Specs

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50S-1801
1P4T SOLID STATE RF SWITCH
Frequency Range
30-512 MHz
Configuration
1P4T
Impedance
50 Ohms nominal
VSWR
1.4:1 maximum
Insertion Loss
0.40 dB typical 30-100MHz
0.60 dB typical 100-512MHz
0.75 dB maximum 30-512MHz
Isolation
50 dB minimum
Switching Speed
20 microseconds
(50% TTL to 10% or 90% RF)
40 microseconds
(50% TTL to specified isolation)
RF Input Power
200 Watts average (Cold switch)
500 Watts peak (1 usec pulse)
20 Watts average
Hot switch
Control Logic (3 Lines)
TTL per 092-5238
TTL "Low" = (0-0.8Vdc)
TTL "High" = (2.0-5.0Vdc)
DC Supply
+15 Vdc @ 450 mA nominal
and
+5 Vdc @ 175 mA nominal
RF Connector
SMA, TNC or N female
DC Connector
solder terminals
Operating Temperature Range
-20ºC to +70ºC
Storage Temperature Range
-55ºC to +85ºC
Physical Size
See outline drawing 092-5238
ECR/ECN #
DATE
11/06/2008
Page 1 of 1
REV
APPR / DATE
ECR/ECN #
BAC 11/06/2008
JFW FORM E-7-F REV F
DATE
REV
APPR / DATE