RECTRON BAT54AW SEMICONDUCTOR TECHNICAL SPECIFICATION SOT-323 SURFACE MOUNT SCHOTTKY BARRIER DIODE FEATURES * Low forward voltage drop * Fast switching * Uitra - small surface mount package * PN Junction guard ring for transient and ESD protection Marking: KL6 SOT-323 0.053(1.35) 0.045(1.15) MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.006 gram 0.006(0.15) 0.003(0.08) 0.043(1.10) 0.035(0.90) REF 0.021(0.53) 0.016(0.40) 0.004(0.10) 0.000(0.00) 0.096(2.45) 0.085(2.15) 0.008(0.20) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.055(1.40) 0.047(1.20) 0.087(2.20) 0.079(2.00) Ratings at 25 o C ambient temperature unless otherwise specified. Dimensions in inches and (millimeters) o MAXIMUM RATINGS ( @ TA = 25 C unless otherwise noted ) SYMBOL VALUE Peak repetitive reverse voltage CHARACTERISTICS VRRM 30 working peak reverse voltage VRWM 30 VR 30 DC blocking voltage IF 200 µA 300 µA IFSM 600 µA PD 200 µW RθJA 625 Κ/Ω Tj, Tstg -65~+125 Repetitive peak forward current (Note 1) @ t < 1.0 s Power dissipation (Note 1) Thermal resistance, Junction to ambient air (Note 1) Operating and storage temperature range V IFRM Forward contiunous current (Note 1) Forward surge current (Note 1) UNITS o C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) SYMBOL MIN TYP MAX UNITS V(BR)R 30 - - V (IF= 0.1mA) - - 240 (IF= 1mA) - - 320 (IF= 10mA) - - 400 (IF= 30mA) - - 500 (IF= 100mA) - - 1000 IR - - 2.0 µA Junction capacitance (VR= 1.0V, f= 1.0MHz) Cj - - 10 PF Reveres recovery time (IF=10mA through IR=10mA to IR=1.0mA,RL=100Ω) trr - - 5.0 CHARACTERISTICS Reveres breakdown voltage (IRS= 100µA) Forward voltage (Note 2) Reverse leakage current (VR= 25V) (Note 2) Notes: 1. Valid provided that terminals are kept at ambient temperature. 2. tp <300µs, duty cycle <2%. DS30065 Rev. 2P-1 VF mV ns 2006-3 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON