HUAAN LIMITED SMD1210 Series Resettable Fuse PTC Features Radial leaded devices. Over-current protection High voltage surge capabilities Flame retardant epoxy polymer insulating material meets UL94 V-0 requirement. Available in lead-free version. Meets MSL level 1, per J-STD-020 Dimensions(3225mm / 1210 mils) Model Unit: mm A Fast Delivery Time B C D E Min max Min Max Min Max Min Min JK-SMD1210-005 3.00 3.43 2.35 2.80 0.60 1.25 0.15 0.10 JK-SMD1210-010 3.00 3.43 2.35 2.80 0.60 1.25 0.15 0.10 JK-SMD1210-020 3.00 3.43 2.35 2.80 0.50 1.00 0.15 0.10 JK-SMD1210-035 3.00 3.43 2.35 2.80 0.35 0.85 0.15 0.10 JK-SMD1210-035-30V 3.00 3.43 2.35 2.80 0.35 1.00 0.15 0.10 JK-SMD1210-050 3.00 3.43 2.35 2.80 0.35 0.85 0.15 0.10 JK-SMD1210-075 3.00 3.43 2.35 2.80 0.35 0.85 0.15 0.10 JK-SMD1210-110 3.00 3.43 2.35 2.80 0.40 1.10 0.15 0.10 JK-SMD1210-110-12V 3.00 3.43 2.35 2.80 0.40 1.40 0.15 0.10 JK-SMD1210-150 3.00 3.43 2.35 2.80 0.60 1.40 0.15 0.10 JK-SMD1210-175 3.00 3.43 2.35 2.80 0.60 1.40 0.15 0.10 JK-SMD1210-200 3.00 3.43 2.35 2.80 0.60 1.60 0.15 0.10 HUAAN LIMITED 1 www.huaandz.com HUAAN LIMITED SMD1210 Series Electrical characteristics(25℃) Part Number Ih (A) It (A) Vmax (V) Imax Pd(W) (A) Trip Current(A) Trip Rmin Time(S) (Ω) R1max (Ω) JK-SMD1210-005 0.05 0.15 60 100 0.6 0.25 1.50 2.8 50 JK-SMD1210-010 0.10 0.30 60 100 0.6 0.50 0.60 0.8 15 JK-SMD1210-020 0.20 0.40 30 100 0.6 8.0 0.02 0.40 5 JK-SMD1210-035 0.35 0.75 30 100 0.6 8.0 0.20 0.20 1.3 JK-SMD1210-035-30V 0.35 0.75 16 100 0.6 8.0 0.20 0.20 1.3 JK-SMD1210-050 0.50 1.00 13.2 100 0.6 8.0 0.10 0.18 0.9 JK-SMD1210-075 0.75 1.50 6 100 0.6 8.0 0.10 0.07 0.4 JK-SMD1210-110 1.10 2.20 6 100 0.6 8.0 0.30 0.05 0.21 JK-SMD1210-110-12V 1.10 2.20 12 100 0.8 8.0 0.30 0.05 0.25 JK-SMD1210-150 1.50 3.00 6 100 0.8 8.0 0.50 0.03 0.21 JK-SMD1210-175 1.75 3.50 6 100 0.8 8.0 0.60 0.02 0.08 JK-SMD1210-200 2.00 4.00 6 100 0.8 8.0 1.00 0.015 0.07 ·IH = Hold current: maximum current device will pass without tripping in 25℃ still air. ·IT = Trip current: minimum current at which the device will trip in 25℃ still air. ·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current. ·IMAX = Maximum fault current device can withstand without damage at rated voltage. ·RMAX = Maximum resistance of device in initial (un-soldered) state. ·RMIN = Minimum resistance of device in initial (un-soldered) state. Operating temperature: -40℃ ~+85℃ Specifications are subject to change without notice HUAAN LIMITED [email protected] 2 www.huaandz.com Packing quantity:3000PCS [email protected] Tel:+86-755-27465585