max (OM4) 26dB min (OM3 and OM4) 55dB min (OS1/OS2) standards Meets or exceeds ISO/IEC 11801, TIA-568-C.3, TIA-604-10 (FOCIS-10) Restriction of Hazardous Substances (RoHS) Compliance: w w w. p an d uit .co m All patch cord components meet the requirement of Directive 2002/95/EC Opti-Core® Push-Pull LC Duplex Fiber Optic Patch Cords part number configurator Example: FX2ERQ1Q1SNM005 = Fiber, OM3, 2-fiber, 1.6mm cable, riser rated, LC push-pull connector to LC push-pull connector, standard IL, 5 meters Character 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Example F X 2 E R Q 1 Q 1 S N M 0 0 5 1 2 3 4 5 – Fiber Product F = Fiber – Fiber Type X = OM3 50/125µm Z = OM4 50/125µm 9 = OS1/OS2 9/125µm – Fiber Count 2 = 2-fiber – Cable Type E = 1.6mm – Jacket Type L = LSZH (Low Smoke Zero Halogen) R = OFNR (Riser) 6 – Connector Type Q = LC Push-Pull connector 7 – Connector Variant 1 = 1st Gen (Low Profile Duplex LC) 8 – Connector Type Q = LC Push-Pull connector 9 – Connector Variant 1 = 1st Gen (Low Profile Duplex LC) 10 – Performance/Construction S = Standard IL/Straight Through (A-B) O = Optimized IL/Straight Through (A-B) N = Ultra IL/Straight Through (A-B) 11 – Connector Variant N = No variant 12 – Unit of Length M = Meters F = Feet 13, 14, 15 – Length 001 - 050 in 1 meter increments 1/2 meter increments available between 1 and 10 meters, ex 3.5 Foot-length increments available from 1 to 25 feet in Riser-rated jacket only polarity changeover 1 2 Retaining feature 3 Duplex clip A B Squeeze both sides of the boot. Squeezing sides lifts boot over retaining feature. Carefully slide boot backward while still squeezing sides. Remove both connectors from duplex clip and switch positions of A/B. Only perform this change on one end of the patch cord. Other options are available as follows; contact Panduit for part number. Fiber type: OM4+ Signature Core™ Performance/Construction: Optimized IL – Straight Through (A-B), Optimized IL – Flipped (A-A), Standard IL – Flipped (A-A) WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. FBSP90--WW-ENG 2/2015