5416

S455CA, S455DA, S455DC, S455FC, S455GC,
455GE, S455GH, S455IE, S455IH
SENSITRON________ _
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 5416, REV. A
THREE PHASE FULL WAVE RECTIFIER ASSEMBLY
DESCRIPTION: Super fast recovery, fast recovery, general purpose, 3-phase full wave rectifier assembly.
MAXIMUM RATINGS / ELECTRICAL CHARACTERISTICS: All ratings are at tc = 25ºC unless otherwise specified.
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE: (tc, t stg) = -55ºC to + 150ºC.
OPTION: Add suffix “S” to the part number for S-100 screening.
DIELECTRIC: A Dielectric Withstanding Voltage test will be performed with the metal case of the assembly connected to
ground and all terminals connected to the high potential side of a DC power supply or scope display test. Voltage applied
shall be 2800 Vdc and held for 10 seconds.
WEIGHT: 18 gms max.
TYPE
NUMBER
PEAK
INVERSE
VOLTAGE
(PER LEG)
MAX.
AVERAGE DC
OUTPUT
CURRENT
PEAK
1 CYCLE
SURGE
CURRENT
tp = 8.3 msec
(PER LEG)
MAX.
FORWARD
VOLTAGE
DROP
(PER LEG)
MAX.
REVERSE
CURRENT
Ir @ PIV
(PER LEG)
(µA)
MAX.
THERMAL
RESISTANCE
RJC
(PER LEG)
MAX.
REVERSE
REC. TIME
(PERLEG)
IF = 0.5A,
IR = 1.0A,
TRR = 0.25A
Volts
55ºC
100ºC
Amps
Volts
Amps
25ºC
100ºC
ºC/W
ns
S455CA
150
35
23
80
1.10
5
10
100
1.7
40
S455DA
200
35
23
80
1.10
5
10
100
1.7
40
S455DC
200
22
15
80
1.75
9
5
100
2.5
85
S455FC
400
22
15
80
1.75
9
5
100
2.5
85
S455GC
600
22
15
80
1.75
9
5
100
2.5
85
S455GE
600
25
17
80
1.60
9
5
100
1.7
180
S455GH
600
30
20
80
1.40
9
5
100
1.7
5000
S455IE
1000
22
15
80
1.75
9
5
100
2.5
180
S455IH
1000
30
20
80
1.40
9
5
100
1.7
5000
©2014 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
(631) 586-7600 FAX (631) 242-9798  www.sensitron.com  [email protected]
S455CA, S455DA, S455DC, S455FC, S455GC,
455GE, S455GH, S455IE, S455IH
SENSITRON________ _
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 5416, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
CAT. 455
CASE: Black anodized
POTTING SURFACE: Uncontrolled
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation
of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or
any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use
at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations
©2014 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
(631) 586-7600 FAX (631) 242-9798  www.sensitron.com  [email protected]