TG2015-9 – ABS and Polycarbonate – 202 x 152 x 90 mm (7.95 x 5.98 x 3.54 in.) Standard Features • Protection Level: • Technical: IP67 (NEMA 4X) Smooth Sidewalls Gray or Transparent Cover Standard or Quick Turn Screws 175 x 125 x 0.4 mm Recess in Cover Integrated Cover Retainer • UL Recognized Enclosure Materials: ABS or Polycarbonate • Transparent Cover Material: Polycarbonate Polyurethane Light Gray • Gasket Material: • Color: • Material Temperature Range: • Accessories: ABS -40˚C to 80˚C (-40˚F to 176˚F) Polycarbonate -40˚C to 120˚C (-40˚F to 248˚F) See section below E254144 Polycarbonate with standard screws Only TG Ordering Information Cat. No. w/ Standard Screws Cat. No. w/ Quick Turn Screws Type Length Dimensions mm (in) Width 100-409-91 101-009-91 100-409-01 101-009-01 TGABS2015-9-o TGABS2015-9-to 202 mm (7.95 in.) 202 mm (7.95 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 1 1 200-409-91 201-009-91 200-409-01 201-009-01 TGPC2015-9-o TGPC2015-9-to 202 mm (7.95 in.) 202 mm (7.95 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 152 mm (5.98 in.) 90 mm (3.54 in.) 1 1 Height Std. Pk. ABS Gray cover Transparent cover Polycarbonate Gray cover Transparent cover Accessories Ordering Information Cat. No. Type Std. Pk. Mounting Plate (plastic) 186-009 TGMPI-2015 1 Mounting Plate (steel) 187-009 TGMPS-2015 1 DIN Rail – TS35-170 198-170 NS35-170 1 DIN Rail - TS15-170 197-170 TS15-170 1 Internal Hinge Kit Set 182-001 TGISS 1 Mounting Tab Kit 182-002 TGABL 1 Please refer to pages 149-152 additional accessories and detailed information 202 mm (7.95 in) 195 mm (7.68 in) 2.94 mm 160 mm (6.30 in) 188 mm (7.40 in) n4.5 mm (0.18) 118 mm (4.65 in) 8.1 mm (0.32 in) 80 mm (3.15 in) 4 mm (0.02 in) 7 mm (0.28 in) 56 mm (2.20 in) 106 mm (4.17 in) 119 mm (4.69 in) 145 mm (5.71 in) 152 mm (5.98 in) 173 mm (6.81 in) 4 mm (0.16 in) 90 mm (3.54 in) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 59