DATA SHORT To request the full datasheet, please visit www.intersil.com/products/TW9984 4-Channel Video Decoder and Video Encoder for Automotive Applications TW9984 The TW9984 includes four high quality NTSC/PAL/SECAM video decoders that convert analog composite video signal to digital component YCbCr data. Each channel contains a 10-bit ADC with application selectable differential or single-ended analog video input options, proprietary clamp and gain controllers and utilizes 4H comb filter for separating luminance and chrominance to reduce cross noise artifacts. The TW9984 adopts the image enhancement techniques, such as IF compensation filter, CTI and programmable peaking. TW9984 also includes an NTSC/PAL video encoder with a 10-bit DAC to support CVBS output. • IF compensation filter for improvement of color demodulation • Color Transient Improvement (CTI) • Automatic white peak control • Programmable hue, saturation, contrast, brightness and sharpness • Proprietary fast video locking system for non-real-time application • Supports the standard ITU-R BT.656 format or time multiplexed output with 54/108MHz • Supports a two-wire serial host interface Related Literature • Integrated video encoder and 10-bit video CMOS DAC • UG018, “TW9984AT-NA1-GE-EVAL Evaluation Board User Guide” • Integrated clock PLL for 108MHz clock output Features • Ultra low power consumption (typical 550mW) • Accepts all NTSC (M/4.43)/PAL (B/D/G/H/I/K/L/M/N/60)/ SECAM standards with auto detection • 1.2V/3.3V power supply • Short-to-battery, short-to-ground detection • Single 27MHz crystal for all standards and output options • Optional 1.8V operation of digital output • High performance adaptive 4H comb filters for all NTSC/PAL standards • AEC-Q100 qualified VIN3A VIN3B MUX DIAG2 VIN4A VIN4B DIAG4 VOUT MUX DIAG3 ADC ADC 4H COMB VIDEO DE CO DE R ADC DECIMATION FILTE R ADC ADC 4H COMB VIDEO DE CO DE R ADC DECIMATION FILTE R ADC ADC 4H COMB VIDEO DE CO DE R ADC DAC BT.656 INTERFACE MPP INTERFACE VIN2B ADC MUX VIN2A 4H COMB VIDEO DE CO DE R CLO CK PLL CLO CK GENERATOR DIAG1 ADC ADC HOST INTERFACE VIN1B • 10mmx10mm 68 Ld WQFN package VD[7:0] MPP CLKO XTO XTI SCLK SDAT IRQ SHORT DETECTION VIN1A MUX • Integrated four video analog antialiasing filters and 10-bit CMOS ADCs with differential and single-ended inputs DIG ITAL VIDE O ENCODER ENCLK ED[7:0] FIGURE 1. TW9984 FUNCTIONAL BLOCK DIAGRAM April 7, 2016 FN8710.3 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2014, 2015, 2016. All Rights Reserved Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners. TW9984 For additional products, see www.intersil.com/en/products.html Intersil Automotive Qualified products are manufactured, assembled and tested utilizing TS16949 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com Submit Document Feedback 2 FN8710.3 April 7, 2016