Pan-Way ® T-45 Surface Raceway System S P E C I F I C AT I O N S H E E T specifications Pan-Way ® T-45 Raceway T-45 non-metallic multi-channel, two-piece, hinged cover design surface raceway shall be used to route, protect, and conceal data, voice, video, fiber optic and power cabling. The raceway shall be listed as suitable for use in applications up to 600 volts between conductors by Underwriters Laboratories, Inc. per standard 5A, and by Canadian Standards Association, Inc. per 22.2 no. 62.1-03, when screw secured and installed per instructions. A full complement of fittings with a 1" minimum bend radius compliant with TIA/EIA-568-B, must be available as well as device brackets and junction boxes to install a variety of communication and electrical devices. Divider walls must be available to form separate channels in the multi-channel raceway. An offset box shall be available, with versions for “snap-on” as well as “screw mount” faceplates, for mounting the power receptacle or the data receptacles outside of the raceway channel. T-45 raceway will be manufactured from impact resistant material with flammability rating of V-0. T-45 raceway must be tamper resistant yet also allow access for moves, adds and changes. T-45 raceway finish shall be pure color and will resist scratches and dents and will not peel or corrode. Bases with adhesive 8 feet: T45BIW8-A 10 feet: T45BIW10-A Bases without adhesive 8 feet: T45BIW8 10 feet: T45BIW10 Covers 8 feet: 10 feet: T45CIW8 T45CIW10 Divider walls 8 feet: 10 feet: T45DW8 T45DW10 T-45 Raceway Fittings technical information Cover coupler fitting: T45CCIW-X Outside corner fitting: T45OCIW Inside corner fitting: T45ICIW Right angle fitting: T45RAIW End cap fitting: T45ECIW T45EEIW Material: Rigid PVC Flammability: UL94V-0 Voltage rating: UL-5A 600VAC; CSA C22.2 No. 62.1-03 600V Approvals: UL Listed 95425 (raceway); UL Listed E116129 (fittings) NEC: Article 388 Entrance end fitting: IW (Off White), EI (Electrical Ivory), WH (White) available in 8 foot lengths only without adhesive Bend radius control fitting: T45TRI LP-CSISPEC-T45-1 Reducer fitting: T45RLDIW Tee fitting: T45TIW Insert for tee fitting: T45TD Color: CSI spec form: key features and benefits Unique size 1"bend radius control fittings Provides capacity for up to 22 Category 5e cables in a 2.38" footprint which allows greater flexibility to match the raceway to the application Meets TIA/EIA standard and many warranty requirements ® T-45 Raceway Accessories Hinged data bracket: T45HDBIW Wire retainer: T45WR-X Designer profile Maintains the same aesthetically pleasing profile of Panduit T-70, Twin-70 and TG-70 Raceway which allows all four systems to work together or independently Workstation Outlet Center ™ Offset box: T45WCIW Multi-directional hinge Easy access from either side of the raceway provides more convenience for moves, adds and changes; latch is tamper resistant which provides maximum security for communication cabling and maximum safety for power cabling Workstation Outlet Center ™ Offset box: T45WC2IW Multi-channel capable Capable of routing both power and communication cabling in a single raceway Multi-termination options Ability to create many different configurations using proprietary or standard faceplate solutions provides more flexibility to meet end-user connectivity preferences applications Pan-Way ® T-45 Non-Metallic Surface Raceway is a multi-channel channel raceway which provides solutions for routing low voltage, fiber optic and/or power cabling along perimeter walls. T-45 Surface Raceway terminates using the T-45 Hinged Data w w w. pa n d u it.c o m and Power Brackets, T-45 Offset Box and Pan-Way ® Surface Mount Outlet Boxes and superior Pan-Way ® Snap-On Faceplates. Fittings for T-45 are available to transition to Pan-Way ® LD Series Raceways. Electrical bracket and box for duplex outlets: T45HEBIW Electrical bracket and box for rectangular outlets: T45HEGBIW For standard colors other than IW (Off White), replace IW in part number with EI (Electric Ivory). WH (White) is available in 8 foot lengths without adhesive only. Pan-Way ® T-45 Surface Raceway System Wire Fill T-45 Internal Area = 2.12 Sq. In. Electrical Cables 14 AWG 12 AWG Data Grade Cables 10 AWG THHN/THWN/T90 0.111 0.130 MAX MAX 0.164 24 AWG Cat. 5e – Plenum Cat. 5e – Riser Cat. 6 and Cat. 6A (SD) Cat. 6A RG6 RG59/u 2 Strand DIA = 0.193 DIA = 0.225 DIA = 0.240 DIA = 0.300 DIA = 0.275 DIA = 0.242 DIA = 0.175 Raceway Type & Configuration Fill MAX (UL Temp Rise Test) Fiber Optic Cable 24 AWG Fill Fill Area (in²) Coax Cables 24 AWG Fill 24 AWG Fill Fill Fill Fill Fill SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX MAX MAX SPEC MAX (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) T-45: No Devices 2.13 36 27 25 29 43 21 32 18 28 12 18 14 21 18 27 35 53 T-45: No Devices with wire retainer 1.72 36 27 25 23 35 17 25 15 22 9 14 11 17 14 22 28 42 T-45: Power and data with wire retainer and divider wall (2 channels) 0.44 12 11 8 — — — — — — — — — — — — — — 1.20 — — — 16 24 12 18 10 15 6 10 8 12 10 15 19 29 T-45: Power and data with wire retainer and two divider walls (3 channels) 0.44 12 11 8 6 9 4 6 3 5 2 3 2 4 3 5 7 10 0.68 — — — 9 13 6 10 6 9 3 5 4 6 5 8 11 16 0.44 — — — 6 9 4 6 3 5 2 3 2 4 3 5 7 10 T-45: Power and data using the Workstation Outlet Center™ Offset Box 0.41 12 11 8 — — — — — — — — — — — — — — 1.06 — — — 14 21 10 15 9 14 5 8 7 10 9 13 17 26 T-45: Data only using data bracket 2.00 — — — 27 41 20 30 17 26 11 16 13 20 17 26 33 49 T-45 Power and Data using Hinged Data Bracket with Divider Insert 0.52 12 8 8 — — — — — — — — — — — — — — 1.20 — — — 16 24 12 18 10 15 6 10 8 12 10 15 19 29 T-45: Power and Data Using Electrical Bracket and Box 0.22 9 4 4 — — — — — — — — — — — — — — 0.50 — — — 6 10 5 7 4 6 2 4 3 5 4 6 8 12 T- 4 5 R a c e w a y T45B T45C Fittings and Accessories T45CC**-X T45OC T45IC T45RA T45EC T45EE T45TRI T45RLD T45TD T45T T45HDB T45DW T45WR-X T45WC T45WC2 T45HEB T45HEGB WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2014 Panduit Corp. ALL RIGHTS RESERVED. SRSP24--WW-ENG 1/2014