SENSITRON SEMICONDUCTOR SHD319611 TECHNICAL DATA DATA SHEET 5147, Preliminary HERMETIC ULTRAFAST RECTIFIER DESCRIPTION: A 200-VOLT, 80 AMP, 50 NANOSECOND RECTIFIER IN A HERMETIC LCC-3P PACKAGE. FEATURES: • Soft Reverse Recovery to minimize snubbers / EMI issues • Low profile ceramic package for reduced inductance • Low forward drop • Available with JANTX, JANTXV, JANS equivalent screening MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25 C) UNLESS OTHERWISE SPECIFIED RATING SYMBOL MAX. UNITS PIV 200 Volts IO 80 Amps IFSM 250 Amps MAXIMUM THERMAL RESISTANCE RθJC 0.8 °C/W MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Top/stg -65 to +175 °C SYMBOL MAX. UNITS If = 5 Amps, TC = 25°C Vf1 0.75 If = 25 Amps, TC = 25°C Vf2 0.90 If = 50 Amps, TC = 25°C Vf3 1.05 If = 80 Amps, TC = 25°C Vf4 1.15 If = 50 Amps, TC = -55°C Vf5 1.15 If = 50 Amps, TC = 100°C Vf6 0.90 MAXIMUM REVERSE CURRENT Ir @ 200V, TC = 25°C Ir 50 μA MAXIMUM REVERSE CURRENT Ir @ 200V, TC = 100°C Ir 8 mA tRR 50 ns IRM 5 A PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM DC OUTPUT CURRENT (TC = 100 OC) PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP MAXIMUM REVERSE RECOVERY TIME V IF = 9.9A, dIF/dt = 200 A/µs, VR = 30V, TC = 25°C MAXIMUM REVERSE RECOVERY Current IF = 9.9A, dIF/dt = 200 A/µs, VR = 30V, TC = 25°C • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • SENSITRON SEMICONDUCTOR SHD319611 TECHNICAL DATA DATA SHEET 5147, Preliminary MECHANICAL DIMENSIONS: In Inches / mm .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) 3 .415 (10.54) .157 (3.99) .625 (15.88) 1 2 3 LCC-3P PINOUT TABLE DEVICE TYPE SINGLE RECTIFIER PIN 1 CATHODE PIN 2 ANODE PIN 3 ANODE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •