LT5400 - Quad Matched Resistor Network

LT5400
Quad Matched
Resistor Network
Features
Description
Excellent Matching
n A-Grade: 0.01% Matching
n B-Grade: 0.025% Matching
n0.2ppm/°C Matching Temperature Drift
n±75V Operating Voltage (±80V Abs Max)
n8ppm/°C Absolute Resistor Value Temperature Drift
n Long-Term Stability: <2ppm at 2000 Hrs
n–55°C to 150°C Operating Temperature
n8-Lead MSOP Package
The LT®5400 is a quad resistor network with excellent
matching specifications over the entire temperature range.
Matching is also specified when the LT5400 is configured
in a difference amplifier. This enhanced matching specification guarantees CMRR performance to be up to 2× better
than independently matched resistors.
n
All four resistors can be accessed and biased independently,
making the LT5400 a convenient and versatile choice for
any application that can benefit from matched resistors.
These resistor networks provide precise ratiometric stability
required in highly accurate difference amplifiers, voltage
references and bridge circuits.
Applications
Difference Amplifier
Reference Divider
n Precision Summing /Subtracting
n
The LT5400 is available in a space-saving 8-pin MSOP
package, and is specified over the temperature range of
–55°C to 150°C.
n
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
Typical Application
Difference Amplifier
Distribution of Matching Drift
30
4.7pF
1
INPUTS
REF
–
2
+
3
4
LT5400-4 R1
R2
R3
R4
8
7
6
5
–
LT1468
+
LT5400-4
CMRR > 80dB AT 200kHz
THD < –120dB AT 1kHz, 20VP-P
4.7pF
5400 TA01a
RELATIVE OCCURRENCE
25
20
15
10
5
0
–1 –0.8–0.6–0.4–0.2 0 0.2 0.4 0.6 0.8 1
ppm/°C
5400 G01
5400fc
For more information www.linear.com/LT5400
1
LT5400
Absolute Maximum Ratings
(Note 1)
Pin Configuration
Total Voltage (Across Any 2 Pins) (Note 2).……….±80V
Power Dissipation (Each Resistor) (Note 3)........ 800mW
Operating Temperature Range (Note 4)
LT5400C............................................... –40°C to 85°C
LT5400I................................................ –40°C to 85°C
LT5400H............................................. –40°C to 125°C
LT5400MP.......................................... –55°C to 150°C
Specified Temperature Range (Note 4)
LT5400C................................................... 0°C to 70°C
LT5400I................................................ –40°C to 85°C
LT5400H............................................. –40°C to 125°C
LT5400MP.......................................... –55°C to 150°C
Maximum Junction Temperature ........................... 150°C
Storage Temperature Range.................... –65°C to 150°C
TOP VIEW
1
2
3
4
R1
R2
R3
R4
8
7
6
5
MS8E PACKAGE
8-LEAD PLASTIC MSOP
θJA = 40°C/W, θJC = 10°C/W
EXPOSED PAD (PIN 9) IS FLOATING
Available Options
PART NUMBER
R2 = R3 (Ω)
R1 = R4 (Ω)
RESISTOR RATIO
LT5400-1
10k
10k
1:1
LT5400-2
100k
100k
1:1
LT5400-3
10k
100k
1:10
LT5400-4
1k
1k
1:1
LT5400-5
1M
1M
1:1
LT5400-6
1k
5k
1:5
LT5400-7
1.25k
5k
1:4
LT5400-8
1k
9k
1:9
Order Information
LEAD FREE FINISH
TAPE AND REEL
PART MARKING*
PACKAGE DESCRIPTION
SPECIFIED TEMPERATURE RANGE
LT5400ACMS8E-1#PBF
LT5400ACMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
0°C to 70°C
LT5400BCMS8E-1#PBF
LT5400BCMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
0°C to 70°C
LT5400AIMS8E-1#PBF
LT5400AIMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BIMS8E-1#PBF
LT5400BIMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
–40°C to 85°C
LT5400AHMS8E-1#PBF
LT5400AHMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BHMS8E-1#PBF
LT5400BHMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-1#PBF
LT5400BMPMS8E-1#TRPBF
LTFVR
8-Lead Plastic MSOP
–55°C to 150°C
2
5400fc
For more information www.linear.com/LT5400
LT5400
Order Information
LT5400ACMS8E-2#PBF
LT5400ACMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
0°C to 70°C
LT5400BCMS8E-2#PBF
LT5400BCMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
0°C to 70°C
LT5400AIMS8E-2#PBF
LT5400AIMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BIMS8E-2#PBF
LT5400BIMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
–40°C to 85°C
LT5400AHMS8E-2#PBF
LT5400AHMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BHMS8E-2#PBF
LT5400BHMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-2#PBF
LT5400BMPMS8E-2#TRPBF
LTGBG
8-Lead Plastic MSOP
–55°C to 150°C
LT5400ACMS8E-3#PBF
LT5400ACMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
0°C to 70°C
LT5400BCMS8E-3#PBF
LT5400BCMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
0°C to 70°C
LT5400AIMS8E-3#PBF
LT5400AIMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BIMS8E-3#PBF
LT5400BIMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
–40°C to 85°C
LT5400AHMS8E-3#PBF
LT5400AHMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BHMS8E-3#PBF
LT5400BHMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-3#PBF
LT5400BMPMS8E-3#TRPBF
LTGBH
8-Lead Plastic MSOP
–55°C to 150°C
LT5400ACMS8E-4#PBF
LT5400ACMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
0°C to 70°C
LT5400BCMS8E-4#PBF
LT5400BCMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
0°C to 70°C
LT5400AIMS8E-4#PBF
LT5400AIMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BIMS8E-4#PBF
LT5400BIMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
–40°C to 85°C
LT5400AHMS8E-4#PBF
LT5400AHMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BHMS8E-4#PBF
LT5400BHMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-4#PBF
LT5400BMPMS8E-4#TRPBF
LTGCF
8-Lead Plastic MSOP
–55°C to 150°C
LT5400ACMS8E-5#PBF
LT5400ACMS8E-5#TRPBF
LTGCG
8-Lead Plastic MSOP
0°C to 70°C
LT5400BCMS8E-5#PBF
LT5400BCMS8E-5#TRPBF
LTGCG
8-Lead Plastic MSOP
0°C to 70°C
LT5400AIMS8E-5#PBF
LT5400AIMS8E-5#TRPBF
LTGCG
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BIMS8E-5#PBF
LT5400BIMS8E-5#TRPBF
LTGCG
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BCMS8E-6#PBF
LT5400BCMS8E-6#TRPBF
LTGCK
8-Lead Plastic MSOP
0°C to 70°C
LT5400BIMS8E-6#PBF
LT5400BIMS8E-6#TRPBF
LTGCK
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BHMS8E-6#PBF
LT5400BHMS8E-6#TRPBF
LTGCK
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-6#PBF
LT5400BMPMS8E-6#TRPBF
LTGCK
8-Lead Plastic MSOP
–55°C to 150°C
LT5400BCMS8E-7#PBF
LT5400BCMS8E-7#TRPBF
LTGFT
8-Lead Plastic MSOP
0°C to 70°C
LT5400BIMS8E-7#PBF
LT5400BIMS8E-7#TRPBF
LTGFT
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BHMS8E-7#PBF
LT5400BHMS8E-7#TRPBF
LTGFT
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-7#PBF
LT5400BMPMS8E-7#TRPBF
LTGFT
8-Lead Plastic MSOP
–55°C to 150°C
LT5400BCMS8E-8#PBF
LT5400BCMS8E-8#TRPBF
LTGTB
8-Lead Plastic MSOP
0°C to 70°C
LT5400BIMS8E-8#PBF
LT5400BIMS8E-8#TRPBF
LTGTB
8-Lead Plastic MSOP
–40°C to 85°C
LT5400BHMS8E-8#PBF
LT5400BHMS8E-8#TRPBF
LTGTB
8-Lead Plastic MSOP
–40°C to 125°C
LT5400BMPMS8E-8#PBF
LT5400BMPMS8E-8#TRPBF
LTGTB
8-Lead Plastic MSOP
–55°C to 150°C
Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
Consult LTC Marketing for information on non-standard lead based finish parts.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/
5400fc
For more information www.linear.com/LT5400
3
LT5400
Electrical
Characteristics
The l denotes the specifications which apply over the full specified
temperature range, otherwise specifications are at TA = 25°C.
SYMBOL
PARAMETER
∆R/R
Resistor Matching Ratio (Any Resistor to Any Other A-Grade
Resistor)
TA = 0°C to 70°C
TA = –40°C to 85°C
TA = –40°C to 125°C
CONDITIONS
(∆R/R)CMRR Matching for CMRR
(∆R/R)/∆T
Resistor Matching Ratio Temperature Drift
MIN
∆R/∆T
UNITS
l
l
l
%
%
%
%
B-Grade
l
±0.025
%
A-Grade (Note 6)
l
±0.005
%
B-Grade (Note 6)
l
(Note 5)
l
±0.2
l
<0.1
±0.015
±1
%
ppm/°C
ppm/V
Excess Current Noise
Mil-Std-202 Method 308
Absolute Resistor Tolerance
A-Grade
l
±7.5
%
B-Grade
l
±15
%
<–55
dB
Distributed Capacitance
Resistor to Exposed Pad
Resistor to Resistor
Absolute Resistor Value Temperature Drift
(Note 5)
Resistor Matching Ratio Long-Term Drift
35°C 2000Hours, 10mW
70°C 2000Hours, 10mW
<2
<4
ppm
ppm
Resistor Matching Ratio Moisture Resistance
85°C 85%R.H. 168Hours
<2
ppm
Resistor Matching Ratio Thermal Shock/Hysteresis
–50°C to 150°C, 5 Cycles
<3
ppm
Resistor Matching Ratio IR Reflow
25°C to 260°C, 3 Cycles
<3
ppm
Resistor Matching Ratio Accelerated Shelf Life
150°C, 1000Hours
10
ppm
Harmonic Distortion
20VP-P, 1kHz, Difference Amplifier
–120
dBc
Shelf Life
25°C, Unbiased, 1 Year
±5
ppm
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: The instantaneous difference between the highest voltage applied
to any pin and the lowest voltage applied to any other pin should not
exceed the Absolute Maximum Rating. This includes the voltage across
any resistor, the voltage across any pin with respect to the exposed pad of
the package, and the voltage across any two unrelated pins.
Note 3: In order to keep the junction temperature within the Absolute
Maximum Rating, maximum power dissipation should be derated at
elevated ambient temperatures.
Note 4: The LT5400C is guaranteed functional over the operating
temperature range of –40°C to 85°C. The LT5400C is designed,
characterized and expected to meet specified performance from –40°C to
85°C but is not tested or QA sampled at these temperatures. The LT5400I
is guaranteed to meet specified performance from –40°C to 85°C. The
LT5400H is guaranteed to meet specified performance from –40°C to
125°C and is 100% tested at these temperature extremes. The LT5400MP
is guaranteed to meet specified performance from –55°C to 150°C and is
100% tested at these temperature extremes.
4
MAX
±0.010
±0.010
±0.0125
±0.0125
Resistor Voltage Coefficient
∆R
TYP
5.5
1.4
l
–10
8
pF
pF
25
ppm/°C
Note 5: This parameter is not 100% tested.
Note 6: (∆R/R)CMRR (Matching for CMRR) is a metric for the contribution
of error from the LT5400 when used in a difference configuration using
the specific resistor pairs of R1/R2 and R4/R3. See Difference Amplifier,
Instrumentation Amplifier, and Differential Amplifier circuits in the Typical
Applications section for examples.
( ΔR/R) CMRR =
1 ⎛ R2 R3 ⎞ ⎛ R1⎞
•⎜ – ⎟ •⎜ ⎟
2 ⎝ R1 R4 ⎠ ⎝ R2 ⎠
The resistor contribution to CMRR can then be calculated in the following
way:
R2 ⎞
⎛
4•
⎜
R1 ⎟
CMRR = ( ΔR/R) CMRR • ⎜
R2 R3 ⎟
⎜⎝ 2+ + ⎟⎠
R1 R4
For LT5400 options with resistor ratio 1:1, the resistor contribution to
CMRR can be simplified:
CMRR ≈ (∆R/R)CMRR
5400fc
For more information www.linear.com/LT5400
LT5400
Typical Performance Characteristics
Distribution of Matching Drift
Change in Matching vs Time
5
CHANGE IN RESISTOR MATCHING (ppm)
30
RELATIVE OCCURRENCE
25
20
15
10
5
0
–1 –0.8–0.6–0.4–0.2 0 0.2 0.4 0.6 0.8 1
ppm/°C
4
3
2
1
0
–1
–2
–3
–4
–5
0
5400 G01
400
800
1200
TIME (HOURS)
1600
2000
5400 G02
5400fc
For more information www.linear.com/LT5400
5
LT5400
Applications Information
Where to Connect the Exposed Pad
The exposed pad is not DC connected to any resistor
terminal. Its main purpose is to reduce the internal temperature rise when the application calls for large amounts
of dissipated power in the resistors. The exposed pad can
be tied to any voltage (such as ground) as long as the
absolute maximum ratings are observed.
There is capacitive coupling between the resistors and the
exposed pad, as specified in the Electrical Characteristics
table. To avoid interference, do not tie the exposed pad to
noisy signals or noisy grounds.
Connecting the exposed pad to a quiet AC ground is
recommended as it acts as an AC shield and reduces the
amount of resistor-resistor capacitance.
