IFL01286

LC Bandpass Filter IFL01286
Features
LC bandpass filter
50Ω single-ended operation
Surface Mounted Package ( 25.4mm × 12.7mm × 6.7mm )
Package Dimensions
SIDE VIEW
TOP VIEW
25.4
IN
ITF
6.7max.
OUT
Part No
12.7
BOTTOM VIEW
2.54
1
2.54
1
6.35
TOLERANCE UNLESS
OTHERWISE SPECIFIED : ±0.3
DIMENSIONS : mm
6.35
GROUND
I/O PORT
Maximum Ratings
Parameter
Unit
Minimum
Typical
Maximum
Operating Temperature Range
℃
-40
25
85
Storage Temperature Range
℃
-40
25
85
Power Handling Capability
Watt
-
-
3.0
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
IFL01286
Rev. Date
2014-10-06
Rev.
AS 01
1/3
LC Bandpass Filter IFL01286
Specifications
Fo = 125 MHz
Minimum
Typical
Maximum
Unit
-
125
-
MHz
Insertion Loss (110~ 140MHz)
-
2.3
2.5
dB
Amplitude Ripple (110~ 140MHz)
-
0.3
0.5
dB
V.S.W.R (110~ 140MHz)
-
1.2
1.4
-
20.0
25.0
-
dB
Center Frequency (
Fo
)
Relative Attenuation
@ 90
MHz
Input/Output Impedance
50
Ohm
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
IFL01286
Rev. Date
2014-10-06
Rev.
AS 01
2/3
LC Bandpass Filter IFL01286
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
Part No 1)
1) Part Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
IFL01286
Rev. Date
2014-10-06
Rev.
AS 01
3/3