VXO-P9-H-6p SMD VCXO HCMOS/TTL compatible Features Applications: telecommunications, instrumentation, microwave Output frequency up to 200 MHz Low jitter < 1 ps Wide frequency pulling range up to ±200 ppm Specification Parameter VXO-P9-3H-6p VXO-P9-5H-6p Frequency range 1.0 ~ 200 MHz Standard frequencies 13.00, 27.00, 32.768, 38.880 & 40.00 MHz Supply voltage +3.3 V ±5 % Supply current 10 ~ 50 mA +5.0 V ±5 % 6 ~ 25 mA < ±25 ppm < ±50 ppm Frequency stability (all inclusive) (*) Output signal over -20 ~ +70 °C over -40 ~ +85 °C HCMOS/TTL compatible Output voltage VOH ≥ 0.9 Vdc VOL ≤ 0.1 Vdc Output load 15 pF 25 pF ~ 50 pF on request Symmetry 45 ~ 55 % @ ½ Vdc Rise / Fall time 4 ~ 8 ns ±50 ~ ±200 ppm Frequency pulling range +1.65 V ±1.35 V Voltage control +2.5 V ±2.0 V open or high Î Enable / Disable function Pin #2 Jitter (rms) < 1 ps Operating temperature range -20 ~ +70 °C -40 ~ +85 °C commercial application industrial application Packaging units tape & reel 500 or 1’000 pieces (*) All inclusive pin #4 enable @ 12 kHz ~ 20 MHz from carrier frequency frequency stability vs. temperature, tolerance, aging, supply & load variation Customer specifications on request Pin function #1 #2 #3 #4 #5 #6 Example for solder pattern Vc Voltage control E/D or not connected GND Output not connected or E/D Vdc Do not design any conductive path between the pattern Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 07 Jun. 10