Click here for

Abox Series
The Abox family consists of six enclosures that
feature an attractive modern design and shape that
allow for optimum use of installation space. Each
enclosure has either membranes or knockouts on
each sidewall and on the backside.
Most enclosures in the family can maintain IP65
protection with the use of complementary IP65
cable glands. The dual membrane models are
IP65, without the addition of cable glands.
Two of the six enclosures in this family feature
"Dual Molding Technology". This feature
incorporates rubber membranes molded right into
the polystyrene body. This allows the user to
simply push wires through the membrane or cut
them out to install a cable gland. These access
holes can accommodate metric cable glands and
entry spouts.
•
•
•
Two to four high grade self taping screws
secure the lid
Tongue and groove sealing system with
polyurethane gasket
Made from non-flammable Polystyrene
Abox Enclosures are available in sizes ranging from
80 x 80 x 52 mm (3.15 x 3.15 x 2.05 in.) to 250 x
250 x 115 mm (9.84 x 9.84 x 4.53 in.).
90
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Metricmembranes
Enclosure seal
Metric-membranes
Metricbasemembrane
Covers for
mounting
screws
Metricmembranes
CONVENIENCE
AND RELIABILITY
Abox Enclosures are
manufactured in Polystyrene and
are approved by several
international test
agencies. The unique
design of MetricMembranes allows for
installation of large or small
cables, cable glands, conduits,
and entry spouts while
ensuring that the enclosure
remains sealed and all housed
components are protected.
High-Set Terminal
A MODERN TERMINAL
TECHNIQUE
With our new Abox Enclosures wiring
is as easy as 1-2-3. Large numbers of
cables from AWG 18 to AWG 2
depending on the enclosure size, can
be easily installed. The square shape
of the enclosure and the domed cover
provide ample room for even the
toughest wiring job.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
91
Abox 025 – Polystyrene – 80 x 80 mm (3.15 x 3.15 in.)
Standard Features
• Protection Level:
• Technical:
IP65
Self Sealing Soft Elastic Membranes
Suitable for Metric Entry
M20 - 2 to 16mm
• Sealing Area:
• UL Recognized
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Accessories:
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
See section below
Abox
Ordering
Information
Cat. No.
Color
Terminal
Enclosure with terminals
Enclosure with terminals
Enclosure - empty
Enclosure - empty
802-407
802-107
802-907
802-607
gray
white
gray
white
2.5 mm2 - 5 pole
2.5 mm2 - 5 pole
NA
NA
Cat. No.
Type
Length
Dimensions mm (in)
Width
Height
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
Std.
Pk.
52 mm (2.05 in)
52 mm (2.05 in)
52 mm (2.05 in)
52 mm (2.05 in)
3
3
3
3
Accessories
Ordering
Information
Std.
Pk.
Terminal (base mount)
840-004
2.5/4 mm2 - 5 pole 10
Please refer to pages 149-152 for additional accessories and detailed information.
80 mm (3.15 in)
52 mm (2.05 in)
80 mm (3.15 in)
Mount Holes
( 5 mm) at
the bottom
80 mm (3.15 in)
Knockout
Detail
46 mm (1.81 in)
M16
92
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Abox 025AB – Polystyrene – 80 x 80 mm (3.15 x 3.15 in.)
Standard Features
• Protection Level:
• Technical:
• Sealing Area:
• UL Recognized
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Accessories:
IP65
Self Sealing Soft Elastic Membranes
Suitable for Metric Entry
M20 - 2 to 16mm
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
See section below
Abox
Ordering
Information
Cat. No.
Color
Terminal
Enclosure with terminals
Enclosure with terminals
Enclosure - empty
Enclosure - empty
803-407
803-107
803-907
803-607
gray
white
gray
white
2.5 mm2 - 5 pole
2.5 mm2 - 5 pole
NA
NA
Cat. No.
Type
Length
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
Dimensions mm (in)
Width
Height
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
80 mm (3.15 in)
Std.
Pk.
52 mm (2.05 in)
52 mm (2.05 in)
52 mm (2.05 in)
52 mm (2.05 in)
3
3
3
3
Accessories
Ordering
Information
Std.
Pk.
