DB101 THRU DB107 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 40 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram DB-1 MECHANICAL DATA .255 (6.5) * Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233. .245 (6.2) .350 (8.9) .300 (7.6) .335 (8.8) .320 (7.8) .135 (3.4) .115 (2.9) .165 (4.2) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .020 (0.5) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .155 (3.9) .060 (1.5) .205 (5.2) .195 (5.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) SYMBOL DB101 DB102 DB103 DB104 DB105 DB106 DB107 UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Output Current at T A = 40 oC Volts IO 1.0 Amps I FSM 40 Amps I2t 6.6 A2/Sec Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Current Squarad Time R qJA 40 RqJL 15 T J, T STG -55 to + 150 0 Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range C/W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC Maximum Reverse Current at Rated @T A = 25 o C DC Blocking Voltage per element @T A = 125 o C IR Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: PCB mounted. 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. DB101 DB102 DB103 DB104 DB105 DB106 DB107 UNITS 1.1 Volts 5.0 mAmps 0.5 mAmps 2011-04 REV:B 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 0 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( DB101 THRU DB107 ) 10 1 0.1 0.01 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 1000 FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.5 TA = 125 OC 100 10 TA = 25 OC 1.0 0 20 40 60 80 100 0.5 1.0 1.5 2.0 2.5 INSTANTANEOUS FORWARD VOLTAGE, (V) AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE THE MARKING OF DB10X Marking Description : Part No. DB10X Year Code Week Code V Y W W Marking Description Part No. + DB10X Rectron Logo Voltage-code ~ V Y W W~ Year – code (Y:Last digit of year) Week – code (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-----1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE EA PER CARTON WEIGHT(Kg) DB-1 -C 2,500 450*140*84 464*305*283 15,000 14.30 (mm) (mm) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.