Express5800/ A2040b/A2020b/A2010b/A1040b Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. The available models depend on sales regions. For details, please contact your region’s sales representative. December 2015 Rev. 11.0 NEC Corporation CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Contents TECHNICAL SPECIFICATION ........................................................................................ 4 NEC Express5800/A2040b (including COPT supported model) ...................................................... 4 NEC Express5800/A2020b ................................................................................................................... 5 NEC Express5800/A2010b ................................................................................................................... 6 NEC Express5800/A1040b ................................................................................................................... 7 EXTERNAL VIEWS ......................................................................................................... 8 Front and Rear Views ........................................................................................................................... 8 Dimensions (mm) ............................................................................................................................... 10 A2040b/A2020b/A2010b ............................................................................................................... 10 A1040b .......................................................................................................................................... 10 CONFIGURATION DIAGRAM ....................................................................................... 11 A2040b ..................................................................................................................................................11 A2020b ..................................................................................................................................................11 A2010b ................................................................................................................................................. 12 A1040b ................................................................................................................................................. 12 EXPANSION SLOT ........................................................................................................ 13 SERVER CONFIGURATION ......................................................................................... 14 1 Base Models ................................................................................................................................ 14 1.1 A2040b .............................................................................................................................. 14 1.2 A2020b .............................................................................................................................. 15 1.3 A2010b .............................................................................................................................. 16 1.4 A1040b .............................................................................................................................. 17 1.5 COPT ................................................................................................................................ 18 2 CPU ............................................................................................................................................... 19 A2040b (min. 2CPU / max. 4CPU)/ A1040b (min. 1CPU / max. 4CPU) ....................................... 19 3 Memory......................................................................................................................................... 21 3.1 Memory Riser Card ........................................................................................................... 21 3.2 Memory Configuration ....................................................................................................... 22 Memory Clock ............................................................................................................................... 28 Maximum Memory Capacity.......................................................................................................... 29 4 Internal Disk Drives ..................................................................................................................... 30 4.1 RAID Configuration ........................................................................................................... 30 4.2 Internal Drive Configuration .............................................................................................. 32 200GB SSD (*CTO*) ............................................................................................................................ 32 400GB SSD (*CTO*) ............................................................................................................................ 32 5 Optical Drive ................................................................................................................................ 36 6 PCI Card ....................................................................................................................................... 37 6.1 Network Interface Controller ............................................................................................. 37 6.2 Using iSCSI (for data usage) ............................................................................................ 39 6.3 External Storage Controller ............................................................................................... 40 6.4 PCIe SSD .......................................................................................................................... 42 7 Other Add-in Components ......................................................................................................... 43 7.1 Power Supply Unit ............................................................................................................. 43 7.2 Redundant Fan Kit ............................................................................................................ 44 7.3 Trusted Platform Module Kit .............................................................................................. 44 7.4 Internal Flash Memory....................................................................................................... 45 8 Add-on Components ................................................................................................................... 46 8.1 17-inch LCD Console Unit ................................................................................................. 46 NEC Corporation Revision 11.0 – December 2015 2 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 8.2 KVM Switch ....................................................................................................................... 47 8.3 Front Bezel ........................................................................................................................ 48 8.4 Cable Arm .......................................................................................................................... 49 8.5 Management Console Specifications ................................................................................ 51 REFERENCES .............................................................................................................. 52 ■CPU .................................................................................................................................................. 52 ■Memory ............................................................................................................................................ 52 ■Internal Drive ................................................................................................................................... 58 ■Connection to RDX (USB) by Device Expansion Unit ................................................................. 60 ■Server Management ........................................................................................................................ 61 ■PCI Slot: Available Slots and Installation Limitations ................................................................. 62 ■PCI Card: Priority/Order of Installation......................................................................................... 73 ■RAS Feature Matrix (per OS) ......................................................................................................... 77 Copyright Notice and Liability Disclaimer ....................................................................................... 80 REVISION HISTORY ..................................................................................................... 81 NEC Corporation Revision 11.0 – December 2015 3 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Technical Specification NEC Express5800/A2040b (including COPT supported model) Key Features 4U/up to 4way high performance with the latest Intel® Xeon® processor E7-8800v2, E7-4800v2 product family Up to 4TB of memory capacity, supporting high speed and energy efficient DDR3L01600 memory Redundant resources; service processors, clock and core I/O components Capacity Optimization (COPT) supported model separately available in line-up for CPU resource optimization Up to 8 2.5-inch HDD/SSD High energy efficiency with 80 PLUS(RI Platinum certified power supply unit Model Name Express5800/A2040b Product Code Base Unit NE3400-040F Base Unit (COPT) CPU Processor Clock Speed Number of CPUs, min./max. CPU 3rd Cache Number of Cores (C) / Thread (T) per CPU NE3400-041F NE3301-H001F NE3301-H002F NE3301-H003F NE3301-H004F NE3301-H005F NE3301-H006F NE3301-H007F NE3301-H008F Intel® Xeon® Processor E7-4890 v2 2.80GHz Intel® Xeon® Processor E7-4870v2 *1 2.30GHz Intel® Xeon® Processor E7-4860v2 2.60GHz Intel® Xeon® Processor E7-4830v2 2.20GHz Intel® Xeon® Processor E7-4820v2 2.00GHz Intel® Xeon® Processor E7-4809v2 *1 1.90GHz Intel® Xeon® Processor E7-8891v2 *1 3.20GHz Intel® Xeon® Processor E7-8893v2 3.40GHz 16MB 12MB 2/4 37.5MB 15C / 30T Chipset Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Hard Memory Auxiliary Storage Device Disk Drive 30MB 15C/30T 20MB 10C / 20T 8C / 16T 6C / 12T 10C / 20T 6C / 12T Intel® C602-J chipset Not pre-installed Registered DIMM : 1TB (64x 16GB), Load Reduced DIMM : 4TB (64x 64GB) DDR3L-1600 Registered DIMM (8/16GB), DDR3L-1600 Load Reduced DIMM (32GB), DDR3L-1333 Load Reduced DIMM (64GB) 1600MHz 1333MHz 1600MHz ECC, x4 SDDC (Independence mode), DDDC (LockStep mode) Supported Supported - Internal (maximum) HDD: 2.5-inch SAS 9.6TB (8x 1.2TB), SSD: 2.5-inch SAS 3.2TB (8x 400GB) Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Expansion Slots Supported Slots Graphics Chip/Video RAM Graphic Display / Resolution Supported SAS 6Gb/s : RAID 0/1/5/6/10/50/60 Internal drive (option) *2 14x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, 167.6mm in length) 2x PCI Express 3.0 (x4 lane, x8 socket) (Low profile, 167.6mm in length) Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 5x USB2.0 (3x front, 1x rear, 1x internal), 1x Analog RGB (Mini D-Sub 15-pin, 1x front), 1x SUV (2x USB2.0, 1x serial (RS-232C/D-Sub 9-pin), 1x VGA (Mini D-Sub 15-pin)) 2x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (hot-plug available) Supported (standard, hot-plug available) Standard Interface Redundant Power Supply Redundant Fan 443.0mm x 719.3mm x 174.5mm (w/o protuberance/inner rail) 482.6mm x 892.5mm x 175.5mm (including protuberance/inner rail) External Dimensions (width x depth x height) Weight (min.*3 / max.) 36kg / 55kg (including rail) Not Pre-installed 800W or 1000W 80 PLUS® Platinum certified, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz Power Supply Unit Power Consumption (100V max. configuration , (100V max. configuration , (100V max. configuration , (200V max. configuration , (200V max. configuration , (200V max. configuration , Calorific Value (KJ/h) 37.5MB 12C/24T 25℃ Standby) 25℃ High Load) Maximum) 25℃ Standby) 25℃ High Load) Maximum) Environmental Requirements Temperature/Humidity 1442VA/1413W 2296VA/2250W 2347VA/2300W 1435VA/1406W 2284VA/2238W 2335VA/2288W 8280KJ/h 1442VA/1413W 2194VA/2150W 2245VA/2200W 1435VA/1406W 2182VA/2138W 2233VA/2188W 7920KJ/h 1442VA/1413W 2194VA/2150W 2245VA/2200W 1435VA/1406W 2182VA/2138W 2233VA/2188W 7920KJ/h 1442VA/1413W 2092VA/2050W 2143VA/2100W 1435VA/1406W 2080VA/2038W 2131VA/2088W 7560KJ/h 1442VA/1413W 2092VA/2050W 2143VA/2100W 1435VA/1406W 2080VA/2038W 2131VA/2088W 7560KJ/h 1442VA/1413W 2092VA/2050W 2143VA/2100W 1435VA/1406W 2080VA/2038W 2131VA/2088W 7560KJ/h 1442VA/1413W 2296VA/2250W 2347VA/2300W 1435VA/1406W 2284VA/2238W 2335VA/2288W 8280KJ/h 1442VA/1413W 2296VA/2250W 2347VA/2300W 1435VA/1406W 2284VA/2238W 2335VA/2288W 8280KJ/h Operating: 10 to 40℃ / 50 to 104℉, 20 to 80% Non-Operating: -10 to 55℃ / 14 to 131℉, 20 to 80% (no condensation either when operating or when stored) EXPRESSBUILDER (NEC ESMPRO Manager (Windows/Linux), NEC ESMPRO Agent, User's Guide (electronic document) included), Getting Started, SUV Cable, Rack Mount Kit Accessories Installed OS Supported OS Microsoft® Windows Server® 2008 R2 Standard (SP1 or later), Microsoft® Windows Server® 2008 R2 Enterprise (SP1 or later), Microsoft® Windows Server® 2012 Standard, Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard *4, Microsoft® Windows Server® 2012 R2 Datacenter *4 Red Hat® Enterprise Linux® 6.4 or later (x86_64), Oracle® Linux 6.4/UEK R2 or later (x86_64) VMware® ESXi™ 5.1 Update 2, VMware® ESXi™ 5.1 Update 3 VMware® ESXi™ 5.5, VMware® ESXi™ 5.5 Update 1, VMware® ESXi™ 5.5 Update 2 VMware® ESXi™ 6.0 Remarks Standby (shown in the Power Consumption) means the status before log-in at OS booted. Note; *1 *2 *3 *4 CTO categorized item; lead time for delivery is different from other item Either internal DVD-ROM or DVD SuperMULTI should be installed for maintenance and/or OS re-installation purpose. Minimum configuration: 2x CPU, 2x DIMM, 0x HDD, 1x PCIe Card, 2x 800W Power Supply Unit Need to use "Support Kit" provided through web site in order to install at users site. NEC Corporation Revision 11.0 – December 2015 4 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NEC Express5800/A2020b Key Features Model Name Product Code 4U/2way server with high performance with the latest Intel® Xeon® processor E7-8800v2, E7-4800v2 product family Up to 4TB of memory capacity, supporting high speed and energy efficient DDR3L01600 memory Superior I/O scalability: up to 16 PCI Express 3.0 slots Redundant resources; service processors, clock and core I/O components Up to 8 2.5-inch HDD/SSD High energy efficiency with 80 PLUS(RI Platinum certified power supply unit CPU Processor Clock Speed Number of CPUs CPU 3rd Cache Number of Cores (C) / Thread (T) per CPU NE3400-021F NE3400-022F NE3400-023F Express5800/A2020b NE3400-024F NE3400-025F NE3400-026F NE3400-027F NE3400-028F Intel® Xeon® Processor E7-4890 v2 2.80GHz Intel® Xeon® Processor E7-4870v2 *1 2.30GHz Intel® Xeon® Processor E7-4860v2 2.60GHz Intel® Xeon® Processor E7-4830v2 2.20GHz Intel® Xeon® Processor E7-4820v2 2.00GHz Intel® Xeon® Processor E7-4809v2 *1 1.90GHz Intel® Xeon® Processor E7-8891v2 *1 3.20GHz Intel® Xeon® Processor E7-8893v2 3.40GHz 16MB 12MB 2 37.5MB 15C / 30T Chipset Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Hard Memory Auxiliary Storage Device Disk Drive 30MB 15C/30T 20MB 10C / 20T 8C / 16T 6C / 12T 10C / 20T 6C / 12T Intel® C602-J chipset Not pre-installed Registered DIMM : 1TB (64x 16GB), Load Reduced DIMM : 4TB (64x 64GB) DDR3L-1600 Registered DIMM (8/16GB), DDR3L-1600 Load Reduced DIMM (32GB), DDR3L-1333 Load Reduced DIMM (64GB) 1600MHz 1333MHz 1600MHz ECC, x4 SDDC (Independence mode), DDDC (LockStep mode) Supported Supported - Internal (maximum) HDD: 2.5-inch SAS 9.6TB (8x 1.2TB), SSD: 2.5-inch SAS 3.2TB (8x 400GB) Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Expansion Slots Supported Slots Graphics Chip/Video RAM Graphic Display / Resolution Supported SAS 6Gb/s : RAID 0/1/5/6/10/50/60 Internal drive (option) *2 14x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, 167.6mm in length) 2x PCI Express 3.0 (x4 lane, x8 socket) (Low profile, 167.6mm in length) Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 5x USB2.0 (3x front, 1x rear, 1x internal), 1x Analog RGB (Mini D-Sub 15-pin, 1x front), 1x SUV (2x USB2.0, 1x serial (RS-232C/D-Sub 9-pin), 1x VGA (Mini D-Sub 15-pin)) 2x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (hot-plug available) Supported (standard, hot-plug available) Standard Interface Redundant Power Supply Redundant Fan 443.0mm x 719.3mm x 174.5mm (w/o protuberance/inner rail) 482.6mm x 892.5mm x 175.5mm (including protuberance/inner rail) External Dimensions (width x depth x height) Weight (min.