Terminal (base mount)
840-004
2.5/4 mm2 - 5 pole 10
Please refer to pages 149-152 for additional accessories and detailed information.
80 mm (3.15 in)
52 mm (2.05 in)
80 mm (3.15 in)
Mount Holes
( 5 mm) at
the bottom
80 mm (3.15 in)
Knockout
Detail
46 mm (1.81 in)
M16
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
93
Abox 040 – Polystyrene – 93 x 93 mm (3.66 x 3.66 in.)
Standard Features
• Protection Level:
• Technical:
• Sealing Area:
• UL Recognized
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Accessories:
IP65
Self Sealing Soft Elastic Membranes
Suitable for Metric Entry
M20 - 2 to 16mm
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
See section below
Abox
Ordering
Information
Cat. No.
Color
Terminal
Enclosure with terminals
Enclosure with terminals
Enclosure - empty
Enclosure - empty
804-407
804-107
804-907
804-607
gray
white
gray
white
4 mm2 - 5 pole
4 mm2 - 5 pole
NA
NA
Length
Dimensions mm (in)
Width
Height
93 mm (3.66 in)
93 mm (3.66 in)
93 mm (3.66 in)
93 mm (3.66 in)
93 mm (3.66 in)
93 mm (3.66 in)
93 mm (3.66 in)
93 mm (3.66 in)
Std.
Pk.
55 mm (2.17 in)
55 mm (2.17 in)
55 mm (2.17 in)
55 mm (2.17 in)
3
3
3
3
Accessories
Ordering
Information
Cat. No.
Std.
Pk.
Type
Terminal (base mount)
840-004
2.5/4 mm2 - 5 pole 10
Please refer to pages 149-152 for additional accessories and detailed information.
93 mm (3.66 in)
55 mm (2.17 in)
93 mm (3.66 in)
Mount Holes
( 5 mm) at
the bottom
93 mm (3.66 in)
Knockout
Detail
59 mm (2.32 in)
M16
94
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Abox 060 – Polystyrene – 110 x 110 mm (4.33 x 4.33 in.)
Standard Features
• Protection Level:
• Technical:
• UL Recognized
IP54* / IP65**
Knockout Sidewalls
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Included Accessories:
• Accessories:
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
(4) M25 Entry Spouts for Cables 9-18mm
(1) M25 Sealing Plug
See section below
* With Supplied Entry Spouts
** As Equipped or With Optional IP65 Cable Glands
Abox
Ordering
Information
Cat. No.
Color
Terminal
Enclosure with terminals
Enclosure - empty
806-407
806-907
gray
gray
6 mm2 - 5 pole
NA
Cat. No.
Type
Length
Dimensions mm (in)
Width
Height
110 mm (4.33 in) 110 mm (4.33 in)
110 mm (4.33 in) 110 mm (4.33 in)
Std.
Pk.
67 mm (2.64 in)
67 mm (2.64 in)
2
2
Accessories
Ordering
Information
Std.
Pk.
Mounting Plate
895-006
MP060
1
DIN Rail TS 35 – 35x81 mm
198-081
TS 35/81
1
5
Terminal (high-set)
840-006
6 mm2 - 5 pole
Please refer to pages 149-152 for additional accessories and detailed information.
67 mm (2.64 in)
50 mm (1.97 in)
110 mm (4.33 in)
110 mm (4.33 in)
Mount Holes
( 5 mm) at
the bottom
110 mm (4.33 in)
Knockout
Detail
50 mm (1.97 in)
M16
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
95
Abox 100 – Polystyrene – 140 x 140 mm (5.51 x 5.51 in.)
Standard Features
• Protection Level:
• Technical:
• UL Recognized
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Included Accessories:
• Accessories:
IP54* / IP65**
Knockout Sidewalls
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
(4) M32 Entry Spouts for Cables 11-23mm
(1) M32 Sealing Plug
See section below
* With Supplied Entry Spouts
** As Equipped or With Optional IP65 Cable Glands
Abox
Ordering
Information.
Cat. No
Color
Terminal
Enclosure with terminals
Enclosure - empty
810-410
810-910
gray
gray
10 mm2-5 pole
NA
Cat. No.
