Product Brief Infineon Bridge Rectifier Key Features: Schottky Diode rectifier with fast switching speed and low voltage drop for high energy efficiency rectifiers Very small systems Full bridge and Half bridge combinations available Suitable also for advanced reverse polarity protection E N E R G Y E F F I C I E N T circuit design could have these days crucial significance for the success of a product. Since decades bridge rectifier is the state of the art for circuit for all DC Power supply. A bridge rectifier makes use of four diodes in a bridge arrangement to achieve full-wave rectification. The energy efficiency of a rectifier is determined by the forward voltage drop and the switching speed of the diodes. Rectifiers build by Schottky have such a very low forward voltage drop and switching speeds that approach zero time. This makes them ideal for energy efficient output stages of switching power supplies. Target Applications: Rectifier for LED illumination Energy saving Lamps Mobil Battery charger (Mobil-Phones, Digital-Cameras, PDAs) Toys The full bridge rectifier is coming in the tiny SOT143 . Type Product Package Configuration VR (V) max VRrms (V) max IF (mA) max Schottky bridge rectifier BAS3007A-RPP SOT143 Full Bridge 30 21 900 BAS4002A-RPP SOT143 Full Bridge 40 28 200 BAT240A SOT23 Half Bridge 240 170 400 BGX50A SOT143 Full Bridge 70 50 140 PN diode bridge rectifier www. i n f i n e o n .co m / sch o t t kyd i o d es Small Signal Discretes Product Brief Save space by replacing four diodes by a single pack full bridge rectifier PIN Configuration in SOT143 3 4 D3 D4 D2 D1 1 Full Bridge Rectifier 2 Application example BAT 240A Energy efficient bridge rectification for 110V / 60Hz power lines Application Example BAT24DA - 3 3 D2 ~ ~ 1 DC output D1 D1 D2 2 AC input How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. 1 2 + Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Published by Infineon Technologies AG Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B132-H9187-X-X-7600x