NEC Storage WB series

NEC Storage Series
March 2015
Fibre Channel Switches
NEC Storage WB Series
Integrate your storage with SAN*.
NEC's Fibre Channel switches enable flexible system
expansion and integration.
Fibre Channel switches
WB6510
WB340A/WB330A/
WB310A
WB6505
*SAN: Storage Area Network
Major features of WB Series
Zoning
Cascade connection
If a storage device is being shared by servers in different OS environ-
The number of switch por ts can be increased by connecting
ments, a WB Series Fibre Channel switch can be used to group
multiple switches to each other. For the NEC Storage WB Series, up
(zone) that storage device with its servers to prevent data loss. The
to four switches can be connected. This increases the number of
WB Series switch renders devices in other zones unrecognizable,
ports to 84 for WB6505, and to 180 for WB6510.
thereby maintaining data security.
WB Series Fibre Channel switches can also be cascade-connected
to a SIGMABLADE 8G FC switch.
*This feature is only supported by WB6510 and WB6505.
NEC Storage WB Series
Fibre Channel switches
WB6510/WB6505 : High-availability Fiber Channel switches for enterprise SAN
WB340A/WB330A/WB310A : Switches for small-scale SAN. These switches can be connected to various types of servers.
Fibre Channel switch
Model
WB6510-048
WB6510-036
WB6510-024
WB6505-024
WB6505-012
Data transfer rate
Non-blocking, full duplex, max. 800 MB/s with 8G-compatible SFP installed,
max. 1600 MB/s with 16G-compatible SFP installed
Number of ports
48
Port type
Media type
36
24
24
WB340A
Non-blocking, full duplex, max. 800 MB/s
with 8G-compatible SFP installed
12
24
8
16
Universal port (F and E ports), automatically recognized
Universal port (FL and F ports), automatically recognized
No limitation on the number of E ports.
E port is not supported.*1
Short-wavelength laser, OM3 FC cable, max. 150 m (8 Gbps) / 100 m (16 Gbps)
Short-wavelength laser,
max. 150 m (4 Gbps) / 50 m (8 Gbps)
Short-wavelength laser, OM2 FC cable, max. 50 m (8 Gbps) / 35 m (16 Gbps)
Availability
WB310A
WB330A
Redundant power supplies and fans
Features
When extended: Redundant power
supplies and fans
Single power supply and redundant fans
Simple name server, zoning, NPIV
19-inch standard rack 1U (437 x 444 x 43)
Dimensions (W x D x H) (mm)
Weight (kg)
9.16 (Not including SFP)
Power voltage
19-inch standard rack 1U (429 x 307 x 43)
7.82 (standard),
9.16 (extended) (Not including SFP)
4.7
(Including SFP)
4.5
(Including SFP)
4.3
(Including SFP)
AC 100 to 240 V, single phase, 50/60 Hz
AC lines
Maximum power
consumption (W)
2
Standard: 1 Extended: 2
1
110
80
57
*1: WB340A, WB330A and WB310Ado not support cascade connection.
Environmental compliance
● RoHS Compliance
This product complies with the European Union’s directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS).
• All products, brands, and trade names used in this document are trademarks or registered trademarks of their respective holders.
Safety notice
Before you use this product, please read carefully and comply with the cautions and warnings in manuals such as Installation Guide and
Safety Precautions. Incorrect use may cause a fire, electrical shock or injury.
For further information, please contact:
Specifications and designs in this catalog are subject to change for improvement without notice.
NEC Corporation
As of March 2015
Cat.No.E11-15030002E