Thermal Considerations
Each resistor is rated for relatively high power dissipation,
as listed in the Absolute Maximum Ratings section of
this data sheet. To calculate the internal temperature rise
inside the package, add together the power dissipated in
all of the resistors, and multiply by the thermal resistance
coefficient of the package (θJA or θJC as applicable).
For example, if each resistor dissipates 250mW, for a
total of 1W, the total temperature rise inside the package
equals 40°C. All 4 resistors will be at the same temperature,
regardless of which resistor dissipates more power. The
junction temperature must be kept within the Absolute
Maximum Rating. At elevated ambient temperatures, this
places a limit on the maximum power dissipation.
In addition to limiting the maximum power dissipation,
the maximum voltage across any two pins must also be
kept less than the absolute maximum rating.
ESD
The LT5400 can withstand up to ±1kV of electrostatic
discharge (ESD, human body). To achieve the highest
precision matching, the LT5400 is designed without explicit
ESD internal protection diodes. ESD beyond this voltage
can damage or degrade the device including causing
pin-to-pin shorts.
6
To protect the LT5400 against large ESD strikes, external
protection can be added using diodes to the circuit supply
rails or bidirectional Zeners to ground (Figure 1).
V–
V+
BAV99
LT5400
EXTERNAL
CONNECTOR
LT5400
EXTERNAL
CONNECTOR
UMZ36K
5400 F01
Figure 1
Matching Specification
The LT5400 specifies matching in the most conservative
possible way. In each device, the ratio error of the largest
of the four resistors to the smallest of the four resistors
meets the specified matching level. Looser definitions
would compare each resistor value to the average of the
resistor values, which would typically result in specifications that appear twice as good as they are per the LT5400’s
more conservative definition. The following two examples
illustrate this point.
In an inverting gain-of-1 amplifier, if the largest resistor
is allowed to deviate only 0.01% from the smallest resistor, then the worst-case gain can be –1.00005/0.99995 =
–1.0001, which is a 0.01% error from the ideal –1.0000.
That is the LT5400 definition. In a looser definition, if each
resistor would be allowed to deviate by 0.01% from the
average, then the worst-case gain could be –1.0001/0.9999
= –1.0002, which is a 0.02% error from the ideal –1.0000.
In a divide-by-2 resistor divider network, if the largest
resistor is allowed to deviate only 0.01% from the smallest
resistor, then the worst-case ratio can be 1.00005/(1.00005
+ 0.99995) = 0.500025, which is a 0.005% error from the
ideal 0.50000. That is the LT5400 definition. In a looser
definition, if each resistor would be allowed to deviate by
0.01% from the average, then the worst-case ratio could
be 1.0001/(1.0001 + 0.9999) = 0.50005, which is a 0.01%
error from the ideal 0.50000.
5400fc
For more information www.linear.com/LT5400
LT5400
Typical Applications
Difference Amplifier
4.7pF
1
INPUTS
–
2
+
3
4
REF
LT5400-4 R1
R2
R3
R4
8
7
6
5
–
LT1468
+
LT5400-4
CMRR > 80dB AT 200kHz
THD < –120dB AT 1kHz, 20VP-P
4.7pF
5400 TA02
Low Noise Reference Divider with Op Amp Input Bias Current Balancing
1
2
5V
LTC®6655-4.096
4.096V
2.7µF
3
4
LT5400-4 R1
R2
R3
R4
8
7
6
5
5V
–
LT6200
+
2.048V
10µF
5400 TA03
Micropower Reference Divide-by-4
VIN
5.5V TO 36V
LT6654-5
5V
1µF
1
2
3
4
LT5400-2 R1
R2
R3
R4
8
VIN
7
6
+
1.25V
LT1638
5
1µF
–
5400 TA04
5400fc
For more information www.linear.com/LT5400
7
LT5400
Typical Applications
Gain of 5, Fully-Differential Amplifier
LT5400-6 R1
1
IN–
2
IN+
3
R2
R3
R4
4
5V
8
7
6
–
+
LTC6362
OUTPUT
–
+
5
5400 TA05
CMRRTYPICAL = 95.6dB
CMRRWORST-CASE ≈ 69.55dB
THE WORST-CASE VALUE IS GUARANTEED OVER OPERATING TEMPERATUE RANGE
Gain of 10, 106dB CMRR, Discrete Component,
Fully-Differential Instrumentation Amplifier
+
VIN–
1/2
LT6011
–
1
LT5400-3
–
2
3
4
R1
R2
R3
R4
+
8
1
7
2
5V
LT5400-4 R1
3
6
4
5
–
+
R2
R3
R4
5V
8
– +
7
6
C2, 0.1µF
VOCM
+ –
LTC6362
S
5
5400 TA06
1/2
LT6011
VIN+
8
+
–
THE LT5400-3 COULD BE REPLACED BY 1% (OR BETTER) DISCRETE
RESISTORS AT THE COST OF SOME CMRR. THE INPUT STAGE IS LESS
SENSITIVE TO RESISTOR ERRORS THAN THE UNITY GAIN STAGE.
