SAW Bandpass Filter F1G59 Features RF bandpass filter High attenuation Usable bandwidth 40.0MHz No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package RoHS Compliant Package Dimensions 1 2 I 1G59 3 6 6 1 5 5 2 4 4 3 Pin Configuration mensions shown are nominal in millimeters 2 Input Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range °C -55 25 85 Storage Temperature Range °C -55 Power Handling Capability dBm 95 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 1/7 SAW Bandpass Filter F1G59 Specifications Fc = 1590.0 MHz Terminating source impedance : 50Ω Terminating load impedance : 50Ω Center Frequency ( Fc ) Insertion Loss (Fc ± 20.0 MHz) Amplitude Ripple VSWR (Fc ± 20.0 MHz) Minimum Typical Maximum MHz - 1590.0 - dB - 3.7 4.5 dB - 1.0 1.8 - 1.8 2.5 45 40 40 40 50 45 45 45 - (Fc ± 20.0 MHz) Relative Attenuation DC~ 1200.0 MHz 1200.0MHz ~ 1530.0MHz 1700.0MHz ~ 2000.0MHz 2000.0MHz ~ 3000.0MHz dB Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 2/7 SAW Bandpass Filter F1G59 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 1G593) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 3/7 SAW Bandpass Filter F1G59 Typical Performance ( at 25℃ ℃) CH1 S21 LOG 10 dB/ 12 Aug 2009 03:48:28 3: -3 . 2358 dB 1 610 . 000 000 MHz REF 0 dB CH1 Markers Cor 2: -3 . 4768 dB 1. 57000 GHz 3 2 CENTER 1 590 . 000 000 MHz CH1 S21 LOG 10 dB/ SPAN 500 . 000 000 MHz 12 Aug 2009 04:01:27 3: -3 . 3577 dB 1 610 . 000 000 MHz REF 0 dB 3 CH1 Markers 2: -3 . 6420 dB 1. 57000 GHz 2 Cor START . 010 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 STOP 3 000 . 000 000 MHz Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 4/7 SAW Bandpass Filter F1G59 Input / Output VSWR Charts CH1 S11 SWR 1 / 12 Aug 2009 03:48:39 3: 1. 8624 1 610 . 000 000 MHz REF 1 CH1 S22 SWR 1 / 12 Aug 2009 03:48:55 3: 1. 8544 1 610 . 000 000 MHz REF 1 CH1 Markers CH1 Markers 2: 1. 2262 1. 57000 GHz Cor 2: 1. 2521 1. 57000 GHz Cor 3 3 CENTER 1 590 . 000 000 MHz 2 2 CENTER 1 590 . 000 000 MHz SPAN 500 . 000 000 MHz SPAN 500 . 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 3: 84. 984 12 Aug 2009 03:48:47 2. 1528 nH 1 610 . 000 000 MHz 21. 777 CH1 S22 1 U FS 3: 81. 020 25 . 148 12 Aug 2009 03:49:01 2. 4860 nH 1 610 . 000 000 MHz CH1 Markers 2: 56. 684 -8 . 6035 1. 57000 GHz Cor CH1 Markers 2: 44. 506 -9 . 0977 1. 57000 GHz Cor 3 3 2 CENTER 1 590 . 000 000 MHz 2 SPAN 500 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 CENTER 1 590 . 000 000 MHz SPAN 500 . 000 000 MHz Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 5/7 SAW Bandpass Filter F1G59 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 6/7 SAW Bandpass Filter F1G59 Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G59 Rev. Date 2014-03-19 Rev. NC9008-AS02 7/7