Specs

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50S-1256
1P4T SOLID STATE RF SWITCH
Frequency Range
30-512 MHz
Configuration
1P4T Reflective
Impedance
50 Ohms nominal
VSWR
1.3:1 maximum
Insertion Loss
0.55 dB maximum
Isolation
50 dB minimum
Switching Speed
60 microseconds
(50% TTL to 10% or 90% RF)
RF Input Power
125 Watts average (Cold switch)
500 Watts peak (1usec pulse)
20 Watts average
(Hot switch)
Control Logic (4 Lines)
TTL "High" on control line corresponding
to port desired.
TTL "Low" on remaining three ports.
DC Supply
+15 Vdc @ 550 mA nominal
+5 Vdc @ 100 mA nominal
RF Connector
SMA, TNC or N female
DC Connector
Solder Terminals
Operating Temperature Range
-40ºC to +125ºC
Storage Temperature Range
-55ºC to +125ºC
Physical Size
See outline drawing 092-3948
ECR/ECN #
Page 1 of 1
DATE
REV
2922
01/18/2002
03/13/2002
A
2992
05/14/2002
B
APPR / DATE
ECR/ECN #
9999
JFW FORM E-7-F REV F
DATE
02/10/2003
REV
C
APPR / DATE
BAC 03/03/2004