Plunger Style Test Clips 4 mm Safety System KLEPS 2700 KLEPS 2800 Safety plunger style test probe with spring loaded stainless steel tip, for wires up to 3.5mm, no stripping necessary, 4mm brass socket. Safety plunger style test probe with wide opening alligator clip, for wires and areas with large cross sections, fits safety measurement leads. Clamping range Clamp type 3.5 mm (0.138”) spring-loaded stainless steel tip 10 mm (0.394”) alligator clips 5.5 mm (0.217”) contact hook PART NO. / Housing color 972307100 972307101 972308100 972308101 972309100 972309101 Connection Type Voltage Rating Measurement Category (IEC61010) Current Rating* Contact Resistance Material Specifications socket Ø 4 mm AC/DC 1000 V CAT III 10 A 100 mOhm socket Ø 4 mm AC/DC 1000 V CAT III 20 A 100 mOhm socket Ø 4 mm AC/DC 1000 V CAT III 20 A 50 mOhm Pincers/ hook Connection pin/ socket stainless steel nickel plated brass – PBT nickel plated spring steel nickel plated brass – PBT nickel plated brass nickel plated brass – PBT -25 °C to +80 °C (13°F to 176°F) -25 °C to +80 °C (13°F to 176°F) -25 °C to +80 °C (13°F to 176°F) UL 94 HB UL 94 HB UL 94 HB Type KLEPS 2900 Safety plunger style test probe with stationary contact hook, fits safety measurement leads. Technical Data Spring-loaded 5,5 Handle 41 36,5 >10 Handle 8,3 36,5 41 ø 10 Handle 35 ø 162 158 4 ø 4 ø 3,5 4 4,2 127,5 * Please consider derating graph on page 80. 10 For the latest on Altech Test & Measurement specifications please visit www.altechcorp.com/test-equipment 41 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 36,5 Contact Spring Housing Environmental Conditions Temperature Range Flamability Rating Housing