Test Plugs 4 mm Retractable Plug System Type SLS 10 B SLS 20 B 4mm touch proof banana plug, sliding sleeve system, solder terminal max. 2.5mm2 leads. 4mm touch proof banana plug, sliding sleeve system, screw terminal max. 1.5mm2 leads. Pin diameter 4 mm (0.157”) 4 mm (0.157”) PART NO. / Housing color 931824100 931825100 931824101 931825101 931824102 931825102 931824103 931825103 931824104 931825104 931824107 931825107 Technical Data Contact Type spring loaded plug spring loaded plug Connection Type screw terminal max. 1.5mm2 Voltage Rating solder terminal max. 2.5mm2 30 VAC / 60 VDC Measurement Category (IEC61010) CAT I CAT I Current Rating* 30A 16A Contact Resistance 5 mOhm 5 mOhm 30 VAC / 60 VDC1 Material Specifications Plug nickel plated brass nickel plated brass Contact Spring nickel plated copper-beryllium nickel plated copper-beryllium Housing POM POM -25°C to +70°C (-13 to 158°F) -25°C to +70°C (-13 to 158°F) UL 94 HB UL 94 HB Environmental Conditions Temperature range Flamability Rating Housing ø 12 ø 10 ø 4,2 ø6 ø4 ø 4,2 ø 10 ø6 ø4 ø 12 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 20 20 67 67 * Please consider derating graph on page 80. 1For this two types up to DC 150 V, CAT II according IEC/EN 61010-31 item 6.4., comment 4 allowed for devices with not yet protected sockets. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 51