*3 / max.) 36kg / 55kg (including rail) Not Pre-installed 800W or 1000W 80 PLUS® Platinum certified, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz Power Supply Unit Power Consumption (100V max. configuration , (100V max. configuration , (100V max. configuration , (200V max. configuration , (200V max. configuration , (200V max. configuration , Calorific Value (KJ/h) 37.5MB 12C/24T 25℃ Standby) 25℃ High Load) Maximum) 25℃ Standby) 25℃ High Load) Maximum) Environmental Requirements Temperature/Humidity 1442VA/1413W 2169VA/2126W 2220VA/2176W 1435VA/1406W 2157VA/2114W 2208VA/2164W 7834KJ/h 1442VA/1413W 2088VA/2046W 2139VA/2096W 1435VA/1406W 2076VA/2034W 2127VA/2084W 7546KJ/h 1442VA/1413W 2088VA/2046W 2139VA/2096W 1435VA/1406W 2076VA/2034W 2127VA/2084W 7546KJ/h 1442VA/1413W 2006VA/1966W 2057VA/2016W 1435VA/1406W 1994VA/1954W 2045VA/2004W 7258KJ/h 1442VA/1413W 2006VA/1966W 2057VA/2016W 1435VA/1406W 1994VA/1954W 2045VA/2004W 7258KJ/h 1442VA/1413W 2006VA/1966W 2057VA/2016W 1435VA/1406W 1994VA/1954W 2045VA/2004W 7258KJ/h 1442VA/1413W 2169VA/2126W 2220VA/2176W 1435VA/1406W 2157VA/2114W 2208VA/2164W 7834KJ/h 1442VA/1413W 2169VA/2126W 2220VA/2176W 1435VA/1406W 2157VA/2114W 2208VA/2164W 7834KJ/h Operating: 10 to 40℃ / 50 to 104℉, 20 to 80% Non-Operating: -10 to 55℃ / 14 to 131℉, 20 to 80% (no condensation either when operating or when stored) EXPRESSBUILDER (NEC ESMPRO Manager (Windows/Linux), NEC ESMPRO Agent, User's Guide (electronic document) included), Getting Started, SUV Cable, Rack Mount Kit Accessories Installed OS Supported OS Microsoft® Windows Server® 2008 R2 Standard (SP1 or later), Microsoft® Windows Server® 2008 R2 Enterprise (SP1 or later), Microsoft® Windows Server® 2012 Standard, Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard *4, Microsoft® Windows Server® 2012 R2 Datacenter *4 Red Hat® Enterprise Linux® 6.4 or later (x86_64), Oracle® Linux 6.4/UEK R2 or later (x86_64) VMware® ESXi™ 5.1 Update 2, VMware® ESXi™ 5.1 Update 3 VMware® ESXi™ 5.5, VMware® ESXi™ 5.5 Update 1, VMware® ESXi™ 5.5 Update 2 VMware® ESXi™ 6.0 Remarks Standby (shown in the Power Consumption) means the status before log-in at OS booted. Note; *1 *2 *3 *4 CTO categorized item; lead time for delivery is different from other item Either internal DVD-ROM or DVD SuperMULTI should be installed for maintenance and/or OS re-installation purpose. Minimum configuration: 2x CPU, 2x DIMM, 0x HDD, 1x PCIe Card, 2x 800W Power Supply Unit Need to use "Support Kit" provided through web site in order to install at users site. NEC Corporation Revision 11.0 – December 2015 5 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NEC Express5800/A2010b Key Features Model Name Product Code 4U/1way server with high performance with the latest Intel® Xeon® processor E7-8800v2, E7-4800v2 product family Up to 2TB of memory capacity, supporting high speed and energy efficient DDR3L01600 memory Superior I/O scalability: up to 9 PCI Express 3.0 slots Redundant resources; service processors, clock and core I/O components Up to 8 2.5-inch HDD/SSD High energy efficiency with 80 PLUS(RI Platinum certified power supply unit CPU Processor Clock Speed Number of CPUs CPU 3rd Cache Number of Cores (C) / Thread (T) per CPU NE3400-031F NE3400-032F NE3400-033F Express5800/A2010b NE3400-034F NE3400-035F NE3400-036F NE3400-037F NE3400-038F Intel® Xeon® Processor E7-4890 v2 2.80GHz Intel® Xeon® Processor E7-4870v2 *1 2.30GHz Intel® Xeon® Processor E7-4860v2 2.60GHz Intel® Xeon® Processor E7-4830v2 2.20GHz Intel® Xeon® Processor E7-4820v2 2.00GHz Intel® Xeon® Processor E7-4809v2 *1 1.90GHz Intel® Xeon® Processor E7-8891v2 *1 3.20GHz Intel® Xeon® Processor E7-8893v2 3.40GHz 16MB 12MB 1 37.5MB 15C / 30T Chipset Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Hard Memory Auxiliary Storage Device Disk Drive 30MB 15C/30T 20MB 10C / 20T 8C / 16T 6C / 12T 10C / 20T 6C / 12T Intel® C602-J chipset Not pre-installed Registered DIMM : 512GB (32x 16GB), Load Reduced DIMM : 2TB (32x 64GB) DDR3L-1600 Registered DIMM (8/16GB), DDR3L-1600 Load Reduced DIMM (32GB), DDR3L-1333 Load Reduced DIMM (64GB) 1600MHz 1333MHz 1600MHz ECC, x4 SDDC (Independence mode), DDDC (LockStep mode) Supported Supported - Internal (maximum) HDD: 2.5-inch SAS 9.6TB (8x 1.2TB), SSD: 2.5-inch SAS 3.2TB (8x 400GB) Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Expansion Slots Supported Slots Graphics Chip/Video RAM Graphic Display / Resolution Supported SAS 6Gb/s : RAID 0/1/5/6/10/50/60 Internaldrive (option) *2 7x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, 167.6mm in length) 2x PCI Express 3.0 (x4 lane, x8 socket) (Low profile, 167.6mm in length) Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 5x USB2.0 (3x front, 1x rear, 1x internal), 1x Analog RGB (Mini D-Sub 15-pin, 1x front), 1x SUV (2x USB2.0, 1x serial (RS-232C/D-Sub 9-pin), 1x VGA (Mini D-Sub 15-pin)) 2x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (hot-plug available) Supported (standard, hot-plug available) Standard Interface Redundant Power Supply Redundant Fan 443.0mm x 719.3mm x 174.5mm (w/o protuberance/inner rail) 482.6mm x 892.5mm x 175.5mm (including protuberance/inner rail) External Dimensions (width x depth x height) Weight (min.*3 / max.) 36kg / 49kg (including rail) Not Pre-installed 800W or 1000W 80 PLUS® Platinum certified, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz Power Supply Unit Power Consumption (100V max. configuration , (100V max. configuration , (100V max. configuration , (200V max. configuration , (200V max. configuration , (200V max. configuration , Calorific Value (KJ/h) 37.5MB 12C/24T 25℃ Standby) 25℃ High Load) Maximum) 25℃ Standby) 25℃ High Load) Maximum) Environmental Requirements Temperature/Humidity 1033VA/1012W 1370VA/1343W 1421VA/1393W 1028VA/1007W 1363VA/1336W 1414VA/1386W 5015KJ/h 1033VA/1012W 1330VA/1303W 1381VA/1353W 1028VA/1007W 1322VA/1296W 1373VA/1346W 4871KJ/h 1033VA/1012W 1330VA/1303W 1381VA/1353W 1028VA/1007W 1322VA/1296W 1373VA/1346W 4871KJ/h 1033VA/1012W 1289VA/1263W 1340VA/1313W 1028VA/1007W 1282VA/1256W 1333VA/1306W 4727KJ/h 1033VA/1012W 1289VA/1263W 1340VA/1313W 1028VA/1007W 1282VA/1256W 1333VA/1306W 4727KJ/h 1033VA/1012W 1289VA/1263W 1340VA/1313W 1028VA/1007W 1282VA/1256W 1333VA/1306W 4727KJ/h 1033VA/1012W 1370VA/1343W 1421VA/1393W 1028VA/1007W 1363VA/1336W 1414VA/1386W 5015KJ/h 1033VA/1012W 1370VA/1343W 1421VA/1393W 1028VA/1007W 1363VA/1336W 1414VA/1386W 5015KJ/h Operating: 10 to 40℃ / 50 to 104℉, 20 to 80% Non-Operating: -10 to 55℃ / 14 to 131℉, 20 to 80% (no condensation either when operating or when stored) EXPRESSBUILDER (NEC ESMPRO Manager (Windows/Linux), NEC ESMPRO Agent, User's Guide (electronic document) included), Getting Started, SUV Cable, Rack Mount Kit Accessories Installed OS Supported OS Microsoft® Windows Server® 2008 R2 Standard (SP1 or later), Microsoft® Windows Server® 2008 R2 Enterprise (SP1 or later), Microsoft® Windows Server® 2012 Standard, Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard *4, Microsoft® Windows Server® 2012 R2 Datacenter *4 Red Hat® Enterprise Linux® 6.4 or later (x86_64), Oracle® Linux 6.4/UEK R2 or later (x86_64) VMware® ESXi™ 5.1 Update 2, VMware® ESXi™ 5.1 Update 3 VMware® ESXi™ 5.5, VMware® ESXi™ 5.5 Update 1, VMware® ESXi™ 5.5 Update 2 VMware® ESXi™ 6.0 Remarks Standby (shown in the Power Consumption) means the status before log-in at OS booted. Note; *1 *2 *3 *4 CTO categorized item; lead time for delivery is different from other item Either internal DVD-ROM or DVD SuperMULTI should be installed for maintenance and/or OS re-installation purpose. Minimum configuration: 1x CPU, 2x DIMM, 0x HDD, 1x PCIe Card, 2x 800W Power Supply Unit Need to use "Support Kit" provided through web site in order to install at users site. NEC Corporation Revision 11.0 – December 2015 6 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NEC Express5800/A1040b Key Features 4U/up to 4way server with high performance with the latest Intel® Xeon® processor E7-8800v2, E7-4800v2 product family Up to 4TB of memory capacity, supporting high speed and energy efficient DDR3L01600 memory Up to 8 2.5-inch HDD/SSD High energy efficiency with 80 PLUS(RI Platinum certified power supply unit Model Name Express5800/A1040b Product Code Base Unit CPU Processor Clock Speed Number of CPUs, min./max. CPU 3rd Cache Number of Cores (C) / Thread (T) per CPU NE3300-040F NE3301-H001F NE3301-H002F NE3301-H003F NE3301-H004F NE3301-H005F NE3301-H006F NE3301-H007F NE3301-H008F Intel® Xeon® Processor E7-4890 v2 2.80GHz Intel® Xeon® Processor E7-4870v2 *1 2.30GHz Intel® Xeon® Processor E7-4860v2 2.60GHz Intel® Xeon® Processor E7-4830v2 2.20GHz Intel® Xeon® Processor E7-4820v2 2.00GHz Intel® Xeon® Processor E7-4809v2 *1 1.90GHz Intel® Xeon® Processor E7-8891v2 *1 3.20GHz Intel® Xeon® Processor E7-8893v2 3.40GHz 16MB 12MB 1/4 37.5MB 15C / 30T Chipset Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Hard Memory Auxiliary Storage Device Disk Drive 30MB 15C/30T 20MB 10C / 20T 8C / 16T 6C / 12T 10C / 20T 6C / 12T Intel® C602-J chipset Not pre-installed Registered DIMM : 1TB (64x 16GB), Load Reduced DIMM : 4TB (64x 64GB) DDR3L-1600 Registered DIMM (8/16GB), DDR3L-1600 Load Reduced DIMM (32GB), DDR3L-1333 Load Reduced DIMM (64GB) 1600MHz 1333MHz 1600MHz ECC, x4 SDDC (Independence mode), DDDC (LockStep mode) Supported Supported - Internal (maximum) HDD: 2.5-inch SAS 9.6TB (8x 1.2TB), SSD: 2.5-inch SAS 3.2TB (8x 400GB) Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Expansion Slots Supported Slots Graphics Chip/Video RAM Graphic Display / Resolution Supported SAS 6Gb/s : RAID 0/1/5/6/10/50/60 Internal drive (option) *2 14x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, 167.6mm in length) 2x PCI Express 3.0 (x4 lane, x8 socket) (Low profile, 167.6mm in length) Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 5x USB2.0 (3x front, 1x rear, 1x internal), 1x Analog RGB (Mini D-Sub 15-pin, 1x front), 1x SUV (2x USB2.0, 1x serial (RS-232C/D-Sub 9-pin), 1x VGA (Mini D-Sub 15-pin)) 1x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 1x rear) Supported (hot-plug available) Supported (standard, hot-plug available) Standard Interface Redundant Power Supply Redundant Fan 443.0mm x 719.3mm x 174.5mm (w/o protuberance/inner rail) 482.6mm x 892.5mm x 175.5mm (including protuberance/inner rail) External Dimensions (width x depth x height) Weight (min.*3 / max.) 35kg / 54kg (including rail) Not Pre-installed 800W or 1000W 80 PLUS® Platinum certified, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz Power Supply Unit Power Consumption (100V max. configuration , (100V max. configuration , (100V max. configuration , (200V max. configuration , (200V max. configuration , (200V max. configuration , Calorific Value (KJ/h) 37.5MB 12C/24T 25℃ Standby) 25℃ High Load) Maximum) 25℃ Standby) 25℃ High Load) Maximum) Environmental Requirements Temperature/Humidity 1435VA/1406W 2288VA/2242W 2339VA/2292W 1428VA/1399W 2277VA/2231W 2328VA/2281W 8251KJ/h 1435VA/1406W 2186VA/2142W 2237VA/2192W 1428VA/1399W 2174VA/2131W 2226VA/2181W 7891KJ/h 1435VA/1406W 2186VA/2142W 2237VA/2192W 1428VA/1399W 2174VA/2131W 2226VA/2181W 7891KJ/h 1435VA/1406W 2084VA/2042W 2135VA/2092W 1428VA/1399W 2072VA/2031W 2123VA/2081W 7531KJ/h 1435VA/1406W 2084VA/2042W 2135VA/2092W 1428VA/1399W 2072VA/2031W 2123VA/2081W 7531KJ/h 1435VA/1406W 2084VA/2042W 2135VA/2092W 1428VA/1399W 2072VA/2031W 2123VA/2081W 7531KJ/h 1435VA/1406W 2288VA/2242W 2339VA/2292W 1428VA/1399W 2277VA/2231W 2328VA/2281W 8251KJ/h 1435VA/1406W 2288VA/2242W 2339VA/2292W 1428VA/1399W 2277VA/2231W 2328VA/2281W 8251KJ/h Operating: 10 to 40℃ / 50 to 104℉, 20 to 80% Non-Operating: -10 to 55℃ / 14 to 131℉, 20 to 80% (no condensation either when operating or when stored) EXPRESSBUILDER (NEC ESMPRO Manager (Windows/Linux), NEC ESMPRO Agent, User's Guide (electronic document) included), Getting Started, SUV Cable, Rack Mount Kit Accessories Installed OS Supported OS Microsoft® Windows Server® 2008 R2 Standard (SP1 or later), Microsoft® Windows Server® 2008 R2 Enterprise (SP1 or later), Microsoft® Windows Server® 2012 Standard, Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard *4, Microsoft® Windows Server® 2012 R2 Datacenter *4 Red Hat® Enterprise Linux® 6.4 or later (x86_64), Oracle® Linux 6.4/UEK R2 or later (x86_64) VMware® ESXi™ 5.1 Update 2, VMware® ESXi™ 5.1 Update 3 VMware® ESXi™ 5.5, VMware® ESXi™ 5.5 Update 1, VMware® ESXi™ 5.5 Update 2 VMware® ESXi™ 6.0 Remarks Standby (shown in the Power Consumption) means the status before log-in at OS booted. Note; *1 *2 *3 *4 CTO categorized item; lead time for delivery is different from other item Either internal DVD-ROM or DVD SuperMULTI should be installed for maintenance and/or OS re-installation purpose. Minimum configuration: 1x CPU, 2x DIMM, 0x HDD, 1x PCIe Card, 2x 1000W Power Supply Unit Need to use "Support Kit" provided through web site in order to install at users site. NEC Corporation Revision 11.0 – December 2015 7 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b External Views Front and Rear Views Front View A B C DE J K L M N O P Q R S U T B F GH I V W X Legend A. B. Location LED M. BMC OFF Button NMI Button PSU/FAN LED N. C. PCI LED O. RESET Button D. MEM LED P. UID LED E. CPU LED Q. UID Button F. VLT/TMP LED (Voltage/Temperature) R. SYSTEM POWER LED G. CNFG LED (Configuration) S. SYSTEM POWER Button H. MISC LED T. USB Connectors I. NEXT LED U. VGA Connector J. NEXT Button V. Optical Drive Bay K. DISK Access LED W. 2.5-inch Drive Bays L. SYSTEM STATUS LED X. Slide Tag NEC Corporation Revision 11.0 – December 2015 8 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Rear View ABC E F G H I D J K L M N O P Legend A. MGB#1 Status LED B. I. MGB#1 Maintenance LAN Connector UID LED J. MGB#1 Management LAN Connector C. MGB#2 Status LED *1 K. MGB#2 Maintenance LAN Connector *1 D. PCI Slots (Low Profile) L. MGB#2 Management LAN Connector *1 E. UID Button M. SUVCable Connector *2 F. MGB#1 RESET Button N. Power Supply Unit G. MGB#2 RESET Button *1 O. AC POWER LED USB Connector P. AC Inlet H. *1 Not applicable to A1040b *2 2x USB Connectors and 1x Serial Port and 1 x VGA Connector can be connected through SUB Cable (attached to Base Models, 2m length) NEC Corporation Revision 11.0 – December 2015 9 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Dimensions (mm) A2040b/A2020b/A2010b * A1040b * * NEC Corporation In case of using slide rail attachment (cable arm in use) The above illustrations including inner rail. Revision 11.0 – December 2015 10 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Configuration Diagram A2040b Legend: Standard components Minimum required components Standard components Minimum required components A2020b Legend: NEC Corporation Revision 11.0 – December 2015 11 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b A2010b Legend: Standard components Minimum required components Standard components Minimum required components A1040b Legend: NEC Corporation Revision 11.0 – December 2015 12 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Expansion Slot Slot #16 Slot #15 Slot #14 Slot #13 Slot #12 Slot #11 Slot #10 Slot #9 Slot #8 Slot #7 Slot #6 Slot #5 Slot #4 Slot #3 Slot #2 Slot #1 Legend Slot #1 PCI Express 3.0 (x8 lane, x8 socket) Slot #2 PCI Express 3.0 (x8 lane, x8 socket) Slot #3 PCI Express 3.0 (x8 lane, x8 socket) Slot #4 PCI Express 3.0 (x8 lane, x8 socket) Slot #5 PCI Express 3.0 (x8 lane, x8 socket) Slot #6 PCI Express 3.0 (x8 lane, x8 socket) Slot #7 PCI Express 3.0 (x8 lane, x8 socket) Slot #8 PCI Express 3.0 (x4 lane, x8 socket) Slot #9 PCI Express 3.0 (x4 lane, x8 socket) Slot #10 PCI Express 3.0 (x8 lane, x8 socket) Slot #11 PCI Express 3.0 (x8 lane, x8 socket) Slot #12 PCI Express 3.0 (x8 lane, x8 socket) Slot #13 PCI Express 3.0 (x8 lane, x8 socket) Slot #14 PCI Express 3.0 (x8 lane, x8 socket) Slot #15 PCI Express 3.0 (x8 lane, x8 socket) Slot #16 PCI Express 3.0 (x8 lane, x8 socket) NOTE: Foa all PCI slot: Low Profile, 167.6mm in length PCI slot performance: x4 lane for Slot #8 and #9, x8 lane for the others Hot Plug supported: Slot #2 to #9 (8 slots), except for A1040b For A2040b: Slot#1 to #9 are available in case of 2CPU configuration, Slot#1 to #13 are available in case of 3CPU configuration and Slot#1 to #16 are available in case of 4CPU configuration. For A2020b: Slot#1 to #16 are available For A2010b: Slot#1 to #9 are available For A1040b: Slot#1 and Slot#3 to #5 are available in case of 1CPU configuration, Slot#1 to #9 are available in case of 2CPU configuration, Slot#1 to #13 are available in case of 3CPU configuration and Slot#1 to #16 are available in case of 4CPU configuration NEC Corporation Revision 11.0 – December 2015 13 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Server Configuration 1 Base Models 1.1 A2040b Product Name/Description Part Number NEC Express5800/A2040b no processor, no RAM, no HDD, no ODD, no Power Supply Unit, no OS NE3400-040F NEC Express5800/A2040b (COPT) no processor, no RAM, no HDD, no ODD, no Power Supply Unit, no OS NE3400-041F NOTE: The base model must be ordered with processor kits, memory riser cards, memory kit, power supply units and power cables. Front Bezel and Cable Arm are not attached; need to be ordered separately if required. Number of the available PCI Slots and Memory Riser Card depends on the number of CPUs <Available PCI Slots and Maximum No. of Memory Riser Card> No. of CPU Max. No. of Memory Riser #1 #2 #3 #4 #5 #6 #7 #8 #9 2 4 Y Y Y Y Y Y Y Y Y ‐ 3 6 Y Y Y Y Y Y Y Y Y Y Y Y Y 4 8 Y Y Y Y Y Y Y Y Y Y Y Y Y NEC Corporation Available PCI Slots Revision 11.0 – December 2015 #10 #11 #12 #13 #14 #15 #16 ‐ ‐ ‐ ‐ ‐ ‐ ‐ ‐ ‐ Y Y Y 14 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 1.2 A2020b Product Name/Description Part Number NEC Express5800/A2020b (15C/E7-4890v2) 2x Intel® Xeon® Processor E7-4890v2 (2.80 GHz, 15C/30T, 37.5 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (15C/E7-4870v2) (*CTO*) 2x Intel® Xeon® Processor E7-4870v2 (2.30 GHz, 15C/30T, 30 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (12C/E7-4860v2) 2x Intel® Xeon® Processor E7-4860v2 (2.60 GHz, 12C/24T, 30 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (10C/E7-4830v2) 2x Intel® Xeon® Processor E7-4830v2 (2.20 GHz, 10C/20T, 20 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (8C/E7-4820v2) 2x Intel® Xeon® Processor E7-4820v2 (2.00 GHz, 8C/16T, 16 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (6C/E7-4809v2) (*CTO*) 2x Intel® Xeon® Processor E7-4809v2 (1.90 GHz, 6C/12T, 12 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (10C/E7-8891v2) (*CTO*) 2x Intel® Xeon® Processor E7-8891v2 (3.20 GHz, 10C/20T, 37.5 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2020b (6C/E7-8893v2) 2x Intel® Xeon® Processor E7-8893v2 (3.40 GHz, 6C/12T, 37.5 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NE3400-021F NE3400-022F NE3400-023F NE3400-024F NE3400-025F NE3400-026F NE3400-027F NE3400-028F NOTE: The base model must be ordered with memory riser cards, memory kit, power supply units and power cables. Front Bezel and Cable Arm are not attached; need to be ordered separately if required. 2CPU (fixed) model: cannot add CPU (*CTO*) CTO categorized item; lead time for delivery is different from other item. <Available PCI Slots and Maximum No. of Memory Riser Card> No. of CPU Max. No. of Memory Riser #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 2 8 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y NEC Corporation Available PCI Slots Revision 11.0 – December 2015 15 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 1.3 A2010b Product Name/Description Part Number NEC Express5800/A2010b (15C/E7-4890v2) 1x Intel® Xeon® Processor E7-4890v2 (2.80 GHz, 15C/30T, 37.5 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (15C/E7-4870v2) (*CTO*) 1x Intel® Xeon® Processor E7-4870v2 (2.30 GHz, 15C/30T, 30 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (12C/E7-4860v2) 1x Intel® Xeon® Processor E7-4860v2 (2.60 GHz, 12C/24T, 30 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (10C/E7-4830v2) 1x Intel® Xeon® Processor E7-4830v2 (2.20 GHz, 10C/20T, 20 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (8C/E7-4820v2) 1x Intel® Xeon® Processor E7-4820v2 (2.00 GHz, 8C/16T, 16 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (6C/E7-4809v2) (*CTO*) 1x Intel® Xeon® Processor E7-4809v2 (1.90 GHz, 6C/12T, 12 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (10C/E7-8891v2) (*CTO*) 1x Intel® Xeon® Processor E7-8891v2 (3.20 GHz, 10C/20T, 37.5 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2010b (6C/E7-8893v2) 1x Intel® Xeon® Processor E7-8893v2 (3.40 GHz, 6C/12T, 37.5 MB) no RAM, no HDD, no ODD, no Power Supply Unit, no OS NE3400-031F NE3400-032F NE3400-033F NE3400-034F NE3400-035F NE3400-036F NE3400-037F NE3400-038F NOTE: The base model must be ordered with memory riser cards, memory kit, power supply units and power cables. Front Bezel and Cable Arm are not attached; need to be ordered separately if required. 1CPU (fixed) model: cannot add CPU (*CTO*) CTO categorized item; lead time for delivery is different from other item. <Available PCI Slots and Maximum No. of Memory Riser Card> No. of CPU Max. No. of Memory Riser #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 1 4 Y Y Y Y Y Y Y Y Y ‐ ‐ ‐ ‐ ‐ ‐ ‐ NEC Corporation Available PCI Slots Revision 11.0 – December 2015 16 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 1.4 A1040b Product Name/Description Part Number NEC Express5800/A1040b no processor, no RAM, no HDD, no ODD, no Power Supply Unit, no OS NE3300-040F NOTE: The base model must be ordered with processor kits, memory riser cards, memory kit, power supply units and power cables. Front Bezel and Cable Arm are not attached; need to be ordered separately if required. Number of the available PCI Slots and Memory Riser Card depends on the number of CPUs <Available PCI Slots and Maximum No. of Memory Riser Card> No. of CPU Max. No. of Memory Riser 1 Available PCI Slots #1 #2 #3 #4 #5 2 Y ‐ Y Y Y 2 4 Y Y Y Y Y Y Y 3 6 Y Y Y Y Y Y 4 8 Y Y Y Y Y Y NEC Corporation #6 ‐ #7 #9 #10 #11 #12 #13 #14 #15 #16 ‐ ‐ ‐ ‐ ‐ ‐ ‐ ‐ Y Y ‐ ‐ ‐ ‐ ‐ ‐ ‐ Y Y Y Y Y Y Y ‐ ‐ ‐ Y Y Y Y Y Y Y Y Y Y ‐ #8 ‐ Revision 11.0 – December 2015 17 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 1.5 COPT Capacity Optimization (COPT) is a function to optimize computing resources by enabling CPU cores as many required per workload without any impact to the number of DIMM and PCI slots which depends on CPU configuration. When necessary, CPU core can be enabled additionally on-site. COPT is available only with A2040b COPT supported model (NEC Express5800/A2040b (COPT)). In order to enable CPU core, Core Activation Key should be ordered for the required number of cores. Product Name/Description Part Number One Core Activation Key (for Embedded) NE3401-H010F Need to order at the same time of the server. As many CPU cores as the ordered number of the One Core Activation Key (for Embedded) are to be enabled when the ordered server is shipped. Up to the ordered number of the One Core Activation Key (for Embedded), CPU cores are available for use. One Core Activation Key (for Add-on) The enabled CPU core can be added on-site. NE3401-H011F As many Code Words as the ordered number of the One Core Activation Key (for Add-on) are shipped, and additional CPU core can be enabled by applying the Code Word to the server. NOTE: Contact to our sales representative for software supporting COPT function. When enabling CPU core (or socket) by Core Activation Key, please purchase required software license as appropriate In case of using socket license based software, please enable CPU core at the CPU socket on which the software is operating. Software license is required for the socket with at least one enabled CPU core. Depending on the OS, the server may need to be rebooted to enable CPU cores Remarks to use COPT under Linux environment - In case of using Fibre Channel Controller (16Gbps) [NE3390-157A/-158A], need to enable enough CPU cores to have 4 or more logical processors. Remarks to use COPT under Windows environment - Depending on the number of CPU cores to be enabled, PCI cards have limitations to install. Please refer to “PCI Slot: Available Slots and Installation Limitations”. Remarks to use COPT under VMware environment: - Need to purchase the same number of One Core Activation Key as the number of CPU socket. - Need to enable the same count of CPU cores among all CPUs (excluding CPUs with all cores disabled) <Examples of OK or NG configuration in case of 4CPU configuration> Ex.1: OK Ex.2: OK Ex.3: NG Ex.4: NG CPU1: 1 core enabled CPU2: 1 core enabled CPU3: 1 core enabled CPU4: 1 core enabled CPU1: 4 core enabled CPU2: 0 core enabled CPU3: 0 core enabled CPU4: 0 core enabled CPU1: 2 core enabled CPU2: 1 core enabled CPU3: 1 core enabled CPU4: 0 core enabled CPU1: 1 core enabled CPU2: 1 core enabled CPU3: 1 core enabled CPU4: 0 core enabled For the details, please refer to the latest version of “Express5800/A2040b Capacity Optimization (COPT) User's Guide” Default setting of Core Optimization Mode is “Decentralize”, where the enabled CPU cores are distributed to each socket equally. NEC Corporation Revision 11.0 – December 2015 18 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 2 CPU A2040b (min. 2CPU / max. 4CPU)/ A1040b (min. 1CPU / max. 4CPU) Product Name/Description Part Number Xeon E7-4890 v2 Processor Kit 1x Intel® Xeon® Processor E7-4890 v2(2.80 GHz, 15C/30T, 37.5MB) Xeon E7-4870v2 Processor Kit (*CTO*) 1x Intel® Xeon® Processor E7-4870v2 (2.30 GHz, 15C/30T, 30 MB) Xeon E7-4860v2 Processor Kit 1x Intel® Xeon® Processor E7-4860v2 (2.60 GHz, 12C/24T, 30 MB) Xeon E7-4830v2 Processor Kit 1x Intel® Xeon® Processor E7-4830v2 (2.20 GHz, 10C/20T, 20 MB) Xeon E7-4820v2 Processor Kit 1x Intel® Xeon® Processor E7-4820v2 (2.00 GHz, 8C/16T, 16 MB) Xeon E7-4809v2 Processor Kit (*CTO*) 1x Intel® Xeon® Processor E7-4809v2 (1.90 GHz, 6C/12T, 12 MB) Xeon E7-8891v2 Processor Kit (*CTO*) 1x Intel® Xeon® Processor E7-8891v2 (3.20 GHz, 10C/20T, 37.5 MB) Xeon E7-8893v2 Processor Kit 1x Intel® Xeon® Processor E7-8893v2 (3.40 GHz, 6C/12T, 37.5 MB) NE3301-H001F NE3301-H002F NE3301-H003F NE3301-H004F NE3301-H005F NE3301-H006F NE3301-H007F NE3301-H008F NOTE: (*CTO*) CTO categorized item; lead time for delivery is different from other item. Different SKU of CPU/Processors cannot be mixed in a server. NEC Corporation Revision 11.0 – December 2015 19 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b CPU Functions Intel® Xeon® Processors for this server supports the following CPU functions Category Function Name/Summary CPU 64 bit Intel® 64 64 bit function Power Saving Enhanced Intel SpeedStep® Technology (Intel® Demand Bases Switching Technology) Technology to decrease power consumption by adjusting voltage/clock per CPU workload Xeon E7-4809v2 Xeon E7-4890v2,E7-4870v2 E7-4860v2,E7-4830v2 E7-4820v2 E7-8891v2,E7-8893v2 Performance Intel® Turbo Boost Technology Technology to boost clock frequency ‐ Performance Intel® Hyper-Threading Technology Technology to use one core as two threads Virtualization Intel® Virtualization Technology Technology to provide hardware (CPU) support for processor virtualization Execute Disable Technology to avoid the execution of malware utilizing buffer over flow error Security The maximum number of logical processors supported by OS See the table below for the maximum number of logical processors that you can actually use on your system Maximum Number of Logical Processors Supported by Operating Systems Maximum Number of Logical Processors Supported by this Server Microsoft Windows Server 2008 R2 SP1 Standard Microsoft Windows Server 2008 R2 SP1 Enterprise Microsoft Windows Server 2008 R2 SP1 Datacenter 256 1 Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Datacenter 640 1 Red Hat Enterprise Linux 6 (x86_64) 240 120 Oracle Linux 6 /UEK R2 (x86_64) 240 120 VMware ESXi 5.1 160 120 VMware ESXi 5.5 320 120 480 120 Vmware ESXi 6.0 1 120 120 The maximum number of logical processors when using Hyper-V are below: Windows Server 2008 R2 SP1: 64 logical processors Windows Server 2012, Windows Server 2012 R2 : 320 logical processors NEC Corporation Revision 11.0 – December 2015 20 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3 Memory 3.1 Memory Riser Card Memory Riser Card (“MR”) is a module for installing up to 8 DIMM Please refer to “Memory” of “Reference” section for Memory Riser Card installation priority/order. For A2040b (including COPT model), A2020b,A2010b Product Name/Description Part Number Memory Riser Card (16GB/32GB/64GB Memory Kit) Module with 8x DIMM slots. Hot-plug supoprted Memory Riser Card (16GB/32GB/64GB/128GB Memory Kit) Module with 8x DIMM slots. Hot-plug supoprted NE3402-H001 NE3402-H002 NOTE: A2040b: 1 to 2 MRs can be installed per CPU, thus up to 8 MRs can be installed with 4CPU configuration A2020b: Up to 8 MRs can be installed A2010b: Up to 4 MRs can be installed Not pre-installed in Base Model. At least one MR needs to be ordered. Cover for Hot-plug is attached NE3402-H001 and NE3402-H002 can be mixed in one server. For A1040b Product Name/Description Part Number Memory Riser Card (16GB/32GB/64GB Memory Kit) Module with 8x DIMM slots. Hot-plug not supported NE3302-H001 Memory Riser Card (16GB/32GB/64GB/128GB Memory Kit) Module with 8x DIMM slots. Hot-plug not supported NE3302-H002 NOTE: 1 to 2 MRs can be installed per CPU, thus up to 8 MRs can be installed with 4CPU configuration Not pre-installed in Base Model. At least one MR needs to be ordered. NE3302-H001 and NE3302-H002 can be mixed in one server. Customized Configuration Service (at the Server Delivery) Product Name/Description Part Number Customized Service: Distribution Mode for COPT NE3300-SV101 NOTE: This service can be ordered only for A2040b COPT Model and up to one item (service) can be ordered per one server. With this service, the location of MR can be changed from the standard BTO Configuration. When allocating enabled CPU cores to all CPU (distributed), this service is recommended to use so that MR and Memory can be distributed, too. Please refer to “Memory” of “Reference” section for Memory Riser Card installation priority/order. NEC Corporation Revision 11.0 – December 2015 21 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3.2 Memory Configuration Refer to the section in accordance with your memory configuration. Memory configuration consists of 2 modes; “Independent Mode” and “Lockstep Mode”. Under each Mode, 2 features are available; “Memory Rank Sparing” and “Memory Mirroring”. Default setting at the server delivery is Lockstep Mode. Independent Mode (only): Refer to 3.2.1 Lockstep Mode (only): Refer to 3.2.2 Memory Rank Sparing: Refer to 3.2.3 Memory Mirroring: Refer to 3.2.4 Please refer to “Memory” of “Reference” section for Memory on the Memory Riser Card (DIMM) installation priority/order per Independent Mode, Lockstep Mode, Memory Rank Sparing and Memory Mirroring.. Memory Configuration Feature Comparison See the table below for feature comparisons of memory configurations supported. Independent Mode (only) Summary Memory Rank Sparing under Independent Mode In case of correctable errors, switching to spare memory rank Available Memory Available Memory 1 Channel Maximum Memory 2 Capacity 1 2 Redundant memory - 1/2(8GB RDIMM), 3/4(16GB RDIMM), 7/8(32GB LRDIMM) or 3/4(64GB LRDIMM) of physical memory 1/2 of physical memory 4 4 4 512GB(8GB RDIMM) 1024GB(16GB RDIMM) 2048GB(32GB LRDIMM) 4096GB(64GB LRDIMM) 256GB(8GB RDIMM) 768GB(16GB RDIMM) 1792GB(32GB LRDIMM) 3072GB(64GB LRDIMM) 256GB(8GB RDIMM) 512GB(16GB RDIMM) 1024GB(32GB LRDIMM) 2048GB(64GB LRDIMM) ECC, x4 SDDC ← ← Data Correction Notes Memory Mirroring under Independent Mode RDIMM and LRDIMM cannot be mixed RDIMM and LRDIMM cannot be mixed RDIMM and LRDIMM cannot be mixed 4 memory channels per Memory Riser Card. All DIMMs have the same capacity NEC Corporation Revision 11.0 – December 2015 22 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Summary Lockstep Mode (only) Memory Rank Sparing under Lockstep Mode 2 DRAM failure detected/corrected by memory parallel operation In case of correctable errors, switching to spare memory rank Available Memory Available Memory 3 Channel Maximum Memory Capacity 4 3 4 Redundant memory - 1/2(8GB RDIMM), 3/4(16GB RDIMM), 7/8(32GB LRDIMM) or 3/4(64GB LRDIMM) of physical memory 1/2 of physical memory 4 4 4 512GB(8GB RDIMM) 1024GB(16GB RDIMM) 2048GB(32GB LRDIMM) 4096GB(64GB LRDIMM) 256GB(8GB RDIMM) 768GB(16GB RDIMM) 1792GB(32GB LRDIMM) 3072GB(64GB LRDIMM) 256GB(8GB RDIMM) 512GB(16GB RDIMM) 1024GB(32GB LRDIMM) 2048GB(64GB LRDIMM) ECC, DDDC ← ← Data Correction Notes Memory Mirroring under Lockstep Mode RDIMM and LRDIMM cannot be mixed RDIMM and LRDIMM cannot be mixed RDIMM and LRDIMM cannot be mixed 4 memory channels per Memory Riser Card All DIMMs have the same capacity Customized Configuration Service (at the Server Delivery) Product Name/Description Part Number Customized Service: Distribution Mode for COPT NE3300-SV101 NOTE: This service can be ordered only for A2040b COPT Model and up to one item (service) can be ordered per one server. With this service, according to the change of the location of MR, memory location can be changed from the standard BTO Configuration. When allocating enabled CPU cores to all CPU (distributed), this service is recommended to use so that MR and Memory can be distributed, too. Please refer to “Memory” of “Reference” section for the details. NEC Corporation Revision 11.0 – December 2015 23 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3.2.1 Independent Mode (only) No. of Available Slot: Max. 4 sets (8x DIMMs) per Memory Riser Card Category Product Name/Description Part Number Registered DIMM (RDIMM) 1600 MHz 16GB MEM (2 x 8GB RDIMM) 2x 8GB Registered DIMM, DDR3L-1600(PC3L-12800), ECC NE3302-H010F NE3302-H011F Load Reduced DIMM (LRDIMM) 1600 MHz 32GB MEM (2x16GB RDIMM) 2x 16GB Registered DIMM, DDR3L-1600(PC3L-12800) , ECC 64GB MEM (2x32GB LRDIMM) 2x 32GB Load Reduced DIMM, DDR3L-1600(PC3L-12800) , ECC 128GB MEM (2x64GB LRDIMM) 2x 64GB Load Reduced DIMM, DDR3L-1333(PC3L-10600) , ECC 1066 MHz NE3302-H012F NE3302-H013F NOTE: Not-preinstalled. Need to order at least 1 set (2x DIMM) For higher memory performance, same type of memory is recommended to be used by every 2 sets (4x DIMM) in one Memory Riser Card. RDIMM and LRDIMM cannot be mixed in a server NEC Corporation Revision 11.0 – December 2015 24 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3.2.2 Lockstep Mode (only) No. of Available Slot: Max. 4 sets (8x DIMMs) per Memory Riser Card Category Product Name/Description Part Number Registered DIMM (RDIMM) 1600 MHz 16GB MEM (2 x 8GB RDIMM) 2x 8GB Registered DIMM, DDR3L-1600(PC3L-12800), ECC NE3302-H010F NE3302-H011F Load Reduced DIMM (LRDIMM) 1600 MHz 32GB MEM (2x16GB RDIMM) 2x 16GB Registered DIMM, DDR3L-1600(PC3L-12800) , ECC 64GB MEM (2x32GB LRDIMM) 2x 32GB Load Reduced DIMM, DDR3L-1600(PC3L-12800) , ECC 128GB MEM (2x64GB LRDIMM) 2x 64GB Load Reduced DIMM, DDR3L-1333(PC3L-10600) , ECC 1066 MHz NE3302-H012F NE3302-H013F NOTE: Not-preinstalled. Need to order at least 1 set (2x DIMM) For higher memory performance, same type of memory is recommended to be used by every 2 sets (4x DIMM) in one Memory Riser Card. RDIMM and LRDIMM cannot be mixed in a server NEC Corporation Revision 11.0 – December 2015 25 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3.2.3 Memory Rank Sparing No. of Available Slot: Max. 2 sets (8x DIMMs) per Memory Riser Card Product Name/Description Part Number 32GB MEM for Memory Rank Sparing (4 x 8GB RDIMM) 4x 8GB Registered DIMM, DDR3L-1600(PC3L-12800), ECC 64GB MEM for Memory Rank Sparing (4 x 16GB RDIMM) 4x 16GB Registered DIMM, DDR3L-1600(PC3L-12800), ECC 128GB MEM for Memory Rank Sparing (4 x 32GB LRDIMM) 4x 32GB Load Reduced DIMM, DDR3L-1600(PC3L-12800), ECC 256GB MEM for Memory Rank Sparing (4 x 64GB LRDIMM) 4x 32GB Load Reduced DIMM, DDR3L-1333(PC3L-10600), ECC NE3302-H020F NE3302-H021F NE3302-H022F NE3302-H023F NOTE: Not-preinstalled. Need to order at least 1 set (4x DIMM) RDIMM and LRDIMM cannot be mixed in a server Logical Memory Capacity at Memory Rnak Sparing (ex. Using the Same Capacity DIMMs) Physical Memory Capacity No. of DIMM 8GB RDIMM 16GB RDIMM 32GB LRDIMM 64GB LRDIMM 4 16GB 48GB 112GB 192GB 8 32GB 96GB 224GB 384GB 12 48GB 144GB 336GB 576GB 16 64GB 192GB 448GB 768GB 20 80GB 240GB 560GB 960GB 24 96GB 288GB 672GB 1152GB 28 112GB 336GB 784GB 1344GB 32 128GB 384GB 896GB 1536GB 36 144GB 432GB 1008GB 1728GB 40 160GB 480GB 1120GB 1920GB 44 176GB 528GB 1232GB 2122GB 48 192GB 576GB 1344GB 2304GB 52 208GB 624GB 1456GB 2496GB 56 224GB 672GB 1568GB 2688GB 60 240GB 720GB 1680GB 2880GB 64 256GB 768GB 1792GB 3072GB NEC Corporation Revision 11.0 – December 2015 26 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3.2.4 Memory Mirroring No. of Available Slot: Max. 2 sets (8x DIMMs) per Memory Riser Card Product Name/Description Part Number 32GB MEM for Memory Mirroring (4 x 8GB RDIMM) 4x 8GB Registered DIMM, DDR3L-1600(PC3L-12800), ECC 64GB MEM for Memory Mirroring (4 x 16GB RDIMM) 4x 16GB Registered DIMM, DDR3L-1600(PC3L-12800), ECC 128GB MEM for Memory Mirroring (4 x 32GB LRDIMM) 4x 32GB Load Reduced DIMM, DDR3L-1600(PC3L-12800), ECC 256GB MEM for Memory Mirroring (4 x 64GB LRDIMM) 4x 32GB Load Reduced DIMM, DDR3L-1333(PC3L-10600), ECC NE3302-H030F NE3302-H031F NE3302-H032F NE3302-H033F NOTE: Not-preinstalled. Need to order at least 1 set (4x DIMM) RDIMM and LRDIMM cannot be mixed in a server NEC Corporation Revision 11.0 – December 2015 27 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Memory Clock DDR3 Memory clock depends on CPU, Memory Configuration, System BIOS settings. Please refer below for the maximum clock. Please refer to “Memory” of “Reference” section for the details. CPU Xeon® E7-4890v2 E7-4870v2 E7-4860v2 E7-8891v2 E7-8893v2 Xeon® E7-4830v2 E7-4820v2 Memory Configuration/Mode Independent Mode Lockstep Mode Independent Mode Lockstep Mode Xeon® E7-4809v2 Independent Mode Lockstep Mode Memory Type Clock No. of DIMMs (per 1CPU) 1.35V 1.5V RDIMM(8, 16GB) Up to 16 1333 MHz 1333 MHz LRDIMM (32GB) Up to 16 1333 MHz 1333 MHz LRDIMM (64GB) Up to 16 - 1066 MHz RDIMM (8, 16GB) Up to 16 1333 MHz 1600 MHz LRDIMM (32GB) Up to 16 1333 MHz 1600 MHz LRDIMM (64GB) Up to 16 - 1066 MHz RDIMM(8, 16GB) Up to 16 1066 MHz 1066 MHz LRDIMM (32GB) Up to 16 1066 MHz 1066 MHz LRDIMM (64GB) Up to 16 - 1066 MHz RDIMM (8, 16GB) Up to 16 1333 MHz 1600 MHz LRDIMM (32GB) Up to 16 1333 MHz 1600 MHz LRDIMM (64GB) Up to 16 - 1066 MHz RDIMM(8, 16GB) Up to 16 1066 MHz 1066 MHz LRDIMM (32GB) Up to 16 1066 MHz 1066 MHz LRDIMM (64GB) Up to 16 - 1066 MHz RDIMM (8, 16GB) Up to 16 1333 MHz 1333 MHz LRDIMM (32GB) Up to 16 1333 MHz 1333 MHz LRDIMM (64GB) Up to 16 - 1066 MHz NOTE: Default Memory voltage setting (at the server delivery) is 1.35V (power saving). Memory voltage can be changed by System BIOS Set-up menu. At Lockstep mode, strongly recommends to change memory voltage to 1.5V by BIOS set-up menu. Memory voltage is automatically 1.5V under the following configuration (cannot set 1.35V) 64GB LRDIMM installed NEC Corporation Revision 11.0 – December 2015 28 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Maximum Memory Capacity Due to x86 architecture and the specifications of supported OS, the available memory capacity changes, as the following list shows: Maximum Memory Capacity supported by each OS 1 32 GB 32 GB 2 TB 2 TB Microsoft Windows Server 2012 Standard 1 Microsoft Windows Server 2012 Datacenter 1 Microsoft Windows Server 2012 R2 Standard 1 Microsoft Windows Server 2012 R2 Datacenter 4 TB 4 TB Red Hat Enterprise Linux 6 (x86_64) 6 TB 2 TB Oracle Linux6/UEK R2 (x86_64) 6TB 2 TB VMware ESXi 5.1 2 2 TB 2 TB VMware ESXi 5.5 2 4 TB 2 TB VMware ESXi 6.0 3 6 TB 2 TB Microsoft Windows Server 2008 R2 SP1 Standard 1 Microsoft Windows Server 2008 R2 SP1 Enterprise 1 Microsoft Windows Server 2008 R2 SP1 Datacenter 1 1 Max. Memory Capacity for this Server The Maximum Memory Capacity when using Hyper-V: Windows Server 2008 R2 SP1 Standard: 32GB Windows Server 2008 R2 SP1 Enterprise/Datacenter: 1TB Windows Server 2012, Windows Server 2012 R2: 4TB 2 The Maximum Memory Capacity for virtual machine: 1TB 3 The Maximum Memory Capacity for virtual machine: 4TB NEC Corporation Revision 11.0 – December 2015 29 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 4 Internal Disk Drives 4.1 RAID Configuration RAID0/1/5/6/10/50/60 is supported. 2 kinds of RAID Controller are supported; with 1GB or 512MB cache. With 1 RAID Controller configuration, max. 8 internal drives can be connected per one RAID Controller. With 2 RAID Controller configuration, max. 4 internal drives can be connected per one RAID Controller. Controller RAID No. of Disk Capacity Hot Spare NE3303-168 or NE3303-173 RAID 0 (striping) 1~8 Drive Capacity x No. of Drive N RAID 1 (mirroring) 2 Drive Capacity x No. of Drive / 2 Y RAID 5 (parity) 3~8 Drive Capacity x (No. of Drive-1) Y RAID 6 (double parity) 3~8 Drive Capacity x (No. of Drive-2) Y RAID 10 (RAID1 + RAID0) 4/6/8 Drive Capacity x No. of Drive / 2 Y RAID 50 (RAID5 + RAID0) 6/8 Drive Capacity x (No. of Drive-2) Y RAID 60 (RAID6 + RAID0) 6/8 Drive Capacity x (No. of Drive-4) Y NOTE: Needs to order RAID Controller to configure internal drives For RAID Configuration, same type of internal drives need to be ordered within one RAID group (pack) Multiple RAID group can be configured by one RAID Controller. In case of RAID1, 4 groups at maximum. Different capacity/rotation speed/disk type of internal drives can be mixed in different RAID groups. When configuring hot-spare disks, need to use same type of internal disk for the RAID group. All internal drives are same type, Global Hot Spare can be available. When mixing different capacity/rotation speed/disk type drives, need to use Dedicated Hot Spare per RAID group. With 2 RAID Controller configuration, max. 4 internal drives can be connected per one RAID controller. Therefore, RAID50/60 is not available, with 2 RAID Controller configuration, With 2 RAID Controller configurations, RAID cannot be configured among internal drives under different RAID Controllers. Please refer to “Internal Drive” of “Reference” section for the details about Internal Drive: Priority/Order of Installatioin. NEC Corporation Revision 11.0 – December 2015 30 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 1x RAID Controller Configuration 1GB Cache/Flash 4.2.1 SAS HDD/SSD 512MB Cache/Battery 4.2.2 SAS HDD/SSD 2x RAID Controller Configuration 5 年目 1GB Cache/Flash 4.2.4 SAS HDD/SSD 512MB Cache/Battery 4.2.5 SAS HDD/SSD NEC Corporation Revision 11.0 – December 2015 31 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 4.2 Internal Drive Configuration For RAID Configuration, same type of internal drives need to be ordered within one RAID group (pack) With 1 RAID Controller configuration, different HDDs, SDDs or HDD and SSD cannot be configured in the BTO. When mixing these drives, please refer to the section “Internal Disk” at “References”. RAID 0/1/5/6/10 can be configured at BTO Configuration. For RAID 50/60, need to configure after the delivery. nd th nd With 2 RAID Controller configuration, the 2 RAID Controller and 5 and more HDDs under the 2 RAID Controller cannot be configured at BTO Configuration. With 2 RAID Controller configuration, RAID cannot be configured between internal drives under different RAID Controllers. The delivery lead time of SSD is longer than the others. Please contact to our sales representative for the delivery. 4.2.1 1x RAID Controller (1GB Cache/Flash) Configuration Category Product Name/Description Part Number Controller (Need to order 1) RAID Controller (1GB, RAID 0/1/5/6/10/50/60) LSI MegaRAID SAS 9270CV-8i (with CV) RAID0/1/5/6/10/50/60, 1GB Cache, Internal 8 port (4x2 connector), PCIe 3.0(x8), SAS 6Gb/s, Flash Back-up Unit included SAS Cable 1 x mini-SAS to 1 x mini-SAS, x2 2.5-inch HDD Cage 8x 2.5-inch, Drive Bay, Hot-Plug supported 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 450GB HDD 1x450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 900GB HDD 1x 900 GB SAS HDD, 2. 5-inch, 6Gb/s, 10,000 rpm 512B sector 1.2TB HDD 1x1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 146.5GB HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 200GB SSD (*CTO*) 1x 200 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector 400GB SSD (*CTO*) 1x 400 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector NE3303-168 Cable HDD Cage Internal Drives (Max. 8) SAS HDD SAS SSD (eMLC) (included) (included) NE3350-301 NE3350-322 NE3350-304 NE3350-332 NE3350-408 NE3350-303 NE3350-331 NE3350-711F NE3350-712F NOTE: Need to order at least 1 internal drive. (*CTO*) CTO categorized item; lead time for delivery is different from other item. NEC Corporation Revision 11.0 – December 2015 32 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 4.2.2 1x RAID Controller (512MB Cache) Configuration Category Product Name/Description Part Number Controller (Need to order 1) RAID Controller (512MB, RAID 0/1/5/6/10/50/60) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 512MB Cache, Internal 8 port (4x2 connector), PCIe 3.0(x8), SAS 6Gb/s Battery Back-up Unit (for NE3303-173) Battery for LSI MegaRAID SAS /9272-8i, 600mm Battery Cable attached SAS Cable 1 x mini-SAS to 1 x mini-SAS, x2 2.5-inich HDD Cage 8x 2.5-inch, Drive Bay, Hot Plug supported 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 450GB HDD NE3303-173 Battery Cable HDD Cage Internal Drives (Max. 8) SAS HDD NE3303-153 (included) (included) NE3350-301 NE3350-322 1x450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 600GB HDD NE3350-304 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 900GB HDD NE3350-332 1x 900 GB SAS HDD, 2. 5-inch, 6Gb/s, 10,000 rpm 512B sector 1.2TB HDD NE3350-408 1x1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 146.5GB HDD NE3350-303 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 300GB HDD NE3350-331 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector SAS SSD (eMLC) 200GB SSD (*CTO*) 1x 200 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector 400GB SSD (*CTO*) NE3350-711F NE3350-712F 1x 400 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector NOTE: Need to order at least 1 internal drive. (*CTO*) CTO categorized item; lead time for delivery is different from other item. NEC Corporation Revision 11.0 – December 2015 33 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 4.2.3 2x RAID Controller (1GB Cache/Flash) Configuration Category Product Name/Description Part Number Controller (Need to order 2) RAID Controller (1GB, RAID 0/1/5/6/10/50/60) LSI MegaRAID SAS 9270CV-8i (with CV) RAID0/1/5/6/10/50/60, 1GB Cache, Internal 8 port (4x2 connector), PCIe 3.0(x8), SAS 6Gb/s, Flash Back-up Unit included SAS Cable 1 x mini-SAS to 1 x mini-SAS, x2 2.5-inch HDD Cage 8x 2.5-inch, Drive Bay, Hot Plug supported 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 450GB HDD 1x450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 900GB HDD 1x 900 GB SAS HDD, 2. 5-inch, 6Gb/s, 10,000 rpm 512B sector 1.2TB HDD 1x1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 146.5GB HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 200GB SSD (*CTO*) 1x 200 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector 400GB SSD (*CTO*) 1x 400 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector NE3303-168 Cable HDD Cage Internal Drives (Max. 8) SAS HDD SAS SSD (eMLC) (included) (included) NE3350-301 NE3350-322 NE3350-304 NE3350-332 NE3350-408 NE3350-303 NE3350-331 NE3350-711F NE3350-712F NOTE: Need to order at leaset 2 internal drives (*CTO*) CTO categorized item; lead time for delivery is different from other item. RAID50/60 is not available due to the limitation of the number of internal disks. RAID configuration is not available between internal drives under different RAID Controllers. RAID settings at the server delivery are done only to the internal disk drives at Slot #0 to Slot #3. nd th Not configured into the server (not BTO) for the 2 RAID Controller and 5 and beyond internal disk drives. NEC Corporation Revision 11.0 – December 2015 34 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 4.2.4 2x RAID Controller (512MB Cache) Configuration Category Product Name/Description Part Number Controller (Need to order 2) RAID Controller (512MB, RAID 0/1/5/6/10/50/60) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 512MB Cache, Internal 8 port (4x2 connector), PCIe 3.0(x8), SAS 6Gb/s Battery Back-up Unit (for NE3303-173) Battery for LSI MegaRAID SAS /9272-8i, 600mm Battery Cable attached SAS Cable 1 x mini-SAS to 1 x mini-SAS, x2 2.5-inch HDD Cage 8x 2.5-inch, Drive Bay, Hot Plug supported 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 450GB HDD 1x450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 900GB HDD 1x 900 GB SAS HDD, 2. 5-inch, 6Gb/s, 10,000 rpm 512B sector 1.2TB HDD 1x1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 512B sector 146.5GB HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 512B sector 200GB SSD (*CTO*) 1x 200 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector 400GB SSD (*CTO*) 1x 400 GB SAS SSD, eMLC, 2.5 型, 6Gb/s 512B sector NE3303-173 Battery Cable HDD Cage Internal Drives (Max. 8) SAS HDD SAS SSD (eMLC) NE3303-153 (included) (included) NE3350-301 NE3350-322 NE3350-304 NE3350-332 NE3350-408 NE3350-303 NE3350-331 NE3350-711F NE3350-712F NOTE: Need to order at least 2 internal drives (*CTO*) CTO categorized item; lead time for delivery is different from other item. RAID50/60 is not available due to the limitation of the number of internal disks. RAID configuration is not available between internal drives under different RAID Controllers. RAID settings at the server delivery are done only to the internal disk drives at Slot #0 to Slot #3. nd th Not configured into the server (not BTO) for the 2 RAID Controller and 5 and beyond internal disk drives. NEC Corporation Revision 11.0 – December 2015 35 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 5 Optical Drive Up to 1 Optical Drive internal) can be connected Category Product Name/Description Part Number Internal Internal DVD-ROM Drive Slim DVD-ROM Drive, SATA Internal DVD Super Multi Drive Slim DVD Super Multi drive NE3351-100 NE3351-107 NOTE: - Supported OS: Windows Server® 2008R2 and 2012 NOTE: Not pre-installed. Needs to order either Internal DVD-ROM Drive or Internal DVD Super Multi Drive for server maintenance and/or OS installation purpose: NEC Corporation Revision 11.0 – December 2015 36 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 6 PCI Card Please refer to “Available Slots” of “References” section regarding PCI Slots; Available Slots and Installation Limitations PCI Card Customized Configuration Service Product Name/Description Part Number Customized Service: PCI Cards NE3300-SV401 NOTE: When requiring different PCI cards configuration from the standard BTO Configuration at the server delivery, needs to order this customized service. Please order this customized service when no HDD is included in the ordered configuration for FC SAN boot. Please refer to PCI Card: Priority/Order of Installation for installation rules at BTO configuration. 6.1 Network Interface Controller Category Product Name/Description Part Number GbE 1000BASE-T Adapter (1 port)) Broadcom BCM5718 PCIe 2.0(x4) (Performance: PCIe 2.0(x1)) Low Profile 1000BASE-T Adapter (2 port) Broadcom BCM5718 PCIe 2.0(x4) (Performance: PCIe 2.0(x1)) Low Profile 1000BASE-T Adapter (4 port) Broadcom BCM5719 PCIe 2.0(x4), Low Profile NOTE: - Network cables with RJ-45 plug covers cannot be used. NE3304-138 10GBASE Adapter (SFP+/2ch) Broadcom NetXtreme II BCM57711 10G SFP+ Dual Port Network Interface Card PCIe 2.0(x8), Low Profile NOTE: - NE3304-129 (SFP+ Module (10G-SR)) needs to be ordered per one port (max. 2) - Connection with Twinax cable is available. Please refer to the Users guide for the validated cable SFP+ Module (10G-SR) 1 x SFP+ Module for NE3304-128 NE3304-128 10GbE NE3304-132 NE3304-133 NE3304-129 NOTE: Network Interface Controller not pre-installed. Needs to order at least 1 card. WOL (Wake On LAN) / PXE (Preboot eXecution Environment) boot is supported by 1000BASE-T Adapter (1 port) (NE3304-138) and 1000BASE-T Adapter (2 port) (NE3304-132. When booting OS by PXE boot, please select IPv4 for network settings. NEC Corporation Revision 11.0 – December 2015 37 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NIC Teaming feature – NIC Teaming and bonding features NIC Teaming and bonding features are available with this server to provide network redundancy and load balancing for higher network reliability and optimized network loads. Under Windows Server 2008 R2 SP1 environment, teaming feature is supported with BASP (Broadcom Advanced Server Program). Under Windows Server 2012 (and later) and Linux environement, network redundancy is supported with Taming/Bonding functions supported by OS. See the table below for supported network interfaces, operation mode and number of teams. ◆Windows Teaming (1) Windows Server 2008 R2 SP1 Network Interface NE3304-138/-132/-133 (1000BASE) Operation Mode NE3304-128 (10GBASE-SR) Configuration Smart Load Balancing and Failover (without Standby Member feature) Smart Load Balancing (Auto-Failback Disable) (with Standby Member feature) FEC/GEC Generic Trunking Smart Load Balancing and Failover (without Standby Member feature) Smart Load Balancing (Auto-Failback Disable) (with Standby Member feature) FEC/GEC Generic Trunking Number of Teams 4 ports in on card 4 ports among multiple cards Up to 4 ports per one team Up to 4 teams per one system 2 ports in one card 2 ports among multiple cards Up to 2 ports per one team Up to 4 teams per one system NOTE: Teaming with one port shared among multiple teams: Not supported Teaming between 1000BASE-T card and 10GBASE-SR card: Not supported Teaming is NOT available when using Windows Server 2008 R2 SP1 ServerCore Can mix 1000BASE-T teaming and 10GBASE-SR teaming within one system. In this case, up to 4 teams are supported per one system. In case of using 10GBASE-SR: Needs to set less than 4000byte for Jumbo frame, in case of Flow Control set other than “Disabled” Teaming of the port using iSCSI: Not supported (2) Windows Server 2012 (and later) Network Interface NE3304-138/-132/-133 (1000BASE-T) NE3304-128 (10GBASE-SR) Operation Mode Generic or static Teaming Dynamic teaming Switch-independent Configuration 4 ports in on card 4 ports among multiple cards 2 ports in one card 2 ports among multiple cards Number of Teams Up to 4 ports per one team Up to 16 teams Up to 2 ports per one team Up to 8 teams NOTE: Teaming with one port shared among multiple teams: Not supported Teaming between 1000BASE-T card and 10GBASE-SR card: Not supported Teaming of the port using iSCSI: Not supported NEC Corporation Revision 11.0 – December 2015 38 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b ◆Linux Bonding Network Interface Operation Mode Configuration NE3304-138/-132/-133 (1000BASE-T) Recommend: active-backup (fault-tolerance) NE3304-128 (10GBASE-SR) Recommend: active-backup (fault-tolerance) Number of Bonding 2 ports in one card 2 ports among multiple cards 2 ports in one card 2 ports among multiple cards Up to 2 ports per one bonding Up to 16 teams Up to 2 ports per one bonding Up to 8 teams NOTE: Teaming between 1000BASE-T card and 10GBASE-SR card: Not supported Concatct to our sales representative for other than Active-backup Can mix 1000BASE-T bonding and 10GBASE-SR bonding within one system 6.2 Using iSCSI (for data usage) Please refer to iStorage web site regarding the connection to iStorage Series via iSCSI, and to EXPRESSCLUSTER web site for cluster configuration. See the table below for supported network interface and OS combinations. Network Interface 10GbE NE3304-128 Operating System Windows Server 2008 R2 SP1/ Windows Server 2012 / Windows Server 2012 R2 /RHEL / VMware RHEL : Red Hat Enterprise Linux NOTE: NIC Teaming/Bonding features are not supported on iSCSI interfaces. SAN Boot: please contact to our sales representative for details. When booting OS by iSCSI, please select IPv4 for network settings. NEC Corporation Revision 11.0 – December 2015 39 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 6.3 External Storage Controller 6.3.1 RAID Controller Category Product Name/Description Controller External RAID Controller (1GB, RAID 0/1/5/6/10/50/60) LSI MegaRAID SAS 9286CV-8e RAID0/1/5/6/10/50/60, 1GB Cache, External 8 port (4x2 connector), PCIe 3.0(x8), SAS 6Gb/s, Low Profile Flash Backup Unit Flash Backup Unit (for NE3303-H001) Backup Unit Part Number NE3303-H001 NE3303-H002 NOTE: This External RAID Controller [NE3303-H001] can connect to NEC’s Disk Expansion Unit (2U [N8192-101][N8192-102]). ・SAS Cable (2m): [K410-191(02)] ・Disk Expansion Unit can be placed just above or just below the server. BTO configuration at the server delivery does NOT include RAID configuration. Please do RAID configuration by using utility setting. By using Flash Backup Unit, Write Back is available. When configuring Flash Backup Unit, the External RAID Controller is not BTO configured at the server delivery. In order to configure Flash Backup Unit in BTO, please order NE3300-SV401 (Customized Service: PCI Cards) To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 sith 2x HDDs in order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process. It is recommended to set RAID array configuration drives less than eight in order to minimize the risk of becoming multiple hard drives failure. When using VMware ESXi5.5/6.0, please download the latest SMI-S provider from our web site. NEC Corporation Revision 11.0 – December 2015 40 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 6.3.2 Fibre Channel / SAS Controller Category Product Name/Description Part Number Fibre Channel Fibre Channel Controller (8G/1 port) Emulex LightPulse LPe1250-F8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0(x8), Low Profile Fibre Channel Controller(8G/2 port) Emulex LightPulse LPe12002-M8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0(x8), Low Profile Fibre Channel Controller (16G/1 port) Emulex LightPulse LPe16000B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0(x8), Low Profile / Full Height Not supported with VMware® ESXi 5.1 U2 Fibre Channel Controller (16G/ 2port) Emulex LightPulse LPe16002B2-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0(x8), Low Profile / Full Height Not supported with VMware® ESXi 5.1 U2 SAS Controller LSI SAS9212-4i4e Host Bus Adapter 6Gb/s SAS, PCIe 2.0(x8), Low Profile NE3390-153 SAS NE3390-154 NE3390-157A NE3390-158A NE3303-142 NOTE: Connection to iStorage M Series via SAS under Linux environment: Not supported Please refer to the iStorage website for the supported device and OS by iStorage series Please refer to the EXPRESSCLUSTER web site for cluster configuration Depending on the FibreChannel(FC) link speed, the available cable type and/or length may differ. Please refer to the users guide for the Technical Guide of the Fibre Channel Controller. As 2m cables are used to connect SAS Controller and Device Expansion Unit, the following remarks should be noted when using Device Expansion Unit. Device Expansion Unit (2U): N8141-75 Can be mounted with the space less than 3U with the server (on top or under). ・ When moungint Device Expansion Unit on top or just under the server (within 0U), all devices (1-4) can be connected. ・ When mounting Device Expansion Unit with 1 – 3U space, device 3 and 4 (left side of the Unit in front view / connector 3 and 4 of right side from rear view) can be connected. Among the space between the Device Expansion Unit and the server, the item with less than 660mm in lengh can be mounted. Device Expansion Unit (1U): N8141-48/-74 Can be mounted with the space with 0 - 2U with the server (on top or under). ・ Device 2 (left side of the Unit in front view / connector 2 of right side from rear view) can be connected. ・ When requiring to connect to Device 1 (right side of the Unit in front view / connector 1 of the left side from rear view), please consult with NEC thru the sales representative for the details 3 months before ordering. Device Expansion Unit (1U): N8141-69 Can be mounted with the space with 0 - 2U with the server (on top or under). ・ Device 1 (left side of the Unit in front view / connector 1 of right side from rear view) can be connected. ・ When requiring to connect to Device 2 (right side of the Unit in front view / connector 2 of the left side from rear view), please consult with NEC thru the sales representative for the details 3 months before ordering. ・ NEC Corporation Revision 11.0 – December 2015 41 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 6.4 PCIe SSD Super high speed SSD board to be installed in PCIe slot Product Name/Description Part Number PCIe SSD Adapter (1.1TB) (*CTO*) HGST FlashMAX III Performance 1100GB MLC Card PCIe 2.0(x8), Low Profile Supported OS: Windows Server® 2012, Windows Server® 2012 R2 PCIe SSD Adapter (2.2TB) (*CTO*) HGST FlashMAX III Performance 2200GB MLC Card PCIe 2.0(x8), Low Profile Supported OS: Windows Server® 2012, Windows Server® 2012 R2 NE3318-H002F NE3318-H003F NOTE: (*CTO*) CTO categorized item; lead time for delivery is different from other item. Please contact to our sales representative for the delivery schedule. Warranty provided earlier until reaching to the end of the specified lifetime for re-writhing or until the period defined in the warranty notice. Please check regularly the remained lifetime for re-writing using the utility of this PCIe SSD (FlashMAX® III Manager). 3GB main memory is required per one PCIe SSD Adapter (1.1TB) 4GB main memory is required per one PCIe SSD Adapter (2.2TB) NE3318-H002F and NE3318-H003F cannot be mixed in a server (the previous product, NE3318-H001F cannot be mixed, either.) Max. number of PCIe SSD per server: NE3318-H002F 4 NE3318-H003F 8 Not supporting Server Core. This PCIe SSD is for NEC’s solution set product “Database Solution with Microsoft SQL Server (including “PSAM”, NEC PCIe SSD Appliance for Microsoft® SQL Server®)” with the following condition for use: In order to optimize the system performance, please order the Service Product below, one per each server Supporting Storage Pool/Mirror Volume configuration only Page File not supported Please contact to our sales representative for the use other than the above. PSAM Customized Service Product Name/Description Part Number PSAM Customized Service NE3300-SV406 NEC Corporation Revision 11.0 – December 2015 42 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 7 Other Add-in Components 7.1 Power Supply Unit 7.1.1 Number of Power Supply Unit See the table below for the required number of Power Supply Unit per voltage/configuration/redundancy. Voltage 200V Model A2040b Power Supply Unit # of CPU 1000W 800W No-redundancy N+1 2N 2/3/4 2 3 4 2 2 3 4 3/4 3 4 Not available A2020b 1000W 2 2 3 4 800W 2 3 4 Not available A2010b 1000W 1 2 3 4 800W 1 2 3 4 1000W 1 1 2 2 2/3/4 2 3 4 1/2 2 3 4 3/4 3 4 Not available 2/3 2 3 4 4 3 4 Not available 2 2 3 4 3/4 3 4 Not available 1000W 2 3 4 Not available 800W 2 3 4 Not available 1000W 1 2 3 4 800W 1 2 3 4 A1040b 800W 100V Number of Power Supply Unit A2040b 1000W 800W A2020b A2010b A1040b 1000W 800W 1 1 2 2 2/3 2 3 4 4 3 4 Not available 1/2 2 3 4 3/4 3 4 Not available NOTE: When selecting Power Supply Unit, recommend to consider potential add-on of the optional products in the future. Redundancy can be selectable; no-redundancy, N+1 and 2N: ・N+1: When one Power Supply Unit fails, the operation can continue. ・2N: Configuring 2 power supply groups, each consisting of 1 or 2 power supply unit. When one group fails, the operation can continue with another group. In this case, power supply is redundant between PSU#1 and PSU#2, or PSU#3 and #4. Please configure power supply path appropriately. Hot-plug supported. Can replace Power Supply Unit without stopping the system (under redundant configuration securing enough power during replacement). NEC Corporation Revision 11.0 – December 2015 43 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 7.1.2 Power Supply Unit AC Power Supply Unit Product Name/Description Part Number Power Supply Unit (800W) Hot-plug, 80 PLUS Platinum certified Power Supply Unit (1000W) Hot-plug, 80 PLUS Platinum certified NE3381-87 NE3381-88 NOTE: Up to 4 units can be installed. Power Supply Unit includes Cable Tie to prevent dropping AC cable. Cannot mix different Power Supply Unit Cannot mix 100V/200V in one server Please prepare AC cables compliant to the regulation in each geography. 