MCO-1S-PEM-6p SMD Clock Oscillator LVPECL Features Applications: wireless communications, 10 Gigabit Ethernet Fibre Channel, broadband access, DSL, GPON Output frequency up to 700 MHz Low jitter < 3.0 ps Specification Parameter MCO-1S25-PEM-6p MCO-1S3-PEM-6p Frequency range 100 ~ 450 MHz 100 ~ 700 MHz 155.52, 156.25, 159.375, 161.1328, 164.355469, 200.0, 212.5 Standard frequencies 240.0, 250.0, 312.5, 320.0, 350.0, 347.0 MHz > 450 MHz under development 491.0 & 622.08 MHz Supply voltage +2.5 V 5 % +3.3 V 5 % Output signal LVPECL Output voltage VOH 1.475 V VOL 1.095 V VOH 2.275 V VOL 1.680 V Supply current 65 ~ 100 mA Frequency stability (*) 25 ppm over -20 ~ +70 °C 50 ppm over -40 ~ +85 °C Output load 50 to Vdc -2.0 V Jitter (rms) < 3 ps @ 12 kHz ~ 20 MHz from carrier frequency Symmetry 45 ~ 55 % @ ½ Vdc Rise / Fall time < 1 ns 20 to 80 % of amplitude Tri-state function pin #1 = high or open pin #4 & #5 signal pin #1 = low pin #4 & #5 high impedance Operating temperature range -20 ~ +70 °C commercial application -40 ~ +85 °C industrial application Storage temperature range -55 ~ +125 °C Packaging unit tape & reel 1’000 pieces (*) All inclusive: frequency stability vs. temperature, tolerance, aging, supply & load variation Customer specifications on request Pin function #1 #2 #3 #4 #5 #6 Example for solder pattern Tri-state or not connected not connected or Tri-state GND Output Complementary output Vdc Do not design any conductive path between the pattern Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 26 Jul. 10