Measuring Leads 4 mm - Safety Plug System PL 2600 S PL 2600 S W Safety measuring lead with dual function safety test probe. Tip for penetration of insulation and oxide layers and 4 mm diameter pin for insertion into sockets. 4 mm diameter safety connector with straight outlet. Incl. Tip protection Safety measuring lead with dual function safety test probe. Tip for penetration of insulation and oxide layers and 4 mm diameter pin for insertion into sockets. 4 mm diameter safety connector with right-angled outlet. Incl. Tip protection Cable length 1.0m (39.4”) 1.0m (39.4”) Conductor size 1 mm2 (18 AWG) 1 mm2 (18 AWG) Type Cable material PVC PVC Pin dimensions 4 mm (0.157”) 4 mm (0.157”) Clamp type LEH-XY LEH-XY PART NO. / Housing color 934159100 934158100 934159101 934158101 934159102 Technical Data Contact Type spring-loaded pin, stationary tip spring-loaded pin, stationary tip Voltage Rating AC/DC 1000 V AC/DC 1000 V Measurement Category (IEC61010) CAT II CAT II Current Rating* Contact Resistance 16 A 20 mOhm 16 A 20 mOhm Material Specifications Contact Pin Contact Spring nickel plated brass nickel plated brass nickel plated copper-beryllium nickel plated copper-beryllium PA, PP PA, PP -15°C to +70°C (5°F to 158°F) -15°C to +70°C (5°F to 158°F) UL 94 HB UL 94 HB Griffbereich handling area 135 135 19 ø 8,8 ø4 ø 9,5 ø4 ø 9,5 ø 20 ø 20 19 Griffbereich handling area 66 L ø4 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 46,3 Housing Environmental Conditions Temperature Range Flamability Rating Housing ø4 L ø 8,8 * Please consider derating graph on page 80. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 37