Real-time clocks for automotive applications

NXP RTC
PCA85063
PCA8565
PCA21125
PCA2129
Cortex-M0
MCUsfor
with
lowest active
Real-time clocks
automotive
power
and superior code density
applications
In automotive applications, exposure to extreme temperatures presents a serious
challenge to accurate timing. NXP has the solution.
PCA85063A NEW
} -40 to +105 °C
} Interface: I2C-bus, 400 kHz
} Low power consumption < 300 nA
} For dashboards and infotainment systems
} For accurate and consistent timing
PCA21125
} -40 to +125 °C
} SPI-bus, 6 MHz
} For battery management
} For engine and motor control
} For critical applications
PCA8565
} -40 to +125 °C
} Interface: I2C-bus, 400 kHz
} For battery management
} For engine and motor control
} For critical applications
PCA2129
} -40 to +125 °C
} I²C-bus, 400 kHz & SPI-bus, 6.5 MHz
} For dashboards and infotainment systems
} High timing accuracy via temperature-compensated oscillator
} All clocks are exact and synchronous
Application
Dasboard /
PCA85063
PCA8565
PCA21125
PCA2129T
Ideal fit
Good fit
Good fit
Ideal fit
Good fit
Ideal fit
Ideal fit
Good fit
System timing
Ideal fit
Ideal fit
Ideal fit
Ideal fit
Accurate time distribution
Good fit
-40 to +105 °C
-40 to +125 °C
-40 to +125 °C
-40 to +85 °C
2
1
1
3
infotainment
Battery charging
Temperature range
AEC-Q100 grade
Ideal fit
PCA2129 block diagram
Our real-time clocks (RTCs) offer superior performance in
critical automotive applications
} Consistent timing
} Independent timer
} Independent watchdog function for system supervision
} Periodic interrupts to initiate processes
} Alarm function with interrupt
} Complete date and time from seconds to years
} Time-stamping events, independent of microcontroller
} Timing under severe conditions, e.g. up to +125 °C
} Electric tuning, with no external capacitors needed for
PCA85063 and PCA2129
} Highly accurate and uninterrupted time tracking using
temperature-compensated quartz oscillator and battery
backup system
} Oscillator optimized for quartz crystals in automotive-grade
ceramic package
} Interfaces to I2C and/or SPI bus
OM13513 evaluation board for PCA2129T
OM13515 evaluation board for PCA85063
Automotive RTC selection guide
Product number
PCA85063AT
PCA8565TS
PCA21125TS
PCA2129T
I C-bus
I C-bus
SPI
SPI, I²C-bus
-40 to +105 °C
-40 to +125 °C
-40 to +125 °C
-40 to +85 °C
Special feature
Low power
Very wide temperature range
Very wide temperature range
High timing accuracy
Demo board*
OM13515
User manual
UM10788
Interface
Temperature range
Package
2
TSSOP8
2
OM13513
UM10762
TSSOP8
TSSOP14
SO161
* The I²C-bus demo boards are supported by the I²C-bus USB dongle OM13518 (User Manual UM10789)
www.nxp.com
© 2015 NXP Semiconductors N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
Date of release: May 2015
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable
Document order number : 9397 750 17665
and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication
Printed in the Netherlands
thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.