7.2 Redundant Fan Kit Product Name/Description Part Number Redundant Fan 2x fan module (standard) NOTE: 2 units are installed as standard (no add-on available). Hot-plug supported 7.3 Trusted Platform Module Kit Product Name/Description Part Number Trusted Platform Module Kit Module needed to use Windows BitLocker™ Drive Encryption feature NE3315-19 NOTE: This is to be shipped only at the delivery of the server (cannot be add-on later). When installed in the server, cannot be removed later. Need to enable “TMP Support” in BIOS Set-up Menu to use this item. Need to save “recovery password” for Windows BilLocker Drive Encription, as the password is necessary to recover the data when replacing the hardware in failure. NEC Corporation Revision 11.0 – December 2015 44 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 7.4 Internal Flash Memory Product Name/Description Part Number Internal Flash Memory With this kit, EXPRESSBUILDER can be started from POST. NE3315-07 NOTE: When this flash memory is ordered and shipped with the server, the data in the EXPRESSBUILDER is copied into this kit. When this flash memory is ordered and shipped separately, the data must be copied from the EXPRESSBUILDER DVD to the flash memory after installing it in the server for use. NEC Corporation Revision 11.0 – December 2015 45 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 8 Add-on Components 8.1 17-inch LCD Console Unit Category Drawer w/ KVM Drawer w/o KVM Product Name/Description Part Number Drawer 17-inch LCD Console Drawer (8port) 17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port KVM switch, 1U height, BLACK N8143-106F Cable Switch Unit Connection Cable Set (USB, 1.8m) 1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB, 3m) 3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB, 5m) 5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A 17-inch LCD Console Unit 1U 17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height, 4-pin USB B to 4-pin USB A cable 2 m, PS/2 Y-splitter cable 2m, 15-pin mini D-sub VGA cable 2 m, BLACK K410-118(1A) 17inch LCD Console Drawer (1port) 17-inch LCD, US 103-keys Keyboard with 10-key, Touch pad with 3-button, 1U height, 4-pin USB B to 4-pin USB A cable 1.8 m, Two PS/2 cable 1.8 m, 15-pin mini D-sub VGA cable 1.8 m Keyboard Unit (JP) JP 108-keys Keyboard with 10-key for N8143-84F 17inch LCD Console Drawer (1port) Keyboard Unit (UK) UK 104-keys Keyboard with 10-key, for N8143-84F 17inch LCD Console Drawer (1port) N8140-108F Drawer Keypad NEC Corporation Revision 11.0 – December 2015 K410-118(03) K410-118(05) N8143-105F N8143-109 N8143-111 46 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 8.2 KVM Switch Category Product Name/Description Part Number KVM Switch Server Switch Unit (8Server) 1U USB 8 port KVM Switch, BLACK Switch Unit Connection Cable Set (USB,1.8m) 1.8 m, 1 x 15-pin mini D-sub - 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,3m) 3 m, 1 x 15-pin mini D-sub - 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,5m) 5 m, 1 x 15-pin mini D-sub - 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable 1.8 m 1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x PS/2 N8191-14F Cable Cascading NEC Corporation Revision 11.0 – December 2015 K410-118(1A) K410-118(03) K410-118(05) K410-119(1A) 47 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 8.3 Front Bezel A2040b,A2020b, A2010b Product Name/Description Part Number Front Bezel (A2040b/A2020b/A2010b) NE3446-H001 A1040b Product Name/Description Part Number Front Bezel (A1040b) NE3346-H001 NEC Corporation Revision 11.0 – December 2015 48 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 8.4 Cable Arm With this component at rear side of the server, various cables are compactly combined. Product Name/Description Part Number Cable Arm (70mm) Including slide rail attachment Able to combine around 18 cables (except AC Power Cable, such as LAN, FC and USB) NE3343-H001 Cable Arm (110mm) Including slide rail attachment Able to combine around 32 cables (except AC Power Cable, such as LAN, FC and USB) NE3343-H002 NOTE: Need to use Slide Rail Attachment to use Cable Arm. This makes server depth longer, as shown in the Dimensions. For calculation, considering LAN (UTP: without shield) is φ5mm in diameter at average, 1x FC cable corresponds to 1x LAN cable, 1x SAS cable corresponds to 2x LAN cables, 1x SUV cable corresponds to 4x LAN cables and 1 x USB Cable corresponds to 1 x LAN cable. Table for quick reference: Model A2040b/A2020b/A2010b A1040b Cable Arm (70mm) Cable Arm (110mm) Cable Arm (70mm) Cable Arm (110mm) Max. cable capacity (by no. of LAN cable) 18 32 18 32 Management LAN (mandatory required) 2 2 1 1 SUV Cable *1 (by no. of LAN cable) 4 4 4 4 Opne calbe capacity (byno. Of LAN cable) 12 26 13 27 1 1 x SUV Cable corresponds to 4 x LAN cable. Remarks: With Cable Arm (110mm), the unit with more than 670mm in depth (from the front) cannot be located on top of the server. Otherwise, need to have 1U between the unit and the server. (Please refer to the illustoratinos below.) NEC Corporation Revision 11.0 – December 2015 49 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NEC Corporation Revision 11.0 – December 2015 50 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 8.5 Management Console Specifications Need to prepare a PC for a management console meeting the following requirements: Specifications CPU More than Pentium4 1.3GHz Memory More than 2GB (Memory for OS and browser + memory for Java + more than 1GB) Network 100BASE-TX equivalent and above (bandwidth more than 10Mbps) HDD More than 40GB free space Resolution More than 1152 x 864 Supported browser Windows - Microsoft Internet Explorer 7.0, 8.0, 9.0, 10.0(11 not supported) * with IPv6 - Microsoft Internet Explorer 10.0 Linux - Firefox ESR17 Java Oracle Java JRE7, Oracle Java JRE8 * 32bit version J2SE Runtime Environment Client OS Windows - Windows Vista(SP2) - Windows 7 - Windows 8 - Windows Server 2003 R2 (SP2) - Windows Server 2008 - Windows Server 2008 R2 (SP1) - Windows Server 2012 * with IPv6 - Windows 7 - Windows 8 - Windows Server 2012 Linux - Red Hat Enterprise Linux WS(version 6.0 or later) - Red Hat Enterprise Linux(version 6.0 or later) NOTE: For A2040b/A2020b/A2010b, management console needs to be connected to Management LAN of both MGB#1 and MGB#2. For A1040b, management console needs to be connected to Management LAN of MGB#1 LAN environment/console PC is not pre-installed. Needs to prepare separately. Needs to have a management console in addition to VGA console. Please prepare at least 1 console. Can be shared by multiple servers. NEC Corporation Revision 11.0 – December 2015 51 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b References ■CPU CPU: BTO Configuration Rule CPUs are to be installed in the priority order of CPU1 => CPU2 => CPU3 => CPU4. ■Memory 1. Memory Riser Card: Priority/Order of Installation 1-1.A2040b 1 or 2 Memory Riser Cards are able to be installed per CPU. In case of 4CPU configuration, up to 8 Memory Riser cards are able to be installed The priority/order of instalaltion depends on the models: (1) Standard Model Depending on the number of the installed CPU and the ordered Memory Riser Card, Memory Riser Cards will be installed in the following priority/order. (Need to install at least one Memory Riser Card.) Memory Riser Card Slot # of CPU #1 #2 #3 #4 #5 #6 #7 #8 2 1 3 2 4 - - - - 3 1 4 2 5 3 6 - - 4 1 5 2 6 3 7 4 8 (2) COPT Supported Model: Standard BTO Configuration (Centralized Mode) Depending on the number of the installed CPU and the ordered Memory Riser Card, Memory Riser Cards will be installed in the following priority/order. This priory/order corresponds to the case using “Centralize” for Core Optimization Mode. (Need to install at least one Memory Riser Card.) Memory Riser Card Slot # of CPU NEC Corporation #1 #2 #3 #4 #5 #6 #7 #8 2 1 2 3 4 - - - - 3 1 2 3 4 5 6 - - 4 1 2 3 4 5 6 7 8 Revision 11.0 – December 2015 52 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b (3) COPT Supported Model: With “Customized Service: Distribution Mode for COPT (NE3300-SV101)” is ordered (Decentralized Mode) Depending on the number of the installed CPU and the ordered Memory Riser Card, Memory Riser Cards will be installed in the following priority/order. This priory/order corresponds to the case using “Decentralize” for Core Optimization Mode. (Need to install at least one Memory Riser Card.) Memory Riser Card Slot # of CPU #1 #2 #3 #4 #5 #6 #7 #8 2 1 3 2 4 - - - - 3 1 4 2 5 3 6 - - 4 1 5 2 6 3 7 4 8 1-2.A2020b Up to 8 Memory Riser cards are able to be installed Depending on the number of the ordered Memory Riser Card, Memory Riser Cards will be installed in the following priority/order. (Need to install at least one Memory Riser Card.) Memory Riser Card Slot # of CPU 2 #1 #2 #3 #4 #5 #6 #7 #8 1 3 2 4 5 7 6 8 1-3.A2010b Up to 4 Memory Riser cards are able to be installed Depending on the number of the ordered Memory Riser Card, Memory Riser Card will be installed in the following priority/order. (Need to install at least one Memory Riser Card.) # of CPU 1 Memory Riser Card Slot #1 #2 #3 #4 1 2 3 4 1-4.A1040b 1 or 2 Memory Riser Cards are able to be installed per CPU. In case of 4CPU configuration, up to 8 Memory Riser cards are able to be installed Depending on the number of the installed CPU and the ordered Memory Riser Card, Memory Riser Cards will be installed in the following priority/order. (Need to install at least one Memory Riser Card.) Memory Riser Card Slot # of CPU NEC Corporation #1 #2 #3 #4 #5 #6 #7 #8 1 1 2 - - - - - - 2 1 3 2 4 - - - - 3 1 4 2 5 3 6 - - 4 1 5 2 6 3 7 4 8 Revision 11.0 – December 2015 53 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 2. Memory on the Memory Riser Card (DIMM): Priority/Order of Installation The priority/order to install DIMM on a Memory Riser Card depends on memory configuration. Memory Configuration Mode consists of 2; “Independent Mode” for high performance and “Lockstep Mode” for high availability Under each mode, there are 2 features to improve availability further; “Memory Mirroring” and “Memory Rank Sparing”. 2-1. Lockstep Mode “Lockstep Mode” supports Error Detect/Correct toward 2x DRAM failures (DDDC) by having a pair of memory defined among 2x memory channels (CH0 and CH1 or CH2 and CH3) operating in parallel. To use this mode, need to order memory set including 2 DIMMs per set. NOTE: Cannot mix RDIMM and LRDIMM in a server Lockstep Mode is a standard setting at the server delivery. For DIMM installation priority/order, (1) to install larger DIMM first, and (2) to install DIMMs to the sockets in the priority/order shown in the figure below. 2-2. Independent Mode “Independent Mode” provides more performance by having 4 memory channels operate independently. This supports Error Detect/Correct toward 1x DRAM failure (SDDC). To use this mode, need to order memory set including 2 DIMMs per set. NOTE: Cannot mix RDIMM and LRDIMM in a server Lockstep Mode is a standard setting at the server delivery. To use Independent Mode, need to change the mode from BIOS set-up menu. For DIMM installation priority/order, (1) to install larger DIMM first, and (2) to install DIMMs to the sockets in the priority/order shown in the figure below. Otherwise, memory might not be able to be identified. DIMM Installation Order for Independent Mode (only) /Lockstep Mode (only) NEC Corporation Revision 11.0 – December 2015 54 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 2-3. Memory Mirroring “Memory Mirroring” provide redundancy by writing the same data into 2x memory among different memory buffers on a Memory Riser Card. To use this feature, need to order memory set including 4 DIMMs per set Memory Mirroring for each Memory Configuration Mode: Independent Mode: Mirroring between CH0 and CH2, CH1 and CH3 Lockstep Mode: Mirroring between memory pair on CH0 and CH1 AND memory pair on CH2 and CH3 NOTE: Cannot mix RDIMM and LRDIMM in a server When using Memory Mirroring, the available memory capacity becomes half of physical capacity. Lockstep Mode + Memory Mirroring is a standard setting at the server delivery. To use Independent Mode, need to change the mode from BIOS set-up menu. Cannot use both Memory Mirroring and Memory Rank Sparing at the same time. For DIMM installation priority/order, (1) to install larger DIMM first, and (2) to install DIMMs to the sockets in the priority/order shown in the figure below. DIMM Installation Order for Memory Mirroring NEC Corporation Revision 11.0 – December 2015 55 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 2.4 Memory Rank Sparing “Memory Rank Sparing” is the feature to keep operation; with having one of two memory ranks in one memory channel as a spare, when detecting errors at memory rank in operation, automatically switching to spare rank. To use this feature, need to order memory set including 4 DIMMs per set Memory Rank Sparing for each Memory Configuration Mode: Independent Mode: One of two memory rank in each memory channel is assigned as a spare memory rank Lockstep Mode: Either a memory pair on CH0 and CH1 OR a memory pair on CH02 and CH03 is assigned as a spare memory rank. NOTE: Cannot mix RDIMM and LRDIMM in a server When using Memory Rank Sparing, the available memory capacity reduces by the capacity of spare memory rank: Available Memory Capacity: 1/2 of physical memory (8GB RDIMM) 3/4 of physical memory (16GB RDIMM) 7/8 of physical memory (32GB LRDIMM) 3/4 of physical memory (64GB LRDIMM) Lockstep Mode + Memory Rank Sparing is a standard setting at the server delivery. To use Independent Mode, need to change the mode from BIOS set-up menu. Cannot use both Memory Mirroring and Memory Rank Sparing at the same time. For DIMM installation priority/order, (1) to install larger DIMM first, and (2) to install DIMMs to the sockets in the priority/order shown in the figure below. DIMM Installation Order for Memory Rank Sparing NEC Corporation Revision 11.0 – December 2015 56 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 3. Memory in the Server: Priority/Order of Installation Basic Rule: When mixing different capacity of memory, will install larger capacity memory first. In a Memory Riser Card, memory installed according to the rule shown in the previous section. 3-1. A2040b (1) Standard Model Memory will be installed equally among each Memory Riser Card. (2) COPT Supported Model: Standard BTO Configuration (Centralized Mode) Memory will be installed to the first younger 2 Memory Riser Cards. Follows the same rule afterwards, (3) COPT Supported Model: With “Customized Service: Distribution Mode for COPT (NE3300-SV101)” is ordered (Decentralized Mode) Memory will be installed equally among each Memory Riser Card. 3-2. A2020b Memory will be installed equally to Memory Riser Card #1 to #4, then move to Memory Riser Card #5 to #8. 3-3. A2010b Memory will be installed equally to Memory Riser Card #1 to #2, then move to Memory Riser Card #3 to #4. 3-4. A1040b Memory will be installed equally among each Memory Riser Card. NEC Corporation Revision 11.0 – December 2015 57 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b ■Internal Drive Internal Drive: Priority/Order of Installation At the initial server delivery, internal drives are installed with the following priority/order. If the ordered configuration is not in the scope of the rule, the drive will be delivered as not configured. Front View (lower) Slot 0 Slot 2 Slot 1 Slot 3 Slot 4 Slot 6 Slot 5 Slot 7 ◆1x RAID Controller ・Slot 0 => Slot 1 => Slot 2 => Slot 3 => Slot 4 => Slot 5 => Slot 6 => Slot 7 ◆2x RAID Controller For the 1 st RAID Controller ・Slot 0 => Slot 1 => Slot 2 => nd For the 2 RAID Controller Slot3 ・Slot 4 => Slot 5 => Slot 6 => Slot 7 nd However, the 2 RAID Controller and the drives under the controller are not installed (configured) at the server delivery. Conditions to Mix Internal Drives Mixing SSDs with different capacity or mixing HDDs with the same rotation speed is supported in the BTO configuration. Mixing HDDs with different rotation speed and mixing HDD and SSC is NOT supported in the BTO configuration. Cannot mix within the same RAID group (pack) When defining hot spare disk under mixed drive configuration, need to set Dedicated Hot Spare per RAID group. Global Hot Spare is not available. Please refer to the following for further details. With different internal drives For 1x RAID Controller, 2 kinds of HDDs or HDD/SSD can be mixed. When SSD/HDD mixed, SSDs are installed first according to the above priority/order, then HDDs are installed in the remaining drive bays. When SSDs with different capacity are mixed, larger SSDs are installed first. When HDDs with different rotation speed, higher speed HDDs are installed first. If the speed is the same, smaller capacity HDDs are installed first. NEC Corporation Revision 11.0 – December 2015 58 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NEC Corporation Revision 11.0 – December 2015 59 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Standard RAID Configuration at the Initial Server Delivery Standard RAID configuration for the same type of internal drives at the initial server delivery is as follows RAID 50 and RAID 60 are not supported for BTO configuration Controller (reference section) # of Drive Standard RAID Configuration NE3303-168 or NE3303-173 4.2.1 4.2.2 (up to 8 drives) 1 RAID 0 (Q’ty 1) 2 RAID 1 (Q’ty 2) 3~8 RAID 1 (if the number of drive is odd, will set one spare drive.) 