TX5e™ Category 5e UTP Copper Cable S P E C I F I C AT I O N S H E E T specifications TX5e™ UTP Copper Cabling System Category 5e cable shall meet ANSI/TIA-568-C.2 and IEC 61156-5 Category 5e component standards. The conductors shall be 24 AWG copper insulated with HDPE polymer. The copper conductors shall be twisted in pairs and all four pairs shall be covered by a low smoke zero halogen or flame retardant PVC jacket. TX5e™ UTP Copper Cable LSZH: CM: CMR: PUL5C04BU-C* PUC5C04BU-C* PUR5C04BU-C* Mini-Com ® TX5e™ PLUS UTP Jack Module Jack module: CJ5E88TGIWY** TX5e™ UTP Patch Cords – CM technical information Foot lengths: Meter lengths: Electrical performance: Certified performance in a 4-connector configuration up to 100 meters, meets ANSI/TIA-568-C.2, ISO 11801 2nd Edition Class D and IEC 61156-5 Category 5e channel and component requirements TX6 ™ PLUS UTP Patch Cords – LSZH Conductor/insulator: 24 AWG solid copper insulated with HPDE DP5e™ Punchdown Patch Panels Flame rating: LSZH – IEC 60332-1, 60754-2, 61034 PVC (CM) – UL 1685 PVC (CMR) – UL 1666 Angled, 24-port, 1RU: Angled, 48-port, 2 RU: Flat, 24-port, 1 RU: Flat, 48-port, 2 RU: PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications Installation tension: 110N (25 lbf) maximum Temperature rating: 0° to 50°C (32° to 122°F) during installation -20° to 75°C (14° to 167°F) during operation Cable jacket: LSZH – Low Smoke Zero Halogen PVC (CM) – PVC PVC (CMR) – Flame retardant PVC Cable diameter: Cable weight: Packaging: LSZH – 5.0mm (0.197 in.) nominal PVC (CM), PVC (CMR) – 4.8mm (0.189 in.) nominal LSZH – 9 kg/305m (20 lbs./1000 ft.) PVC (CM) – 8 kg/305m (18 lbs./1000 ft.) PVC (CMR) – 8.5 kg/305m (19 lbs./1000 ft.) 305m (1000 ft.) easy-pay-out box LSZH – 11 kg/305m (23 lbs./1000 ft.) PVC (CM) – 10 kg/305m (21 lbs./1000 ft.) PVC (CMR) – 10.5 kg/305m (22 lbs./1000 ft.) Packaged tested to ISTA procedure 1A key features and benefits Third party tested Cable has been tested as part of the TX5e ™ Category 5e UTP Copper Cabling System by an independent laboratory and complies with the electrical channel requirements of the following standard: ANSI/TIA-568-C.2 Category 5e standard Descending length cable markings Easy identification of remaining cable reduces installation time and cable scrap Tested beyond the standards Cable has been characterized to 350 MHz, 250 MHz above the standard Easy payout box Ensures proper performance and provides quick installation applications TX5e UTP Copper Cable is a component of the Panduit TX5e UTP Copper Cabling System. This end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond 100 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards, this system will support the following applications: • Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) • 115 Mb/s ATM, 622 Mb/s ATM • Token ring 4/16 ™ w w w. p a n d u i t . c o m ® ™ Foot lengths: Meter lengths: UTPCH3^Y UTPCH1^^MY UTPCHL3^Y UTPCHL^^1MY DPA245E88TGY DPA485E88TGY DP245E88TGY DP485E88TGY Mini-Com ® Flush Mount Modular Patch Panels Angled, 24-port, 1 RU: Angled, 48-port, 2 RU: Flat, 24-port, 1 RU: Flat, 48-port, 2 RU: CPPA24FMWBLY CPPA48FMWBLY CPP24FMWBLY CPP48FMWBLY Termination and Cable Prep Tools Termination tools: Conductor snipping tool: Conductor stripping tool: EGJT or TGJT CWST CJAST *For standard cable colors other than BU (Blue), replace BU in part number with WH (White) or IG (International Gray). Standard pallets are configured in 4 layers, 9 cartons per layer, total of 36 cartons per pallet. Add E to end of part number for European pallets which are configured in 4 layers, 6 cartons per layer, total of 36 cartons per pallet. **For standard colors other than Off White (IW), replace suffix with EI (Electrical Ivory), IG (International Gray), AW (Arctic white), WH (White), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), or VL (Violet). Add -24 to end of part number for 24 pack convenience package. ^For standard foot lengths other than 3 feet, replace the 3 in the part number with 1 to 20 (one foot increments) 25, 30, 35 or 40. For standard colors other than Off White, add suffix BU (Blue), RD (Red), YL (Yellow), or GR (Green) before the Y at the end of the part number. For example, the part number for a blue, CM, Category 5e, 5-foot patch cord is UTPCH5BUY. ^^For standard meter lengths other than 1 meter, replace the 1 in the part number with 1-10 meters (one meter increments) 0.5, 1.5, 2.5, 15, or 20. For standard colors others than Off White, add suffix BU (Blue), RD (Red), YL (Yellow), or GR (Green) before Y at the end of the part number. For example, the part number for a blue, CM, Category 5e, 5-meter patch cord is UTPCH5MBUY. TX5e™ Category 5e UTP Copper Cable Additional Specifications Mechanical Test Ultimate Breaking Strength Minimum Bend Radius Electrical Test DC Resistance DC Resistance Unbalance Mutual Capacitance Capacitance Unbalance Characteristic Impedance Nominal Velocity of Propagation (NVP) >400 N (90 Ibf) 4 x cable diameter <9.38 Ohm per 100m (328 ft.) <5% <5.6 nF per 100m (328 ft.) <330 pF per 100m (328 ft.) 100 Ohm +/-15% up to 100 MHz 65% Cable Construction Jacket Conductor Wire Conductor Insulator Rip Cord WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800-777-3300 and reference COSP167 ©2011 Panduit Corp. ALL RIGHTS RESERVED. WW-COSP167 5/2011