Type
Dimensions mm (in)
Width
Height
Length
140 mm (5.51 in) 140 mm (5.51 in)
140 mm (5.51 in) 140 mm (5.51 in)
Std.
Pk.
79 mm (3.11 in)
79 mm (3.11 in)
Accessories
Ordering
Information
Std.
Pk.
Mounting Plate
895-010
MP100
1
DIN Rail TS 35 – 35x106 mm 198-106
TS 35/106
1
5
Terminal (high-set)
840-010
10 mm2 - 5 pole
Please refer to pages 149-152 for additional accessories and detailed information.
79 mm (3.11 in)
80 mm (3.15 in)
Mount Holes
( 5 mm) at
the bottom
140 mm (5.51 in)
80 mm (3.15 in)
Knockout
Detail
140 mm (5.51 in)
M16
96
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
2
2
Abox 160 – Polystyrene – 180 x 180mm (7.09 x 7.09 in.)
Standard Features
• Protection Level:
• Technical:
• UL Recognized
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Included Accessories:
• Accessories:
IP54* / IP65**
Knockout Sidewalls
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
(4) M40 Entry Spouts for Cables 17-30mm
(1) M40 Sealing Plug
(1) Tamper Kit
See section below
* With Supplied Entry Spouts
**As Equipped or With Optional IP65 Cable Glands
Abox
Ordering
Information
Cat. No.
Color
Terminal
Enclosure with terminals
Enclosure - empty
816-410
816-910
gray
gray
16/25 mm2-5 pole
NA
Cat. No.
Type
Length
Dimensions mm (in)
Width
Height
180 mm (7.09 in) 180 mm (7.09 in)
180 mm (7.09 in) 180 mm (7.09 in)
Std.
Pk.
91 mm (3.58 in)
91 mm (3.58 in)
1
1
Accessories
Ordering
Information
Std.
Pk.
Mounting Plate
895-016
MP160
1
DIN Rail TS 35 – 35x144 mm 894-016
TS 35/144
1
Terminal (high-set)
840-016
16/25mm2 - 5 pole 2
Please refer to pages 149-152 for additional accessories and detailed information.
91 mm (3.58 in)
120 mm (4.72 in)
180 mm (7.09 in)
Mount Holes
( 5 mm) at
the bottom
180 mm (7.09 in)
120 mm (4.72 in)
Knockout
Detail
180 mm (7.09 in)
M16
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
97
Abox 350 – Polystyrene – 250 x 250 mm (9.84 x 9.84 in.)
Standard Features
• Protection Level:
• Technical:
• UL Recognized
Enclosure Material:
• Gasket Material:
• Color:
• Material
Temperature Range:
• Included Accessories:
• Accessories:
IP54* / IP65**
Knockout Sidewalls
Polystyrene
Polyurethane
Light Gray or White
Polystyrene
-40˚C to 70˚C (-40˚F to 158˚F)
(4) M40 Entry Spouts for Cables 17-30mm
(1) M40 Sealing Plug
(1) Tamper Kit
See section below
* With Supplied Entry Spouts
**As Equipped or With Optional IP65 Cable Glands
Abox
Ordering
Information
Cat. No.
Color
Terminal
Enclosure with terminals
Enclosure - empty
835-410
835-910
gray
gray
35/25 mm2 - 5 pole
NA
Dimensions mm (in)
Width
Height
Length
250 mm (9.84 in) 250 mm (9.84 in)
250 mm (9.84 in) 250 mm (9.84 in)
Std.
Pk.
115 mm (4.53 in)
115 mm (4.53 in)
Accessories
Ordering
Information
Cat. No.
Std.
Pk.
Type
Mounting Plate
895-035
MP350
1
DIN Rail TS 35 – 35x216 mm
894-035
TS 35/216
1
Terminal (high-set)
840-035
35/25 mm2 - 5 pole 1
Please refer to pages 149-152 for additional accessories and detailed information.
115 mm (4.53 in)
250 mm (9.84 in)
184 mm (7.24 in)
Mount Holes
( 5 mm) at
the bottom
250 mm (9.84 in)
184 mm (7.24 in)
Knockout
Detail
250 mm (9.84 in)
M16
98
M20
M20/25
M25/32
M32/40
M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
1
1