4.2.4 4.2.5 (Up to 4 drives) 1 RAID 0 (Q’ty 1) 2 RAID 1 (Q’ty 2) 3~4 RAID 1 (if the number of drive is odd, will set one spare drive.) (Q’ty 1) NE3303-168 or NE3303-173 (Q’ty 2) NOTE: Up to 4 RAID group (pack) per server nd th 2 RAID Controller (and 5 and later HDDs under it): no RAID Configuration applied Need to order same capacity/rotation speed drives in one group (disk array) for RAID configuration at BTO configuration. Initial settings of RAID Controller is as follows: NE3308-168: Write Back (as Flash Backup Unit included) NE3308-173: Wrhite Through (in case of no additional battery) ・ When needing higher performance, recommend Write Back with additional battery. (Please refer to the manual attached to the RAID Controller for the setting information.) ■Connection to RDX (USB) by Device Expansion Unit Conditions to connect to RDX(USB) When using Device Expansion Unit (1U/2U) with the embedded RDX (USB) [N8151-125/-105], please connect to USB connector on rear side of the server. Not allowed to connect to USB connector of SUB cable. Please use an external USB cable of USB2.0 supported [K410-197(00)] 2m cable is necessary to connect between Device Expansion Unit and USB connector on rear side of the server. Therefore, please be aware of the following restrictions about the location of the Device Expansion Unit: Device Expansion Unit [N8141-75] (2U) ・ Can locate within 3U space from the top or bottom of the server In case of locating directly on top or bottom of the server (within 0U), all devices (device #1-#4) are available. In case of locating within 1-3U space, devices on the left hand side from the front (right connecter #3, #4) from the rear) can be available. Devices within 660mm in depth can be installed between the server and the Device Expansion Unit. Device Expansion Unit [N8141-74/-48] (1U) ・ Can locate within 2U from the top or bottom of the server. ・ Device 2 on the left side from the front (right connecter #2 from the rear) can be available. Device Expansion Unit [N8141-69] (1U) ・ Can locate within 2U from the top or bottom of the server. ・ Device 1 on the left side from the front (right connecter #1 from the rear) can be available. ・ Only HDD cartridge is available as Data Cartridge for Back-up (SSD cartridge is NOT available.) NEC Corporation Revision 11.0 – December 2015 60 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b ■Server Management The EXPRESSSCOPE Engine SP3, integrated into the server (service processor (BMC)), provides superior remote control and system management features listed in the table below. Standard Temperature/ fan/voltage/power/ Degradation (CPU/memory etc.) Hardware configuration information collection Hardware event log collection Boot Monitoring POST/BIOS stall, Booting, OS panic, Shutdown Alerting HW error, Boot error and OS panic (by SNMP, E-mail) Remote KVM (via LAN) POST/BIOS setup, ROM utility Boot screen, Panic screen CUI-based screen (OS console) GUI-based screen (OS console Remote reset/Power on-off/dump Remote power capping BIOS/BMC FW update Remote BIOS setup (partial configuration only) OS shutdown Remote media (CD/DVD/FD/USB) CLP (Command Line Protocol) (DMTF compliant) Remote control via Web browser (multi user login at the same time) Scheduling (without UPS, ESMPRO/SM required) Maintenance EXPRESSSCOPE® Profile Key (Backup/restore BIOS/BMC setup information) Others Set automatic IP address via DNS/DHCP LDAP/Active Directory verification/user control Clock synchronization of main unit and the RTC Access log collection IPv6 supported When master BMC fails, switch to stand-by BMC Hardware Monitoring Remote Control (via LAN) BMC Failover 1 1 1 2 3 Industry standard 1 2 3 IPMI 2.0 Not supported under VMware environment IPv6 is available only for Web console, SMASH-CLP and E-Mail alerting Features to recovery EXPRESSSCOPE Engine SP3 itself. Supoprted only for A2040b/A2020b/A2010b. Reboot required to failover to stand-by BMC. Need to connect master and stand-by BMC to 2 Management LAN interface from 2 Management LAN ports. NEC Corporation Revision 11.0 – December 2015 61 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b ■PCI Slot: Available Slots and Installation Limitations A2040b (including COPT model)/A2020b/A2010b Available Slots PCIe Slot PCI Slot Specifications #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 PCIe 3.0 x4 lane x8 socket 8Gb/s Low Profile x8 lane Max. Number of Cards for Installation x8 lane Available Slot 220mm > Part Number (per CPU configuration) Part Name/Description RAID Controller (1GB, RAID 0/1/5/6/10/50/60) (Card Perf.: PCI Express 3.0(x8)) Y NE3303-173 RAID Controller (512 MB, RAID 0/1/5/6/10/50/60) (Card Perf.: PCI Express 3.0(x8)) Y Y - - - - - NE3303-H001 External RAID Controller (1GB, RAID 0/1/5/6/10/50/60) (Card Perf.: PCI Express 3.0(x8)) Y Y Y Y Y Y Y NE3303-142 SAS Controller (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y NE3390-153 Fiber Channel Controller (1 port) (8Gbps/Optical) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y NE3390-154 Fiber Channel Controller (2port) (8Gbps/Optical) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y NE3390-157A Fiber Channel Controller (1port) (16Gbps/Optical) (Card Perf.: PCI Express 3.0(x8)) Y Y Y NE3390-158A Fiber Channel Controller (2 port) (16Gbps/Optical) (Card Perf: PCI Express 3.0(x8)) Y Y NE3304-138 1000BASE-T Adapter (1 port) (Card Perf.: PCI Express 2.0(x1)) Y NE3304-132 1000BASE-T Adapter(2 port) (Card Perf.: PCI Express 2.0(x1)) NE3304-133 NE3303-168 Y - - - - - - - - - Note - - - - - - 4 9 1 2 Total 13 16 - 2 To connect to internal disks Up to 2 Controllers can be installed. 2 Flash Backup Unit included Battery Backup Unit [NE3303-153] can be added - - - - - - - Y*3 Y*3 Y Y Y Y Y Y Y 4 9 11 13 To connect to Disk Expansion Unit Y Y*3 Y*3 Y Y Y Y Y Y Y 4 9 11 13 To connect external device units Y Y Y*3 Y*3 Y Y Y Y Y Y Y 4 9 11 13 Y Y Y - - Y Y Y Y Y Y Y 4 7 11 13 Y Y Y Y - - Y Y Y Y Y Y Y 4 7 11 13 Y Y Y Y Y - - Y Y Y Y Y Y Y 4 7 11 13 Y Y Y Y*1 Y Y Y Y*1 Y Y Y Y Y Y Y 4 9 13 14 For LAN connection Physical Card: PCI Express 2.0(x4) Y Y Y Y Y*1 Y Y Y Y*1 Y Y Y Y Y Y Y 4 9 13 14 For LAN connection Physical Card: PCI Express 2.0(x4) 1000BASE-T Adapter (4 port) (Card Perf.: PCI Express 2.0(x4)) Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 4 9 13 14 For LAN connection LAN cables with RJ-45 plug covers cannot be used NE3304-128 10GBASE Adapter (SFP+/2ch) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y Y - - Y Y Y Y Y Y Y 4 7 11 14 For LAN connection Need to separately order SFP+ Module [NE3304129], when necessary NE3318-H002F PCIe SSD Adapter (1.1TB) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y Y - - Y Y Y Y Y Y Y 4 4 4 4 NE3318-H003F PCIe SSD Adapter (2.2TB) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y Y - - Y Y Y Y Y Y Y 4 7 8 8 Flash Backup Unit [NE3303-H002] can be added *2 For external Fiber Channel connection 16 cannot be mixed *1 WOL (Wake On LAN) / PXE (Preboot eXecution Environment) boot supported *2 With Flash Backup Unit installed, External RAID Controller can be installed to PCI Slot#5,#8,#12 and #16 only *3 Used when no more x8 lane PCIe slot available NEC Corporation Revision 11.0 – December 2015 62 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Installation Limitations due to I/O Space Some PCI cards using I/O space has limitation regarding the number of cards to be installed. Please see the tables below. Part Number NE3303-168 NE3303-173 NE3303-H001 NE3303-142 NE3390-153 NE3390-154 NE3390-157 NE3390-158 Part Name/Description RAID Controller (1GB, RAID 0/1/5/6/10/50/60) RAID Controller (512 MB, RAID 0/1/5/6/10/50/60) External RAID Controller (1GB, RAID 0/1/5/6/10/50/60) PCIe Slot # of Available Slot 4 9 13 16 #1 #3 #4 #5 #2 No limitation No limitation No limitation Max. 3 #6 #7 #8 No limitation Max. 3 (Max. 4 *1) Max. 3 (Max. 4 *1) #9 #10 #11 #12 #13 #14 #15 #16 No limitation No limitation No limitation SAS Controller Fibre Channel Controller (1 port) (8Gbps/Optical) Fibre Channel Controller (2port) (8Gbps/Optical) Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2 port) (16Gbps/Optical) NOTE: Please refer to the Users Guide for the details about each card. “Card Perf.” Means the maximum operating performance of the card. If the PCI slot specification is lower than the operation performance of the cards, the card operates according to the specification of the slot. PCI Slot #2 to #9 are hot plug supported. NEC Corporation Revision 11.0 – December 2015 63 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b A1040b Available Slots PCIe Slot PCI Slot Specifications #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 PCIe 3.0 x4 lane x8 socket 8Gb/s Low Profile x8 lane Max. Number of Cards for Installation x8 lane Available Slot 220mm > Part Number Note (per CPU configuration) Part Name/Description 4 NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) (Card Perf.: PCI Express 3.0(x8)) Y Y - - - - - - - - - - - - - - NE3303-173 RAID Controller (512 MB, RAID 0/1/5/6/10/50/60) (Card Perf.: PCI Express 3.0(x8)) Y Y - - - - - - - - - - - - - - NE3303-H001 External RAID Controller (1GB, RAID 0/1/5/6/10/50/60) (Card Perf.: PCI Express 3.0(x8)) Y Y Y Y Y Y Y Y*3 Y*3 Y Y Y Y Y Y NE3303-142 SAS Controller (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y Y Y*3 Y*3 Y Y Y Y Y NE3390-153 Fibre Channel Controller (1 port) (8Gbps/Optical) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y Y Y*3 Y*3 Y Y Y Y NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y Y - - Y Y Y NE3390-157A Fibre Channel Controller (1port) (16Gbps/Optical) (Card Perf.: PCI Express 3.0(x8)) Y Y Y Y Y Y Y - - Y Y NE3390-158A Fibre Channel Controller (2 port) (16Gbps/Optical) (Card Perf.: PCI Express 3.0(x8)) Y Y Y Y Y Y Y - - Y NE3304-138 1000BASE-T Adapter (1 port) (Card Perf.: PCI Express 2.0(x1)) Y Y Y Y Y*1 Y Y Y Y*1 NE3304-132 1000BASE-T Adapter(2 port) (Card Perf.: PCI Express 2.0(x1)) Y Y Y Y Y*1 Y Y Y NE3304-133 1000BASE-T Adapter (4 port) (Card Perf.: PCI Express 2.0(x4)) Y Y Y Y Y Y Y NE3304-128 10GBASE Adapter (SFP+/2ch) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y Y NE3318-H002F PCIe SSD Adapter (1.1TB) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y NE3318-H003F PCIe SSD Adapter (2.2TB) (Card Perf.: PCI Express 2.0(x8)) Y Y Y Y Y 9 Total 13 16 2 To connect to internal disks Up to 2 Controllers can be installed. 2 Flash Backup Unit included 1 2 Y 4 9 12 14 To connect to Disk Expansion Unit Y Y 4 9 12 13 To connect external device units Y Y Y 4 9 12 13 Y Y Y Y 4 7 11 13 Y Y Y Y Y 4 7 11 13 Y Y Y Y Y Y 4 7 11 13 Y Y Y Y Y Y Y 4 9 13 14 For LAN connection Physical Card: PCI Express 2.0(x4) Y*1 Y Y Y Y Y Y Y 4 9 13 14 For LAN connection Physical Card: PCI Express 2.0(x4) Y Y Y Y Y Y Y Y Y 4 9 13 14 For LAN connection LAN cables with RJ-45 plug covers cannot be used Y - - Y Y Y Y Y Y Y 4 7 11 14 For LAN connection Need to separately order SFP+ Module [NE3304129], when necessary Y Y - - Y Y Y Y Y Y Y 4 4 4 4 Y Y - - Y Y Y Y Y Y Y 4 7 8 8 Battery Backup Unit [NE3303-153] can be added Flash Backup Unit [NE3303-H002] can be added *2 For external Fibre Channel connection 16 cannot be mixed *1 WOL (Wake On LAN) / PXE (Preboot eXecution Environment) boot supported *2 With Flash Backup Unit installed, External RAID Controller can be installed to PCI Slot#5,#8,#12 and #16 only *3 Used when no more x8 lane PCIe slot available NEC Corporation Revision 11.0 – December 2015 64 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Installation Limitations due to I/O Space Some PCI cards using I/O space has limitation regarding the number of cards to be installed. Please see the tables below. Part Number NE3303-168 NE3303-173 NE3303-H001 NE3303-142 NE3390-153 NE3390-154 NE3390-157 NE3390-158 Part Name/Description RAID Controller (1GB, RAID 0/1/5/6/10/50/60) RAID Controller (512 MB, RAID 0/1/5/6/10/50/60) External RAID Controller (1GB, RAID 0/1/5/6/10/50/60) PCIe Slot # of Available #1 #3 #4 #5 Slot No limitation 4 No limitation 9 No limitation 13 Max. 3 16 #2 #6 #7 #8 No limitation Max. 4 Max. 4 #9 #10 #11 #12 #13 #14 #15 #16 No limitation No limitation No limitation SAS Controller Fibre Channel Controller (1 port) (8Gbps/Optical) Fibre Channel Controller (2port) (8Gbps/Optical) Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2 port) (16Gbps/Optical) NOTE: Please refer to the Users Guide for the details about each card. “Card Perf.” Means the maximum operating performance of the card. If the PCI slot specification is lower than the operation performance of the cards, the card operates according to the specification of the slot. NEC Corporation Revision 11.0 – December 2015 65 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Installation Limitations for Windows Environment For Windows environment, PCI cards have additional installation limitations as for the number of the cards to be installed, depending on the combination of the PCI cards. Please refer below for the details. In case of using CPU SKU with small number of thread and require large I/O space, Hyper Threading is recommended to “ON” (default setting) in order to avoid performance decrease due to lack of I/O space. Windows Hyper-Threading = ON Product Code CPU NE3303-168 A2040b & A1040b Model Xeon E7-4890v2 Xeon E7-4870v2 Xeon E7-4860v2 Xeon E7-8891v2 Xeon E7-4830v2 Xeon E7-4820v2 Xeon E7-8893v2 Xeon E7-4809v2 Name/Description RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3390-157A Fibre Channel Controller (1port) (16Gbps/Optical) NE3390-158A Fibre Channel Controller (2port) (16Gbps/Optical) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) Same as "Available Slots Matrix (general)" NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) Max. # of slots *1 16 16 16 16 16 *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) The followins is the guide line of the number of cores which should be enabled at A2040b COPT model. A2040b COPT Model CPU Xeon E7-4890v2 Xeon E7-4870v2 Name/Description 4CPU 3CPU 2CPU Max. # of slots *2 16 Xeon E7-8891v2 Xeon E7-4820v2 Xeon E7-4830v2 # of Cores needed to be enabled *1 23 cores or more 18 cores or more 12 cores or more 16 16 16 Xeon E7-4860v2 Xeon E7-8893v2 Xeon E7-4809v2 16 *1 By using PCI card spending less I/O space, the number of Cores needed to be enabled becomes less. *2 Max. number of slots depends on the number of CPU: Max. slot (2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) NEC Corporation Revision 11.0 – December 2015 66 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Product Code A2020b Model CPU Xeon E7-4890v2 Xeon E7-4870v2 Xeon E7-4860v2 Xeon E7-8891v2 Xeon E7-4830v2 Xeon E7-4820v2 Xeon E7-8893v2 Xeon E7-4809v2 Name/Description RAID Controller NE3303-168 (1GB, RAID 0/1/5/6/10/50/60) RAID Controller NE3303-173 (512MB, RAID 0/1/5/6/10/50/60) RAID Controller NE3303-H001 (1GB, RAID 0/1/5/6/10/50/60) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) Same as "Available Slots Matrix (general)" NE3390-157A NE3390-158A NE3390-153 NE3390-154 NE3303-142 Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2port) (16Gbps/Optical) Fibre Channel Controller (1port) (8Gbps/Optical) Fibre Channel Controller (2port) (8Gbps/Optical) SAS Controller (6Gb/s SAS) NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) Max. # of slots *1 16 16 14 *2 11 *2 8 *2 Xeon E7-4820v2 Xeon E7-8893v2 Xeon E7-4809v2 *1 Max. number of slots is 16. *2 By using PCI card spending less I/O space, the max. number will be increased to 16. Product Code A2010b Model CPU Xeon E7-4890v2 Xeon E7-4870v2 Xeon E7-4860v2 Xeon E7-8891v2 Xeon E7-4830v2 Name/Description NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) Same as "Available Slots Matrix (general)" NE3390-157A NE3390-158A NE3390-153 Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2port) (16Gbps/Optical) Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) NE3703-301 PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) Max. # of slots *1 9 9 7 *2 6 *2 4 *2 *1 Max. number of slots is 9. *2 By using PCI card spending less I/O space, the max. number will be increased to 9. NEC Corporation Revision 11.0 – December 2015 67 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Windows Hyper-Threading = OFF Product Code CPU NE3303-168 A2040b & A1040b Model Xeon E7-4890v2 Xeon E7-4870v2 Xeon E7-4860v2 Xeon E7-8891v2 Xeon E7-4830v2 Xeon E7-4820v2 Xeon E7-8893v2 Xeon E7-4809v2 Name/Description RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3304-133 1000BASE-T Adapter (4port) Same as "Available Slots Matrix (general)" Max. 8 ports in total per CPU NE3304-128 10GBASE Adapter (SFP+/2ch) NE3390-157A Fibre Channel Controller (1port) (16Gbps/Optical) NE3390-158A Fibre Channel Controller (2port) (16Gbps/Optical) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) Same as "Available Slots Matrix (general)" Max. 2 ports in total per CPU Max. 1 port in total per CPU Same as "Available Slots Matrix (general)" NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) Max. # of slots *1 16 16 16 16 16 *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) The followins is the guide line of the number of cores which should be enabled at A2040b COPT model. A2040b COPT Model CPU Name/Description 4CPU 3CPU 2CPU Max. # of slots *2 Xeon E7-4890v2 Xeon E7-4870v2 Xeon E7-8891v2 Xeon E7-4820v2 Xeon E7-4830v2 # of Cores needed to be enabled *1 45 cores or more 25 cores or more 36 cores or more 16 cores or more 23 cores or more 11 cores or more 16 16 16 16 Xeon E7-4860v2 Xeon E7-8893v2 Xeon E7-4809v2 16 cores or more 12 cores or more 8 cores or more 16 *1 By using PCI card spending less I/O space, the number of Cores needed to be enabled becomes less. *2 Max. number of slots depends on the number of CPU: Max. slot (2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) NEC Corporation Revision 11.0 – December 2015 68 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Product Code A2020b Model CPU Xeon E7-4890v2 Xeon E7-4870v2 Name/Description RAID Controller NE3303-168 (1GB, RAID 0/1/5/6/10/50/60) RAID Controller NE3303-173 (512MB, RAID 0/1/5/6/10/50/60) RAID Controller NE3303-H001 (1GB, RAID 