[Table of control terminal functions] External ommand皿ode 且 al c Termi (operation No. E de 0 ) 。 TPl 工nternal com 皿and皿ode (operation 田o de 1 ) Trip output (emitter) TP2 4-speed operation mode (operation 田o de 2 ) ＋ ＋ Trip output (collector) ＋ ＋ 1 DC 5 V ＋ ＋ 2 Frequency 工nvalid settinαinout 3 Controlling ground 4 合 1 + Frequency meter outpu七 ＋ 4戸 5 Normal rotation ＋ 毛 ー 6 Controlling ground ＋ ＋ 7 Reverse rota七ion ＋ ＋ 8 Jog 3 ＋ 9 Free-run *2 stop 会 工 − 3 4 on JOG and turning on normal or reverse rotation, started. The JOg command can be accepted during − M *4 合 qs 合 Stopped if both a ? OFF or ON. But reset if both are ON for田ore than 0.1 sec when tripping. Trip reset is not effected. B 2 。七0 +5 v 工nternal VR is the f 司e ncycommand dial. reqi nLn Lo ・1 nαd r n十 U a tq −r 句戸 y3 ・ 0 安 4-speed selec七ion + Open collector output DC 24 V 50 m且 1st speed setting + 台 Remarks Terminal 1st speed No. 2nd speed 3rd speed 4th speed 8 OFF ON OFF ON 9 OFF OFF ON ON ｛ ” ON ” 皿eans to c onnect to terminal 6 .) - 12 -