F9307

SAW Bandpass Filter F9307
Features
RF bandpass filter
High attenuation
No matching 50Ω single-ended operation
Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm )
RoHS Compliant
Package Dimensions
1
2
3
I
9307
G64
6
6
1
5
5
2
4
4
3
Pin Configuration
Dimensions shown are nominal in millimeters
2
Input
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
5
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameter
Unit
Minimum
Typical
Maximum
Operating Temperature Range
℃
0
25
70
Storage Temperature Range
℃
-30
25
85
Power Handling Capability
dBm
-
-
10
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
1/7
SAW Bandpass Filter F9307
Preliminary Specifications
Fc = 930 MHz
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
930
-
MHz
Insertion Loss ( 920 ~ 940 MHz )
Insertion Loss ( 925 ~ 938 MHz )
-
2.7
1.5
3.0
2.5
dB
Amplitude Ripple ( 920 ~ 940 MHz )
Amplitude Ripple ( 925 ~ 938 MHz )
-
1.5
0.8
2.0
1.5
dB p-p
VSWR ( 920 ~ 940 MHz )
VSWR ( 925 ~ 938 MHz )
-
1.7
1.7
2.0
2.0
-
Attenuation
0.3 ~ 890 MHz
25
29
970 ~ 2000 MHz
25
32
-
dB
-
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
2/7
SAW Bandpass Filter F9307
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
I2)
93073)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
3/7
SAW Bandpass Filter F9307
Typical Performance ( at 25℃
℃)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
4/7
SAW Bandpass Filter F9307
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
5/7
SAW Bandpass Filter F9307
Packing Specifications
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
6/7
SAW Bandpass Filter F9307
Carrier Tape Dimensions [unit : mm]
A
3.40 ± 0.1
B
3.40 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9307
Rev. Date
2014-04-16
Rev.
AS 01
7/7