5400fc
For more information www.linear.com/LT5400
LT5400
Typical Applications
Low Offset Current-Sense Amplifier
25V
5V
RD*
10Ω
RSENSE
10Ω
+
LT5400-3
1
2
3
4
R1
R2
R3
R4
+
LTC2053
8
+
7
VOUT
–
6
5
VOUT = ILOAD • 10k/150
REF
–
–ILOAD
E
R6
10k
C1
0.1µF
R7
150Ω
5400 TA07
* –1% VISHAY CRCW1206
AS LONG AS RD–RSENSE << R1 – R4, THE COMMON MODE REJECTION
WILL NOT BE DETERIORATED BY THE SENSE RESISTOR.
5400fc
For more information www.linear.com/LT5400
9
LT5400
Package Description
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
MS8E Package
8-Lead Plastic MSOP, Exposed Die Pad
(Reference LTC DWG # 05-08-1662 Rev I)
BOTTOM VIEW OF
EXPOSED PAD OPTION
1.88
(.074)
1
1.88 ± 0.102
(.074 ± .004)
0.29
REF
1.68
(.066)
0.889 ± 0.127
(.035 ± .005)
0.05 REF
5.23
(.206)
MIN
DETAIL “B”
CORNER TAIL IS PART OF
DETAIL “B” THE LEADFRAME FEATURE.
FOR REFERENCE ONLY
NO MEASUREMENT PURPOSE
1.68 ± 0.102 3.20 – 3.45
(.066 ± .004) (.126 – .136)
8
3.00 ± 0.102
(.118 ± .004)
(NOTE 3)
0.65
(.0256)
BSC
0.42 ± 0.038
(.0165 ± .0015)
TYP
8
7 6 5
0.52
(.0205)
REF
RECOMMENDED SOLDER PAD LAYOUT
0.254
(.010)
3.00 ± 0.102
(.118 ± .004)
(NOTE 4)
4.90 ± 0.152
(.193 ± .006)
DETAIL “A”
0° – 6° TYP
GAUGE PLANE
0.53 ± 0.152
(.021 ± .006)
DETAIL “A”
1
2 3
4
1.10
(.043)
MAX
0.86
(.034)
REF
0.18
(.007)
SEATING
PLANE
0.22 – 0.38
(.009 – .015)
TYP
0.65
(.0256)
BSC
0.1016 ± 0.0508
(.004 ± .002)
MSOP (MS8E) 0910 REV I
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
6. EXPOSED PAD DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH ON E-PAD
SHALL NOT EXCEED 0.254mm (.010") PER SIDE.
10
5400fc
For more information www.linear.com/LT5400
LT5400
Revision History
REV
DATE
DESCRIPTION
PAGE NUMBER
A
8/11
Added LT5400-4, LT5400-5, LT5400-6. Changes reflected throughout the data sheet.
1-10
B
7/12
Added LT5400-3 H-grade and MP-grade and LT5400-7.
2, 3
Added Shelf Life characteristics.
Clarified Note 6.
C
02/15
4
4
Added application schematics.
8, 9
Added 5400-8
2, 3
5400fc
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection
of its circuits
as described
herein will not infringe on existing patent rights.
For more
information
www.linear.com/LT5400
11
LT5400
Typical Application
Precision Single-Ended to Differential Conversion
1
LT5400-4 R1
2
IN+
3
4
R2
R3
R4
8
7
6
–
LTC6362
+
+
OUTPUT
–
5
5400 TA08
THD = –110dB AT 1kHz, 8VP-P
GROUNDING EXPOSED PAD RESULTS IN STABLE,
NO OVERSHOOT RESPONSE
Related Parts
PART NUMBER
DESCRIPTION
COMMENTS
LT1991
Precision Difference Amplifier
0.04% Resistor Matching,100µA Op Amp
LT1990
High Voltage Difference Amplifier
±250V Input Range
LT1167
Instrumentation Amplifier
>90dB CMRR
12 Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
For more information www.linear.com/LT5400
(408) 432-1900 ● FAX: (408) 434-0507
●
www.linear.com/LT5400
5400fc
LT 0215 REV C • PRINTED IN USA
 LINEAR TECHNOLOGY CORPORATION 2011