TWN3 NFC Starter Kits 13.56MHz Contactless Reader/Writer TWN3 Desktop Reader Snap-In Holder ISO Cards Key Fobs The family of TWN3 RFID transponder readers/writers is designed for easy integration into various applications. It supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, INSIDE etc. and ISO standards like ISO14443A including ISO14443A-4 (T=CL), ISO14443B including ISO14443B-4 (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). The TWN3 NFC starter kits provide the tools, documentation and code samples required to successfully integrate and develop contactless smart card applications. The Mifare NFC starter kit contains one ISO/IEC 7816 slot - SAM (Secure Access Modul) for improved security and cryptography. Only the TWN3 Mifare NFC reader is prepared for future NFC, however, as of today there is no specific NFC firmware inside. Article The TWN3 Mifare NFC Starter Kit consists of: 1x ART13529 TWN3 Mifare NFC Desktop, USB, black 1x ART13512 Snap In Holder incl. adhesive pads 2x Mifare Ultralight C Cards (NFC Forum Tag Type 2) 2x Mifare DESFire EV1 Cards (NFC Forum Tag Type 4) 2x Mifare Classic Keyfobs Order code 1x CD with Drivers, Sample Source Code, Demos, Datasheets, Documentation ART14071 Article The TWN3 Legic NFC Starter Kit consists of: 1x ART13857 TWN3 Legic NFC Desktop, USB, black 1x ART13512 Snap In Holder incl. adhesive pads 2x Legic Advant Cards 2x Mifare DESFire EV1 Cards (NFC Forum Tag Type 4) 2x Mifare Classic Keyfobs 1x CD with Drivers, Sample Source Code, Demos, Datasheets, Documentation Order code Comment: In order to use the original Legic commands you need to be a Legic licensee. ART14073 Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification © 2012 Elatec GmbH – V2.2 – 09/2012 Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com