0/1/5/6/10/50/60) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) Xeon E7-4860v2 Xeon E7-8891v2 Xeon E7-4830v2 Xeon E7-4820v2 Xeon E7-8893v2 Xeon E7-4809v2 Same as "Available Slots Matrix (general)" Max. 8 ports in total per CPU NE3390-157A NE3390-158A NE3390-153 NE3390-154 NE3303-142 Same as "Available Slots Matrix (general)" Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2port) (16Gbps/Optical) Fibre Channel Controller (1port) (8Gbps/Optical) Fibre Channel Controller (2port) (8Gbps/Optical) SAS Controller (6Gb/s SAS) Max. 2 ports in total per CPU Max. 1 port in total per CPU Same as "Available Slots Matrix (general)" NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) Max. # of slots *1 10 *2 8 *2 16 16 16 Xeon E7-4820v2 Xeon E7-8893v2 Xeon E7-4809v2 *1 Max. number of slots is 16. *2 By using PCI card spending less I/O space, the max. number will be increased to 16. Product Code A2010b Model CPU Xeon E7-4890v2 Xeon E7-4870v2 Xeon E7-4860v2 Xeon E7-8891v2 Xeon E7-4830v2 Name/Description NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3390-157A NE3390-158A NE3390-153 Same as "Available Slots Matrix (general)" Max. 8 ports in total per CPU Same as "Available Slots Matrix (general)" Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2port) (16Gbps/Optical) Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) Max. 2 ports in total per CPU Max. 1 port in total per CPU Same as "Available Slots Matrix (general)" NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) Max. # of slots *1 6 *2 4 *2 9 9 9 *1 Max. number of slots is 9. *2 By using PCI card spending less I/O space, the max. number will be increased to 9. NEC Corporation Revision 11.0 – December 2015 69 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Installation Limitations for VMware For VMware environment, PCI cards have limitations as for the number of the cards to be installed, depending on the combination of the PCI cards. Please refer below for the details. (1) VMware ESXi 6.0 0/1x RAID Card Product Code Model CPU Name/Description NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3304-138 1000BASE-T Adapter (1port) A2040b/A2020b/A2010b/A1040b All CPUs - ・1Gb: Max. 16 ports in total ・10Gb: Max. 8 ports in total Same as "Available Slots Matrix (general)" NE3304-132 NE3390-157A NE3390-158A Note ・1Gb + 10Gb combination: Max. 8 ports for 10Gb and Max. 4 ports for 1Gb 1000BASE-T Adapter (2port) Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2port) (16Gbps/Optical) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) Max. # of slots *1 ・Max. 8 cards in total ・Max. 16 ports in total 16 *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) NEC Corporation Revision 11.0 – December 2015 70 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b (2) VMware ESXi5.5 1x RAID Card Product Code NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3390-157A NE3390-158A A2040b/A2020b/A2010b/A1040b All CPUs Model CPU Name/Description Fibre Channel Controller (1port) (16Gbps/Optical) Fibre Channel Controller (2port) (16Gbps/Optical) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) Max. # of slots *1, *2 Note Max. 1 card in total Max. 1 card in total Max. 1 card in total not available Max. 2 cards in total Max. 4 cards in total - ・1Gb: Max. 16 ports in total ・10Gb: Max. 8 ports in total ・1Gb + 10Gb combination: Max. 8 ports for 10Gb and Max. 4 ports for 1Gb Max. 10 cards in total Max. 7 cards in total Max. 4 cards in total ・Max. 8 cards in total ・Max. 16 ports in total Max. 2 cards Max. 2 cards Max. 2 cards 13 12 11 - *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) *2 By using PCI card spending less I/O space, the max. number will be increased 0x RAID Card Product Code NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-133 1000BASE-T Adapter (4port) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3304-138 1000BASE-T Adapter (1port) NE3304-132 1000BASE-T Adapter (2port) NE3390-157A Fibre Channel Controller (1port) (16Gbps/Optical) NE3390-158A Fibre Channel Controller (2port) (16Gbps/Optical) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 A2040b/A2020b/A2010b/A1040b All CPUs Model CPU Name/Description SAS Controller Max. # of slots *1, *2 Note na na na na Max. 2 cards in total Max. 4 cards in total - ・1Gb: Max. 16 ports in total ・10Gb: Max. 8 ports in total ・1Gb + 10Gb combination: Max. 8 ports for 10Gb and Max. 4 ports for 1Gb Max. 12 cards in total Max. 9 cards in total Max. 5 cards in total ・Max. 8 cards in total ・Max. 16 ports in total Max. 2 cards 14 Max. 2 cards 13 Max. 2 cards 11 - *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) *2 By using PCI card spending less I/O space, the max. number will be increased NEC Corporation Revision 11.0 – December 2015 71 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b (3) VMware ESXi 5.1 1x RAID Card Product Code A2040b/A2020b/A2010b/A1040b All CPUs Model CPU Name/Description NE3303-168 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-133 1000BASE-T Adapter (4port) Note Max. 1 card in total Max. 1 card in total Max. 1 card in total not available Max. 2 cards in total Max. 4 cards in total - NE3304-128 10GBASE Adapter (SFP+/2ch) ・1Gb: Max. 16 ports in total ・10Gb: Max. 8 ports in total NE3304-138 1000BASE-T Adapter (1port) ・1Gb + 10Gb combination: Max. 8 ports for 10Gb and Max. 4 ports for 1Gb NE3304-132 1000BASE-T Adapter (2port) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller Max. # of slots *1, *2 Max. 10 cards in total Max. 6 cards in total Max. 2 cards in total ・Max. 8 cards in total ・Max. 16 ports in total Max. 2 cards 13 Max. 2 cards 11 Max. 2 cards 9 - *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) *2 By using PCI card spending less I/O space, the max. number will be increased 0x RAID Card Product Code NE3303-168 A2040b/A2020b/A2010b/A1040b All CPUs Model CPU Name/Description RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3303-173 RAID Controller (512MB, RAID 0/1/5/6/10/50/60) NE3303-H001 RAID Controller (1GB, RAID 0/1/5/6/10/50/60) NE3304-133 1000BASE-T Adapter (4port) Note na na na not available Max. 2 cards in total Max. 4 cards in total - NE3304-128 10GBASE Adapter (SFP+/2ch) ・1Gb: Max. 16 ports in total ・10Gb: Max. 8 ports in total NE3304-138 1000BASE-T Adapter (1port) ・1Gb + 10Gb combination: Max. 8 ports for 10Gb and Max. 4 ports for 1Gb NE3304-132 1000BASE-T Adapter (2port) NE3390-153 Fibre Channel Controller (1port) (8Gbps/Optical) NE3390-154 Fibre Channel Controller (2port) (8Gbps/Optical) NE3303-142 SAS Controller (6Gb/s SAS) Max. # of slots *1, *2 Max. 11 cards in total Max. 8 cards in total Max. 4 cards in total ・Max. 8 cards in total ・Max. 16 ports in total Max. 2 cards not available Max. 2 cards 13 10 10 - *1 Max. number of slots depends on the number of CPU: Max. slot (1CPU: 4slots, 2CPU: 9slots, 3CPU:13slots, 4CPU:16slots) *2 By using PCI card spending less I/O space, the max. number will be increased NEC Corporation Revision 11.0 – December 2015 72 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b ■PCI Card: Priority/Order of Installation Standard BTO Configuration: Starting from the PCI cards with higher priority (see the table below), PCI cards are installed to the PCI slots with higher priority among the available slots per CPU configuration (see the table below). The following basic rules are applied to BTO configuration. If any other specific installation requirements, BTO configuration will not be applied. [Basic Rules for PCI Card Installation] st The 1 RAID Controller needs to be installed to Slot#1. The 2 RAID Controller (if any) will not be installed (out of BTO configuration) When External RAID Controller has Flash Backup Unit (FBU), the External RAID Controller will not be installed (out of BTO configuration). When the number of available PCI slot is 9, up to 8x 1000BASE-T Adapter (4 port) can be installed. When the number of available PCI slot is 13, up to 12x 1000BASE-T Adapter (4 port) can be installed, AND nd PCI card requiring IO space should be 8 or less except RAID Controller. When the number of available PCI slot is 16, up to 15x 1000BASE-T Adapter (4 port) can be installed, AND PCI card requiring IO space should be 8 or less except RAID Controller. Priority of PCI Cards: Priority Product Number NE3303-168 Product Name/Description Slot for Installation RAID Controller (1GB) 1 Can install to Slot #1 only NE3303-173 RAID Controller (512MB) NE3304-132 1000BASE-T Adapter (2 port) NE3304-138 1000BASE-T Adapter (1 port) NE3390-153 Fibre Channel Controller (8G/1 port) NE3303-142 SAS Controller NE3303-H001 External RAID Controller (1GB, w/o FBU) NE3390-158A Fibre Channel Controller (16G/ 2port) NE3390-157A Fibre Channel Controller (16G/1 port) NE3390-154 Fibre Channel Controller (8G/2 port) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) 2 3 4 5 NEC Corporation Revision 11.0 – December 2015 Can install to any slot other than Slot #8 and #9 Can install to any slot other than Slot #8 and #9 73 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b 6 NE3304-133 1000BASE-T Adapter (4 port) Priority of PCI Slots: PCI Slot High Low Number of Available Slots (per CPU configuration) 4 9 13 16 #1 Y Y Y Y #9 N Y Y Y #10 N N Y Y #14 N N N Y #3 Y Y Y Y #2 N Y Y Y #11 N N Y Y #15 N N N Y #4 Y Y Y Y #6 N Y Y Y #12 N N Y Y #16 N N N Y #5 Y Y Y Y #7 N Y Y Y #13 N N Y Y #8 N Y Y Y NOTE: The 2nd RAID Controller will not be installed (out of BTO Configuration) NEC Corporation Revision 11.0 – December 2015 74 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b With PCI Card Customized Configuration Service (NE3300-SV401) Starting from the PCI cards with higher priority (see the table below), PCI cards are installed to the PCI slots with higher priority among the available slots per CPU configuration (see the table below). The following basic rules are applied to BTO configuration. If any other specific installation requirements, BTO configuration will not be applied. Please order this customized service when no HDD is included in the ordered configuration for FC SAN boot. Please order this customized service when connecting Flash Back-up Unit to External RAID Controller. [Basic Rules for PCI Card Installation] When the number of available PCI slot is 13, PCI cards requiring IO space should be 10 at maximum. When the number of available PCI slot is 16, PCI cards requiring IO space should be 13 at maximum. The 1 RAID Controller needs to be installed to Slot#1. The 2 RAID Controller (if any) will not be installed (out of BTO configuration) 1000BASE-T Adapter, 1 port and 2 port, needs to be installed to Slot#9 (or, in case of 1CPU configuration, Slot#5) External RAID Controller should be installed to Slot#5, #8, #12 or #16. st nd Priority of PCI Cards: Priority Product Number Product Name/Description NE3303-168 RAID Controller (1GB) NE3303-173 RAID Controller (512MB) NE3304-132 (1st) 1000BASE-T Adapter (2 port) NE3304-138 (1st) 1000BASE-T Adapter (1 port) NE3303-H001 (+ NE3303-H002) External RAID Controller (1GB) (+ FBU) NE3390-158A Fibre Channel Controller (16G/ 2port) NE3390-157A Fibre Channel Controller (16G/1 port) NE3390-154 Fibre Channel Controller (8G/2 port) NE3390-153 Fibre Channel Controller (8G/1 port) NE3303-142 SAS Controller NE3303-H001 External RAID Controller (1GB, w/o FBU) NE3304-128 10GBASE Adapter (SFP+/2ch) NE3318-H002F PCIe SSD Adapter (1.1TB) NE3318-H003F PCIe SSD Adapter (2.2TB) NE3304-133 1000BASE-T Adapter (4 port) NE3304-132 (2nd and more) 1000BASE-T Adapter (2 port) Can install to Slot #1 only 1 2 3 4 5 6 Slot for Installation 1st card can install to Slot #9 only (or in case of 1CPU configuration, #5) Can install to Slot #5,#8,#12 and #16 only Can install to any slot other than Slot #8 and #9 Can install to any slot other than Slot #8 and #9 7 NEC Corporation Revision 11.0 – December 2015 75 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b NE3304-138 (2nd and more) 1000BASE-T Adapter (1 port) Priority of PCI Slots: PCI Slot High Low Number of Available Slots (per CPU configuration) 4 9 13 16 #1 Y Y Y Y #9 N Y Y Y #8 N Y Y Y #16 N N N Y #12 N N Y Y #5 Y Y Y Y #2 N Y Y Y #14 N N N Y #10 N N Y Y #3 Y Y Y Y #11 N N Y Y #15 N N N Y #13 N N Y Y #6 N Y Y Y #7 N Y Y Y #4 Y Y Y Y NOTE: The 2nd RAID Controller will not be installed (out of BTO Configuration) NEC Corporation Revision 11.0 – December 2015 76 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b ■RAS Feature Matrix (per OS) (2/1) RAS Features A2040b A2020b A2010b A1040b Note EL6.4 x64 or later Y Y Y Y *1 OL6.4x64 or later CPU Core Predictive WS2012/R2 Failure Analysis (PFA) WS2008R2 Y Y Y Y *1 Y Y Y Y *2 Y Y Y Y *2 ESXi5.1/5.5/6.0 N N N N EL6.4 x64 or later Y Y Y N *1 OL6.4x64 or later Y Y Y N *1 WS2012/R2 N N N N WS2008R2 N N N N ESXi5.1/5.5/6.0 N N N N EL6.4 x64 or later Y Y Y N *1 OL6.4x64 or later Y Y Y N *1 WS2012/R2 Y Y Y Y *2 WS2008R2 Y Y Y Y *2 ESXi5.1/5.5/6.0 Y Y Y Y EL6.4 x64 or later Y Y Y Y OL6.4x64 or later Y Y Y Y WS2012/R2 Y Y Y Y WS2008R2 Y Y Y Y ESXi5.1 N N N N ESXi5.5/6.0 Y Y Y Y EL6.4 x64 or later N N N N OL6.4x64 or later N N N N WS2012/R2 N N N N WS2008R2 N N N N ESXi5.1/5.5/6.0 N N N N Dynamic CPU Core De-allocation Dynamic Memory Page De-allocation MCA Recovery PCIe Error Recovery / PCIe Error Handling NEC Corporation OS Revision 11.0 – December 2015 *5 *5 *5 77 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b (2/2) RAS Features A2040b A2020b A2010b A1040b Note EL6.4 x64 or later Y N N N *7 Static COPT; re-boot required OL6.4x64 or later Y N N N *7 WS2012/R2 Y N N N *8 (COPT Model) WS2008R2 Y N N N *8 ESXi5.1/5.5/6.0 Y N N N EL6.5x64 Y N N N EL6.4x64 N N N N OL6.4x64 or later N N N N WS2012/R2 N N N N WS2008R2 N=>Y N N N ESXi5.1/5.5/6.0 N N N N EL6.5x64 or later Y N N N EL6.4x64 N N N N OL6.4x64 or later N N N N WS2012/R2 N N N N WS2008R2 N N N N ESXi5.1/5.5/6.0 N N N N EL6.5 x64 N N N N EL6.4 x64 N N N N OL6.4x64 or later N N N N WS2012/R2 TBD TBD TBD N WS2008R2 N=>Y N=>Y N=>Y N ESXi5.1/5.5/6.0 N N N N EL6.4 x64 or later Y Y Y N OL6.4x64 or later Y Y Y N WS2012/R2 Y Y Y N WS2008R2 Y Y Y N ESXi5.1/5.5/6.0 N N N N Dynamic COPT: Core Enabling (COPT Model) Dynamic COPT: Core Sparing (COPT Model) Memory Hot-ADD PCIe Hot-Add PCIe Hot-Remove NEC Corporation OS Revision 11.0 – December 2015 *1 *3*9 *1 *1*9 *6*9 78 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Legend for OS EL6.5x64 Red Hat Enterprise Linux 6.5(x86_64) EL6.4x64 Red Hat Enterprise Linux 6.4(x86_64) OL6.4x64 Oracle Linux6.4/UEK R2(x86_64) WS2012/R2 Windows Server 2012 and Windows Server 2012R2 WS2008R2 Windows Server 2008 R2 SP1 ESXi5.1 VMware ESXi 5.1 update2, ESXi 5.1 update3 ESXi5.5 VMware ESXi 5.5, ESXi 5.5 update 1, ESXi 5.5 update2 ESXi6.0 VMware ESXi 6.0 NOTE: *1 *2 *3 *4 *5 *6 *7 *8 *9 Please install the necessary module according to the documents; “Machine Check Monitoring Service User's Guide” “Capacity Optimization (COPT) User's Guide for Linux” They are additional modules for a specific kernel version. Please install spport kit (UPDATE module) in the EXPRESSBUILDER. With Windows Seamless Install, the necessary modules are automatically installed. Please install the necessary module according to the documents; “Machine Check Monitoring Service User's Guide” “Capacity Optimization (COPT) User's Guide for Windows” (intentionally blank) Uncorrectable error detected by memory patrol can be recovered, but error recovery for L1 cache is not supported. Please install the necessary module according to the document “MR HotA-add User's Guide for Windows”. As an option, if you install the necessary module acccording to the documents; “Machine Check Monitoring Service User's Guide” “Capacity Optimization (COPT) User's Guide for Linux”, then, core allocation among CPUs can be adjusted. They are additional module for a specific kernel version. As an option, if you install the necessary module according to the documents “Capacity Optimization (COPT) User's Guide for Windows”, core allocation among CPUs can be adjusted. Planned to be supported later NEC Corporation Revision 11.0 – December 2015 79 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Linux is a trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less. NEC Corporation Revision 11.0 – December 2015 80 CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b Revision History Revision Date Description 1.0 February 2014 Initial Release 2.0 April 2014 Updates 3.0 June 2014 Updates (RAS Feature Matrix) 4.0 July 2014 Updates (Windows Server 2012 R2 supported) 5.0 September 2014 Updates (4TB support) 6.0 October 2014 Updates (RAS Feature Matrix) 7.0 December 2014 Updates 8.0 April 2015 Updates 9.0 May 2015 Update (PCIe SSD updated) 10.0 August 2015 Updates (RHLE6.6 and VMware ESXi6.0 supported, etc.) 11.0 December 2015 Updates (Oracle Linux 6.6 support, etc.) NEC Corporation Revision 11.0 – December 2015 81