Full Length Blanking Shade: RKSP148--WW-ENG

Full Length Blanking Shade
S P E C I F I C AT I O N S H E E T
specifications
The full length blanking shade shall blank out as few as four rack units, or
as many as 51 consecutive rack units. The upper housing of the full length
blanking shade shall contain a rolled fabric material secured to a spring
roller and be designed for installation in the upper rack units of the rack or
cabinet. The bottom handle of the adjustable shade can then be secured
to the appropriate rack unit using sliding latches to blank out the desired
number of rack units. Hand tools shall not be required for installation.
technical information
Standards:
Suitable for 19.00" width (482.6mm) vertical mounting rails that meet
CEA-310-E standards; vinyl laminate material meets ASTM D6413
Compatibility:
Solution suitable for 0.38" (9.5mm) square or #10 (M5) and #12 (M6)
round tapped holes typically found in EIA vertical mounting rails
Temperature range: 0°C to 50°C (32°F to 122°F) continuous; 70°C (158°F) intermittent
Electrostatic
Surface resistivity is 3.0 x 104 ohms per unit square
dissipative (ESD):
RoHS compliance: Compliant
Full Length Blanking Shade
Full length blanking
shade to blank out 4 – 51
consecutive rack units: FLBSIM-51
Tool-Less Blanking Panels
1 RU x 19.00" (482.6mm)
width for 3/8" square
cage nut holes:
TLBP1S-V
2 RU x 19.00" (482.6mm)
width for 3/8" square
cage nut holes:TLBP2S-V
1 RU x 19.00" (482.6mm)
width for round
tapped holes:TLBP1R-V
2 RU x 19.00" (482.6mm)
width for round
tapped holes:TLBP2R-V
1 RU x 19.0" (482.6mm)
width for 3/8" square
cage nut holes; includes
pass-through area:TLBPBPT1S
Cool Boot ® Grommets
(New Installations)
key features and benefits
Spring roller with retractable
fabric material
Allows fabric to be retracted and stored within its
own housing; reduces space required to store
blanking products
Impermeable fabric
Minimizes bypass airflow through consecutive open rack
units; separates the hot aisle from the cold aisle to help decrease energy costs
Component installation behind
vertical mounting rails
Reduces the chance of hot exhaust air from re-circulating
to the front (intake) of the network equipment, preventing overheating of active network equipment
Thumb screw installation for
top housing
Allows for efficient installation of the main housing; thumb
screws eliminate the need for tools and also provides a very secure means of mounting
Latch design for bottom pull
Allows for quick and easy deployment and retraction of the
blanking material
ESD materials
Reduce the chance of corrupting network equipment
Variable floating fasteners/
locator pins
Allow for variability in horizontal spacing of vertical
mounting rails
Replaceable Hole Pins
Allows installation of the same part number on vertical
mounting rails with either square or round tapped holes
Shade locator guide in housing Forces fabric material to contact vertical mounting rail to
improve sealing capabilities
applications
The full length blanking shade is designed to
provide a blanking solution for racks and
cabinets that have a large number of
consecutive open rack units. The full length
blanking shade is designed to be adjustable so
when new cabinets are put in place, or when
equipment is being serviced, the shade can be
deployed to easily and efficiently blank
out unused rack units. An impermeable fabric
w w w. p a n d u it.c o m
material coiled on a spring roller can be
deployed or retracted to accommodate the
required open rack units. A latch design, on
the bottom handle, allows easy installation on
the vertical mounting rails of most standard
racks and cabinets. The blanking shade
provides an easy solution to reduce bypass
air; thereby, decreasing energy costs.
6" x 8" (152 x 203mm):RFG6X8Y
8" x 8" (203 x 203mm):RFG8X8Y
10" x 8" (254 x 203mm):RFG10X8Y
12" x 8" (305 x 203mm):RFG12X8Y
12" x 4" (305 x 102mm):RFG12X4Y
4.50" diameter
(114.3mm):RFG3DY
6.50" diameter
(165.1mm):RFG5DY
Cool Boot ® Grommets
(Retrofit Applications)
6" x 8" (152 x 203mm):RFG6X8SMY
8" x 8" (203 x 203mm):RFG8X8SMY
10" x 8" (254 x 203mm):RFG10X8SMY
12" x 8" (305 x 203mm):RFG12X8SMY
12" x 4" (305 x 102mm):RFG12X4SMY
4.50" diameter
(114.3mm):RFG3DSMY
6.50" diameter
(165.1mm):RFG5DSMY
See Cool Boot® Raised Floor Air Sealing
Grommet: WASP42--WW-ENG.
Full Length Blanking Shade
ordering information
Part Number
FLBSIM-51
Description
Full length blanking shade blanks out 4 – 51 consecutive rack units on standard 19.00" (482.6mm) wide
vertical mounting rails; black.
19.16
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
1
1
3.11
18.31
Centerline of
rack holes
2.42
Threaded knobs for
mounting of upper
housing (2 places).
2.82
Impermeable fabric material can be deployed
to provide blanking solution for as few as 4
RU and up to a maximum of 51 RU.
3.13
Removable pins for compatibility
with round tapped hole or square
hole mounting applications.
Latch slides horizontally to engage
rails. Allows quick adjustment of bottom
handle when adding or removing network
equipment in cabinet or rack.
.73
2.09
To accommodate mounting rails with
round tapped holes, remove factory
installed pins designed for square hole
applications and replace with smaller
diameter pins found in package.
Dimensions are in inches.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
©2014 Panduit Corp.
ALL RIGHTS RESERVED.
RKSP148--WW-ENG
Replaces RKSP137--WW-ENG
12/2014